Successfully reported this slideshow.
We use your LinkedIn profile and activity data to personalize ads and to show you more relevant ads. You can change your ad preferences anytime.

Design presentation

130 views

Published on

5th semester design engineering-Design analysis in short-Mentor
Dr Kurian Antony

Published in: Design
  • Be the first to comment

  • Be the first to like this

Design presentation

  1. 1. DESIGN PRESENTATION FIRST INTERNAL EVALUATION SEPT 17
  2. 2. IN FRONT OF YOU…  HASEEB K M  HRISHIKESH MOHAN  JITHIN O CHACKO  JOEL JOY
  3. 3. SELECTED PRODUCTS  WATCH  APPLE IPHONE 6S  WATER COOLER/DISPENSER
  4. 4. WATCH  A watch is a small device which is used to determine the time and sometimes date intended to be carried or worn by a person.  It is designed to keep working despite the motions caused by the person's activities  A wristwatch is designed to be worn around the wrist, attached by a watch strap or other type of bracelet. 1
  5. 5. PARTS OF A WATCH
  6. 6. DESIGN ANALYSIS  Most of the space utilized by watch is utilized by the case of watch. It is seen behind the watch.  The crown is what is used to change the time. The maximum size is 3mm.  Proper clearance of approximately 0.5mm is provided for the easiness in time as well as date adjustments.  The primary strap will be larger than the secondary strap.  The buckle must be strong enough and its width must be less than or equal to the strap.  For rubber like straps, strap retainers are provided such that excess strap is get retained.  The hour hand is usually shorter in size than the minute hand.  In most modern watches, the crystal will be a convex lens such that the readability will be improved.
  7. 7. APPLE IPHONE 6S  Apple iPhone 6s (stylized and marketed as iPhone 6s and iPhone 6s Plus) are smartphones designed, developed and marketed by Apple Inc.  Middle, Upper classes and professional people brought the phone. 2
  8. 8. PARTS OF IPHONE 6S
  9. 9. DESIGN ANALYSIS  Follows a bend gate design.  Constructed with new 7000 series aluminium alloy which imparts more strength to chassis.  Touchscreen Integrated circuits were re-located to the display assembly.  Comes with 2GB RAM and LTE support than previous model.  The display size is 4.7 inch (diagonal)-(720*1334) pixels.  The iPhone 6S is heavier than its predecessor.  The loudspeaker is provided at the bottom portion along with a 3.5mm standard audio jack along with microphone.  The iPhone 6S features a 12-megapixel rear-facing camera.  The overall body dimension is 138.3 x 67.1 x 7.1 mm (5.44 x 2.64 x 0.28 in) and its weight is 143 grams.  The invisible proximity sensors improves the ergonomics of front view.
  10. 10. DESIGN ANALYSIS  The volume and power buttons are mounted on the sides of the phone such that functionality is increased.  The primary camera is mounted at the rear with an additional microphone.  The LED flash is at the back side of phone along with primary camera.  The back of the device is crafted from anodized aluminum.  The chamfered edges introduced with the iPhone 4 have been replaced with smoother and sleeker curves that call back to the original iPhone design.  Besides the relocated power button, which is now on the right side of the device instead of at the top, the iPhone appears stretched compared to previous models.
  11. 11. WATER COOLER/DISPENSER  A water cooler or water dispenser is a device that cools and dispenses water.  They are generally broken up in two categories - bottle less and bottled water coolers.  Bottle less water coolers are connected to a water supply, while bottled water coolers require delivery (or self-pick-up) of water in large bottles from vendors.  Water cooler may also refer to a primitive device for keeping water cool. 3
  12. 12. PARTS OF WATER COOLER/DISPENSER
  13. 13. DESIGN ANALYSIS  This method of designing is called free standing.  These coolers use air pumps to push the water into the cooling chamber and Peltier devices to chill the water.  The overall dimensions are 37*12.2*12.6 inches with a weight of 15 kg without water.  These machines come in different sizes and vary from table units, intended for occasional use to floor-mounted units intended for heavier use.  On the front, a lever or pushbutton dispenses the water into a cup held beneath the spigot.  The system is generally a leak proof design.  A handle of 60mm is provided for easy opening.  Proprietary technology provides energy efficiency, reliability and low noise.  For the safety of device and children a child safety lock is included in tapings.
  14. 14. QUERIES

×