ORACLE RAC

1. SRVCTL Commands
srvctl modify service -d db_unique_name -s service_name -i old_inst_name
-t new_inst_name [-f]
Table E–35 srvctl modify service Options for an Available Instance
Option Description
Unique name for the database.
-d db_unique_name
Service name.
-s service_name
Old instance name.
-i old_inst_name
New instance name.
-t new_inst_name
Disconnect all sessions during stop or relocate service
-f
operations.
You can also use the srvctl modify service command to change an available
instance to a preferred instance as follows:
srvctl modify service -d db_unique_name -s service_name -i avail_inst_name -r [-f]
Table E–36 srvctl modify service Options for Changing an Available Instance to
Preferred
Option Description
Unique name for the database.
-d db_unique_name
Service name.
-s service_name
Instance name.
-i avail_inst_name
Upgrade instance to preferred.
-r
Disconnect all sessions during stop or relocate service
-f
operations.
Examples An example of moving a service member from one instance to another is:
srvctl modify service -d crm -s crm -i crm1 -t crm2
An example of changing an available instance to a preferred instance is:
srvctl modify service -d crm -s crm -i crm1 -r
To change the status of multiple instances, you can use the srvctl modify
service command to list which instances are to be the preferred and which are to be
the available instances for a service as follows:
srvctl modify service -d db_unique_name -s service_name -n -i pref_inst_list [-a
avail_inst_list] [-f]
Table E–37 srvctl modify service Options for Changing Instances between Preferred
and Available status
Option Description
Unique name for the database.
-d db_unique_name
Service name.
-s service_name
Server Control Utility Reference E-23

2. SRVCTL Commands
Table E–37 (Cont.) srvctl modify service Options for Changing Instances between
Preferred and Available status
Option Description
Uses only the instances named for this service (unnamed
-n
instances already assigned to the service are removed).
List of preferred instances.
-i avail_inst_name
List of available instances.
-a avail_inst_list
Disconnect all sessions during stop or relocate service
-f
operations.
Example An example of this command to exchange a preferred and available instance
is:
srvctl modify service -d crm -s crm -n -i crm1 -a crm2
srvctl modify nodeapps
Applies a new Oracle home or virtual IP address to nodeapps.
Syntax and Options Use the srvctl modify nodeapps command with the following
syntax:
srvctl modify nodeapps -n node_name [-o oracle_home] [-A new_vip_address]
Table E–38 srvctl modify nodeapps Option
Option Description
Node name.
-n node_name
Oracle home for the cluster database.
-o oracle_home
The node level VIP address (name|ip/netmask[/if1[|if2|...]]).
-A new_vip_address
Example An example of this command is:
srvctl modify nodeapps -n mynode1 -A 100.200.300.40/255.255.255.0/eth0
srvctl relocate
Relocates the named service names from one named instance to another named
instance. The srvctl relocate command works on only one source instance and
one target instance at a time, relocating a service from a single source instance to a
single target instance. The target instance must be on the preferred or available list for
the service. The relocated service is temporary until you modify the configuration. The
srvctl modify command described on page E-24 permanently changes the service
configuration.
Table E–39 srvctl relocate Summary
Command Description
srvctl relocate service on page E-25 Relocates the named service names from one named instance to
another named instance
E-24 Oracle Clusterware and RAC Administration and Deployment Guide

3. SRVCTL Commands
srvctl relocate service
Temporarily relocates a service member to run on another instance.
Syntax and Options Use the srvctl relocate service command with the
following syntax:
srvctl relocate service -d db_unique_name -s service_name -i old_inst_name -t new_
inst_name [-f]
Table E–40 srvctl relocate service Options
Option Description
Unique name for the database.
-d db_unique_name
Service name.
-s service_name
Old instance name.
-i old_inst_name
New instance name.
-t new_inst_name
Disconnect all sessions during stop or relocate service
-f
operations.
Example To temporarily relocate a named service member from crm1 to crm3:
srvctl relocate service -d crm -s crm -i crm1 -t crm3
srvctl status
Displays the current state of a named database, instances, services, or node
applications.
Table E–41 srvctl status Summary
Command Description
srvctl status database on page E-25 Obtains the status of a database.
srvctl status instance on page E-26 Obtains the status of a instance.
srvctl status service on page E-26 Obtains the status of services.
srvctl status nodeapps on page E-27 Obtains the status of node applications.
srvctl status asm on page E-27 Obtains the status of ASM instances.
srvctl status database
Obtains the status of instances and their services.
Syntax and Options Use the srvctl status database command with the following
syntax:
srvctl status database -d db_unique_name [-f] [-v]
Table E–42 srvctl status database Options
Option Description
Unique name for the database
-d db_unique_name
Include disabled applications
-f
Server Control Utility Reference E-25

4. SRVCTL Commands
Table E–42 (Cont.) srvctl status database Options
Option Description
Verbose output
-v
Example An example of this command is:
srvctl status database -d crm -v
srvctl status instance
Obtains the status of instances.
Syntax and Options Use the srvctl status instance command with the following
syntax:
srvctl status instance -d db_unique_name -i inst_name_list [-f] [-v]
Table E–43 srvctl status instance Options
Option Description
Unique name for the database
-d db_unique_name
Comma-delimited list of instance names
-i inst_name_list
Include disabled applications
-f
Verbose output
-v
Example An example of this command is:
srvctl status instance -d crm -i quot;crm1,crm2quot; -v
srvctl status service
Obtains the status of a service.
Syntax and Options Use the srvctl status service command with the following
syntax:
srvctl status service -d db_unique_name -s service_name_list [-f] [-v]
Table E–44 srvctl status service Options
Option Description
Unique name for the database
-d db_unique_name
Comma-delimited list of service names
-s service_name_list
Include disabled applications
-f
Verbose output
-v
Example The following example obtains the status of a named service globally across
the database:
srvctl status service -d crm -s crm -v
E-26 Oracle Clusterware and RAC Administration and Deployment Guide

5. SRVCTL Commands
srvctl status nodeapps
Obtains the status of node applications on a particular node.
Syntax and Options Use the srvctl status nodeapps command with the following
syntax:
srvctl status nodeapps -n node_name
The only option available for this command is -n to specify the node name.
Example An example of this command to obtain the status of all nodes supporting
database applications is:
srvctl status nodeapps -n mynode1
srvctl status asm
Obtains the status of an ASM instance.
Syntax and Options Use the srvctl status asm command with the following syntax:
srvctl status asm -n node_name
The only option available for this command is -n to specify the node name.
Example An example of this command is:
srvctl status asm -n crmnode1
srvctl getenv
Gets and displays values for the environment from the configuration file. Use SRVCTL
with the set, get, and unset environment configuration verbs to administer the
environment configurations for databases, instances, services, and node applications.
Table E–45 srvctl getenv Summary
Command Description
srvctl getenv database on page E-27 Gets the cluster database environment values.
srvctl getenv instance on page E-28 Gets the instance environment values.
srvctl getenv service on page E-28 Gets the service environment values.
srvctl getenv nodeapps on page E-29 Gets the node application environment values.
srvctl getenv database
Displays the cluster database environment values.
Syntax and Options Use the srvctl getenv database command with the following
syntax:
srvctl getenv database -d db_unique_name [-t name_list]
Server Control Utility Reference E-27

6. SRVCTL Commands
Table E–46 srvctl getenv database Options
Options Description
Unique name for the database
-d db_unique_name
Names of environment variables
-t name_list
Example The following example gets the environment configuration for a cluster
database:
srvctl getenv database -d crm
srvctl getenv instance
Gets the values for an instance environment configuration.
Syntax and Options Use the srvctl getenv instance command with the following
syntax:
srvctl getenv instance -d db_unique_name -i inst_name [-t name_list]
Table E–47 srvctl getenv database Options
Options Description
Unique name for the database
-d db_unique_name
Instance name
-i inst_name
Names of environment variables
-t name_list
Example The following example sets the environment configuration for an instance:
srvctl getenv instance -d -crm -i instance1
srvctl getenv service
Gets the values for a service environment configuration.
Syntax and Options Use the srvctl getenv service command with the following
syntax:
srvctl getenv service -d db_unique_name -s service_name [-t name_list]
Table E–48 srvctl getenv service Options
Options Description
Unique name for the database
-d db_unique_name
Service name
-s service_name
Names of environment variables
-t name_list
Example The following example lists all environment variables for a service:
srvctl getenv service -d crm -s crm
E-28 Oracle Clusterware and RAC Administration and Deployment Guide

7. SRVCTL Commands
srvctl getenv nodeapps
Gets the environment variables for the node application configurations.
Syntax and Options Use the srvctl getenv nodeapps command with the following
syntax:
srvctl getenv nodeapps -n node_name [-t name_list]
Table E–49 srvctl getenv nodeapps Options
Options Description
Node name
-n node_name
Names of environment variables
-t name_list
Example The following example lists all environment variables for the node
applications:
srvctl getenv nodeapps -n crmnode1
srvctl setenv and unsetenv
The setenv command sets values for the environment in the configuration file. The
unsetenv command unsets values for the environment in the configuration file.
Table E–50 srvctl setenv and unsetenv Summary
Command Description
srvctl setenv database on page E-29 Administers cluster database environment configurations
srvctl setenv instance on page E-30 Administers instance environment configurations
srvctl setenv service on page E-30 Administers service environment configurations
srvctl setenv nodeapps on page E-31 Administers node application environment configurations
srvctl unsetenv database on page E-31 Unsets the cluster database environment configuration
srvctl unsetenv instance on page E-31 Unsets instance environment configurations
srvctl unsetenv service on page E-32 Unsets service environment configurations
srvctl unsetenv nodeapps on page E-32 Unsets node application environment configurations
srvctl setenv database
Administers cluster database environment configurations.
Syntax and Options Use the srvctl setenv database command with the following
syntax:
srvctl setenv database -d db_unique_name {-t name=val[,name=val,...] | -T
name=val}
Table E–51 srvctl setenv database Options
Options Description
Unique name for the database.
-d db_unique_name
Names and values of environment variables.
-t =,...nameval
Server Control Utility Reference E-29

8. SRVCTL Commands
Table E–51 (Cont.) srvctl setenv database Options
Options Description
Enables single environment variable to be set to a value that contains
-T name=val
commas or other special characters.
Example The following example sets the language environment configuration for a
cluster database:
srvctl setenv database -d crm -t LANG=en
srvctl setenv instance
Administers instance environment configurations.
Syntax and Options Use the srvctl setenv instance with the following syntax:
srvctl setenv instance -d db_unique_name [-i inst_name] {-t
name=val[,name=val,...] | -T name=val}
Table E–52 srvctl setenv instance Options
Options Description
Unique name for the database.
-d db_unique_name
Instance name.
-i inst_name
Names and values of environment variables.
-t =,...nameval
Enables single environment variable to be set to a value that contains
-T name=val
commas or other special characters.
Example The following example sets the environment configuration for an instance:
srvctl setenv instance -d -crm -i instance1 -t LANG=EN
srvctl setenv service
Administers service environment configurations.
Syntax and Options Use the srvctl setenv service command with the following
syntax:
srvctl setenv service -d db_unique_name [-s service_name] {-t
name=val[,name=val,...] | -T name=val}
Table E–53 srvctl setenv service Options
Options Description
Unique name for the database.
-d db_unique_name
Service name.
-s service_name
Names and values of environment variables.
-t =,...nameval
Enables single environment variable to be set to a value that contains
-T name=val
commas or other special characters.
E-30 Oracle Clusterware and RAC Administration and Deployment Guide

9. SRVCTL Commands
Example To set all environment variables for a service:
srvctl setenv service -d crm -s crm -t CLASSPATH=/usr/local/jdk/jre/rt.jar
srvctl setenv nodeapps
Sets the environment variables for the node application configurations.
Syntax and Options Use the srvctl setenv nodeapps command as follows:
srvctl setenv nodeapps -n node_name {-t name=val[,name=value,...] | -T name=value}
Table E–54 srvctl setenv nodeapps Options
Options Description
Node name.
-n node_name
Names and values of environment variables.
-t =,...nameval
Enables single environment variable to be set to a value that contains
-T name=val
commas or other special characters.
Example To set an environment variable for a node application:
srvctl setenv nodeapps -n crmnode1 -t CLASSPATH=/usr/local/jdk/jre/rt.jar
srvctl unsetenv database
Unsets the cluster database environment configurations.
Syntax and Options Use the srvctl unsetenv database command as follows:
srvctl unsetenv database -d db_unique_name -t name_list
Table E–55 srvctl unsetenv database Options
Options Description
Unique name for the database.
-d db_unique_name
Names of environment variables.
-t name_list
Example The following example unsets the environment configuration for a cluster
database environment variable:
srvctl unsetenv database -d crm -t CLASSPATH
srvctl unsetenv instance
Unsets instance environment configurations.
Syntax and Options Use the srvctl unsetenv instance command as follows:
srvctl unsetenv instance -d db_unique_name [-i inst_name] -t name_list
Server Control Utility Reference E-31

10. SRVCTL Commands
Table E–56 srvctl unsetenv instance Options
Options Description
Unique name for the database.
-d db_unique_name
Instance name.
-i instance_name
Names of environment variables.
-t name_list
Example The following example unsets the environment configuration for an instance:
srvctl unsetenv instance -d -crm -i instance1 -t CLASSPATH
srvctl unsetenv service
Unsets service environment configurations.
Syntax and Options Use the srvctl unsetenv service command as follows:
srvctl unsetenv service -d db_unique_name [-s service_name] -t name_list
Table E–57 srvctl unsetenv service Options
Options Description
Unique name for the database.
-d db_unique_name
Service name.
-s service_name
Names of environment variables.
-t name_list
Example To unset an environment variables for a service:
srvctl unsetenv service -d crm -s crm -t CLASSPATH
srvctl unsetenv nodeapps
Unsets the environment configuration for the node application configurations.
Syntax and Options Use the srvctl unsetenv nodeapps command as follows:
srvctl unsetenv nodeapps -n node_name -t name_list
Table E–58 srvctl unsetenv nodeapps Options
Options Description
Node name.
-n node_name
Names and values of environment variables.
-t name=val
Example The following example unsets the environment configuration for a node's
node applications:
srvctl unsetenv nodeapps -n crmnode1 -t name_list
E-32 Oracle Clusterware and RAC Administration and Deployment Guide

11. SRVCTL Commands
srvctl remove
Removes the configuration, the Oracle Clusterware applications for the node
(including the virtual IP address, the Oracle Enterprise Manager agent, the GSD, and
the Listeners), the database, named instances, or the named services from the cluster
database. Environment settings for the object are also removed.
If you do not use the force flag (-f), then Oracle prompts you to confirm whether to
proceed. If you use the force (-f) option, then the remove operation proceeds without
prompting and continues processing even when it encounters errors. Even when the
Oracle Clusterware resources cannot be removed, the OCR configuration is removed,
so that the object now appears not to exist, but there are still Oracle Clusterware
resources. Use the -f option with extreme caution because this could result in an
inconsistent OCR.
To use the remove verb, you must first stop the node applications, database, instance,
or service for which you are specifying srvctl remove. Oracle recommends that you
perform a disable operation before using this command, but this is not required. You
must stop the target object before running the srvctl remove command. The srvctl
stop command is described on page E-17.
Table E–59 srvctl remove Summary
Command Description
srvctl remove database on page E-33 Removes a database and configuration.
srvctl remove instance on page E-33 Removes one or more instances and configurations.
srvctl remove service on page E-34 Removes services.
srvctl remove nodeapps on page E-34 Removes node applications.
srvctl remove asm on page E-35 Removes ASM instances
srvctl remove database
Removes a database configuration.
Syntax and Options Use the srvctl remove database command with the following
syntax:
srvctl remove database -d db_unique_name [-f]
Table E–60 srvctl remove database Options
Options Description
Unique name for the database.
-d db_unique_name
Force remove.
-f
Example An example of this command is:
srvctl remove database -d crm
srvctl remove instance
Removes the configurations for an instance.
Syntax and Options Use the srvctl remove instance command with the following
syntax:
Server Control Utility Reference E-33

12. SRVCTL Commands
srvctl remove instance -d db_unique_name -i inst_name [-f]
Table E–61 srvctl remove instance Options
Options Description
Unique name for the database.
-d db_unique_name
Instance name.
-i inst_name
Force remove.
-f
Example An example of this command is:
srvctl remove instance -d crm -i crm01
srvctl remove service
Removes the configuration for a service.
Syntax and Options Use the srvctl remove service command as follows:
srvctl remove service -d db_unique_name -s service_name [-i inst_name] [-f]
Table E–62 srvctl remove service Options
Options Description
Unique name for the database.
-d db_unique_name
Service name.
-s service_name
Instance name.
-i inst_name
Force remove.
-f
Examples An example of this command is:
srvctl remove service -d crm -s sales
The following example removes the services from specific instances:
srvctl remove service -d crm -s sales -i crm01,crm02
srvctl remove nodeapps
Removes the node application configuration from the specified node. You must have
full administrative privileges to run this command. On UNIX-based systems, you
must be logged in as root and on Windows-based systems, you must be logged in as
a user with Administrator privileges.
Syntax Use the srvctl remove nodeapps command as follows:
srvctl remove nodeapps -n node_name_list [-f]
Table E–63 srvctl remove nodeapps Options
Options Description
Node name or a comma-delimited list of node names.
-n node_name_list
E-34 Oracle Clusterware and RAC Administration and Deployment Guide

13. SRVCTL Commands
Table E–63 (Cont.) srvctl remove nodeapps Options
Options Description
Force remove.
-f
Example An example of this command is:
srvctl remove nodeapps -n quot;mynode1,mynode2,mynode3quot;
srvctl remove asm
Removes an ASM instance.
Syntax and Options Use the srvctl remove asm command with the following syntax:
srvctl remove asm -n node_name [-i asm_inst_name]
Table E–64 srvctl remove asm Option
Option Description
Node name
-n node_name
ASM instance name.
-i asm_inst_name
Example An example of this command is:
srvctl remove asm -n crmnode1 -i asm1
Server Control Utility Reference E-35

14. SRVCTL Commands
E-36 Oracle Clusterware and RAC Administration and Deployment Guide

15. F
Oracle Real Application Clusters Tools
Messages
This appendix describes the Oracle Real Application Clusters (RAC) management
tools messages. The messages in this appendix appear alphabetically by group. The
topics in this appendix are:
Overview of Real Application Clusters-Specific Messages
■
PRKA—Cluster Node Applications Messages
■
PRKC—Cluster Command Messages
■
PRKD—Global Services Daemon Messages
■
PRKE—Global Services Daemon Controller Utility Messages
■
PRKH—Server Manager (SRVM) Messages
■
PRKI—Cluster Pre-Install Messages
■
PRKN—Server Manager (SRVM) System Library Messages
■
PRKO—Server Control (SRVCTL) Utility Messages
■
PRKP—Cluster Database Management Messages
■
PRKR—Cluster Registry Messages
■
PRKS—Automatic Storage Management Messages
■
PRKU—Command-Line Parser Utility Messages
■
PRKV—Virtual IP Configuration Assistant Messages
■
See Also: Oracle Database Platform Guide for Microsoft Windows
(32-Bit) for Windows-based messages and for all other messages
refer search online at
http://tahiti.oracle.com
Overview of Real Application Clusters-Specific Messages
Within Oracle Database 10g, RAC messages use the same ORA prefix and reside in the
same e*.msg files as non-RAC or single-instance Oracle database messages.
Additionally, some RAC messages are issued by the single-instance Oracle database.
These messages appear online by way of a Tahiti error message search as described in
the Oracle database documentation in the Preface of this book under the heading
quot;Related Documentsquot; on page -xiv.
Oracle Real Application Clusters Tools Messages F-1

16. PRKA—Cluster Node Applications Messages
Prefixes and Message Codes for RAC-Specific Messages
Message prefixes indicate where to find information about the messages in this
chapter. In addition, the prefixes indicate which RAC component issued the messages.
Types of Real Application Clusters Messages and Related Files
The RAC high availability and cluster database management tools use the following
syntax for internal messages:
PRKx-0000: Cause description quot;variablequot; text {variable} text {variable}
A message might appear as follows:
PRKC-1022 quot;Could not get quot;node namequot; for node {0} in {1}quot;
The variables in the previous example represent numbers, names, and character
strings for objects in the physical or logical cluster and the cluster database. you can
ignore empty variables.
PRKA—Cluster Node Applications Messages
PRKA-2001: GSD already exists
Cause: An attempt was made to create the Global Services Daemon (GSD)
application while there is a running GSD application.
Action: Stop and remove the running GSD and create the GSD application again
using the 'srvctl add nodeapps' command.
PRKA-2002: Listener already exists
Cause: An attempt was made to create a Listener application while there is a
running Listener application.
Action: Stop and remove the running Listener and create the Listener application
again using the 'srvctl add nodeapps' command.
PRKA-2003: EM Agent already exists
Cause: An attempt was made to create an Agent application while there is a
running Agent application.
Action: Stop and remove the running Agent and create the Agent application
again using the 'srvctl add nodeapps' command.
PRKA-2004: No database found for the cluster.
Cause:
Action:
PRKA-2005: Netmasks are different for starting and ending IP addresses
Cause: Invalid range of VIP addresses specified for the cluster.
Action: Check if the starting and ending addresses in the VIP range belong to the
same netmask.
PRKA-2006: Invalid VIP address range
Cause: Invalid range of VIP addresses specified for the cluster.
Action: Check if the starting address is less than ending address.
PRKA-2007: Empty VIP address range
Cause: Invalid range of VIP addresses specified for the cluster.
F-2 Oracle Clusterware and RAC Administration and Deployment Guide

17. PRKA—Cluster Node Applications Messages
Action: Enter valid non-null VIP address range.
PRKA-2008: No VIP address is available in the VIP pool
Cause: No IP addresses are available for use in the range of IP addresses that you
specified earlier.
Action: Check the VIP address pool to ensure that you are using valid VIP
addresses.
PRKA-2009: VIP address is not found
Cause: IP address is not found.
Action: Enter valid VIP address.
PRKA-2010: VIP address already exists
Cause: An attempt was made to create a Virtual IP while there is a running
Virtual IP application.
Action: Stop and remove the running Virtual IP application and create the Virtual
IP application using the 'srvctl add nodeapps' command.
PRKA-2011: Remote command failed - not used?
Cause: The command failed to execute on remote node.
Action: Check the command for syntax and semantics and reissue the command.
PRKA-2012: Failed to get the VIP address range configuration from the OCR
Cause: There might not be any IP address ranges in the OCR or it is possible that
an OCR error occurred while retrieving the VIP address range.
Action: Refer to the OCR logs for detailed error information.
PRKA-2013: Failed to add the VIP address range configuration to the OCR
Cause: An OCR error occurred while adding the VIP address range into the OCR.
Action: Refer to the OCR logs for detailed error information.
PRKA-2014: Failed to remove the VIP address range configuration from the OCR
Cause: An OCR error occurred while adding the VIP address range into the OCR.
Action: Refer to the OCR logs for detailed error information.
PRKA-2015: Invalid node name
Cause: The node name that you entered does not belong to the cluster.
Action: Enter a node that belongs to the cluster.
PRKA-2016: Invalid listener name
Cause: The listener name entered is invalid.
Action: Correct the listener name.
PRKA-2017: There are no IP addresses in the specified range. Make sure to specify
the correct range for the IP addresses.
Cause:
Action: Specify valid range for IP addresses.
PRKA-2018: Virtual IP can only be created or removed by the system privilege user.
Cause: Only users with administrative privileges can configure Virtual IPs on the
system.
Oracle Real Application Clusters Tools Messages F-3

18. PRKC—Cluster Command Messages
Action: Verify the privileges of the user who is attempting to create or remove the
VIP address.
PRKA-2019: Error executing command quot;{0}quot;. File is missing.
Cause:
Action:
PRKC—Cluster Command Messages
PRKC-1023: Invalid IP address format: {0}
Cause: The given IP address does not adhere to the IP address format standard.
Action: Use the correct IP address format.
PRKC-1024: Invalid netmask: {0}
Cause: The given netmask format does not adhere to the format standard.
Action: Change the netmask format to a valid netmask format.
PRKC-1025: Failed to create a file in directory {0}
Cause: Might be due to insufficient permission or due to insufficient disk space.
Action: Check the permission on the directory and available space.
PRKC-1026: Failed doing I/O to file {0}
Cause: Might be due to insufficient permission or due to insufficient disk space or
network issue.
Action: Check the permission on the directory and available space. Make sure the
storage medium is accessible.
PRKC-1027: Error checking existence of file {0} on {1}
Cause: Might be due to an improper user equivalence configuration or due to
insufficient permissions on the parent directory.
Action: Verify that user equivalence is correctly configured and that the directory
has read and execute permissions.
PRKC-1028: Error checking write permission for directory {0} on {1}
Cause: Might be due to an improper user equivalence configuration or due to
insufficient permissions on the parent directory.
Action: Verify that user equivalence is correctly configured and that the directory
has read and execute permissions.
PRKC-1029: Failed to get modification time for file {0} on node {1}, [2]
Cause: Might be due to an improper user equivalence configuration or due to
insufficient permissions on the parent directory.
Action: Verify that user equivalence is correctly configured and that the directory
has read and execute permissions.
PRKC-1030: Error checking accessibility for node {0}, {1}
Cause: Might be due to a network issue or to an improper user equivalence
setup.
Action: Check node reachability between the local and the remote nodes and
make sure user equivalence is correctly configured.
PRKC-1031: Error checking free space for {0} on {1}
F-4 Oracle Clusterware and RAC Administration and Deployment Guide

19. PRKC—Cluster Command Messages
Cause: Might be due to a network issue or to an improper user equivalence setup.
Action: Check node reachability between the local and the remote nodes and
make sure that user equivalence is correctly configured.
PRKC-1032: Directory {0} does not exist
Cause: The specified directory does not exist.
Action: Make sure that the specified directory exists. Use an absolute path for the
directory.
PRKC-1033: Executable {0} does not exist
Cause: The specified executable does not exist.
Action: Verify the existence of the executable before retrying.
PRKC-1034: No local node name found for host {0}
Cause: The local node may not be part of the cluster or an error may have
occurred while retrieving the local node name.
Action: Check CRS logs in ORA_CRS_HOME/log/<hostname> and OCR logs in
ORA_CRS_HOME/srvm/log.
PRKC-1035: Node names for this cluster could not be retrieved
Cause: An error occurred while retrieving node names from the cluster.
Action: Check CRS logs in ORA_CRS_HOME/log/<hostname> and OCR logs in
ORA_CRS_HOME/srvm/log.
PRKC-1036: CRS_HOME name passed to the method was null
Cause: The CRS home name cannot be null.
Action: Pass non-null CRS_HOME to the method.
PRKC-1037: Error removing files listed in {0} from node {1}
Cause: Might be due to an improper user equivalence configuration or due to
insufficient permissions.
Action: Verify that user equivalence is correctly configured and that the
mentioned files have the correct permissions.
PRKC-1038: Error copying files listed in {0} to node {1}
Cause: Might be due to an improper user equivalence configuration or due to
insufficient permissions.
Action: Verify that user equivalence is correctly configured and that the
mentioned files have the correct permissions.
PRKC-1039: Error creating directories listed in {0} on node {1}
Cause: Might be due to an improper user equivalence configuration or due to
insufficient permissions.
Action: Verify that user equivalence is correctly configured and that the
mentioned files have the correct permissions.
PRKC-1040: Remote Shell is not known yet.
Cause: User equivalence is not yet configured.
Action: Configure user equivalence.
PRKC-1041: Remote Copy command is not known yet.
Cause: User equivalence is not yet configured.
Oracle Real Application Clusters Tools Messages F-5

20. PRKC—Cluster Command Messages
Action: Configure user equivalence.
PRKC-1042: The Remote Shell {0} requested by client is not recognized
Cause: The system does not recognize the given remote shell command.
Action: Use ssh or rsh as the remote shell.
PRKC-1043: The Remote Copy command {0} requested by client is not recognized
Cause: The system does not recognize the given remote copy command.
Action: Use scp or rcp for remote copy.
PRKC-1044: Failed to check remote command execution setup for node {0} using
shells {1} and {2}
Cause: Could not find the remote shell commands {1} and {2} on node {0}.
Action: Configure user equivalence. Use environment variables to pass remote
shell commands.
PRKC-1045: Node name is null
Cause: Node name received is null.
Action: Pass non-null node name to method/command.
PRKC-1046: The file list passed to the method was null
Cause: The list of files obtained is null.
Action: Pass non-null file list to method.
PRKC-1047: The directory list passed to the method was null
Cause: The list of directories obtained is null.
Action: Pass non-null directory list to method.
PRKC-1048: {0} is not supported on Windows platform
Cause: Unsupported operation.
Action: Do not attempt {0} on Windows.
PRKC-1049: CRS is not supported in version {0}. It is supported from version {1}
onwards
Cause: Unsupported operation.
Action: Upgrade to version {1} before attempting CRS commands.
PRKC-1050: EVM is not supported in version {0}. It is supported from version {1}
onwards
Cause: Unsupported operation.
Action: Upgrade to version {1} before attempting to use EVM.
PRKC-1051: Invalid data to set for registry key {0}.
Cause: Data validation failed for registry operation.
Action: Check data passed as value for registry key {0}.
PRKC-1052: Invalid data type for registry key {0}.
Cause: Data validation failed for registry key {0}.
Action: Check data type of value for registry key {0}.
PRKC-1053: Error returned from node {0} is quot;{1}quot;
Cause:
F-6 Oracle Clusterware and RAC Administration and Deployment Guide