Ground Operations:Taxiing

17,214 views

Published on

Ground Operations: Preflight Planning for X-Plane flight simulator. Taxiing.

Published in: Entertainment & Humor
0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total views
17,214
On SlideShare
0
From Embeds
0
Number of Embeds
15,037
Actions
Shares
0
Downloads
0
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

Ground Operations:Taxiing

  1. 1. Ground Operations: Taxiing Step 1: Close Checklister Plugin
  2. 2. Ground Operations: Taxiing Step 2: Open Airport Navigator Plugin SELECT: View the map.
  3. 3. Ground Operations: Taxiing Step 2: Open Airport Navigator Plugin ZOOM IN: Press [crtl][shift][page up] on keyboard. ZOOM OUT: Press [crtl][shift][page down] on keyboard.
  4. 4. Ground Operations: Taxiing Step 3: Test Brakes TEST: Release parking brake, increase throttle to 1200 RPM and test brakes. Adjust throttle to obtain normal taxi speed. Maximum taxi speed is 20 knots.
  5. 5. Ground Operations: Taxiing Step 4: Exit General Aviation Ramp LEFT: Turn left and center the airplane over the yellow taxiway centerline. Airport Navigator's red triangle shows your aircraft position and orientation.
  6. 6. Ground Operations: Taxiing Step 5: Taxiway November LEFT: Turn left onto taxiway November
  7. 7. Ground Operations: Taxiing Step 6: Taxiway Papa LEFT: Turn left onto taxiway Papa.
  8. 8. Ground Operations: Taxiing Step 7: Taxiway Delta RIGHT: Turn right onto taxiway Delta.
  9. 9. Ground Operations: Taxiing Step 8: Taxiway Alfa RIGHT: Turn right onto taxiway Alfa.
  10. 10. Ground Operations: Taxiing Step 9: Taxiway Bravo RIGHT: Turn right onto taxiway Bravo.
  11. 11. Ground Operations: Taxiing Step 10: Locate Run-Up area. PREPARE: Locate a suitable area to perform your Before Takeoff checklist. Typically there is an area short of the runway entrance clear of traffic.
  12. 12. Ground Operations: Taxiing Step 11: Stop STOP: Stop in the area to perform your Before Takeoff checklist. Set throttle to idle.

×