This document provides instructions for removing and installing a transmission on a 930K wheel loader. It outlines:
1) Required tools including hydraulic jacks, link brackets, and lever pullers.
2) Detailed step-by-step procedures for removing components like hoses, harnesses, brackets and bolts to separate the transmission from the loader.
3) Instructions for using lifting devices and jacks to safely position and lower the transmission.
4) Similar steps for disassembling the transmission including removing valves, fittings, seals, bearings and shafts.
5 Warning Signs Your BMW's Intelligent Battery Sensor Needs AttentionBertini's German Motors
IBS monitors and manages your BMW’s battery performance. If it malfunctions, you will have to deal with an array of electrical issues in your vehicle. Recognize warning signs like dimming headlights, frequent battery replacements, and electrical malfunctions to address potential IBS issues promptly.
What Could Cause The Headlights On Your Porsche 911 To Stop WorkingLancer Service
Discover why your Porsche 911 headlights might flicker out unexpectedly. From aging bulbs to electrical gremlins and moisture mishaps, we're delving into the reasons behind the blackout. Stay tuned to illuminate the road ahead and ensure your lights shine bright for safer journeys.
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
In this presentation, we have discussed a very important feature of BMW X5 cars… the Comfort Access. Things that can significantly limit its functionality. And things that you can try to restore the functionality of such a convenient feature of your vehicle.
What Are The Immediate Steps To Take When The VW Temperature Light Starts Fla...Import Motorworks
Learn how to respond when the red temperature light flashes in your VW with this presentation. From checking coolant levels to seeking professional help, follow these steps promptly to prevent engine damage and ensure safety on the road.
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
𝘼𝙣𝙩𝙞𝙦𝙪𝙚 𝙋𝙡𝙖𝙨𝙩𝙞𝙘 𝙏𝙧𝙖𝙙𝙚𝙧𝙨 𝙞𝙨 𝙫𝙚𝙧𝙮 𝙛𝙖𝙢𝙤𝙪𝙨 𝙛𝙤𝙧 𝙢𝙖𝙣𝙪𝙛𝙖𝙘𝙩𝙪𝙧𝙞𝙣𝙜 𝙩𝙝𝙚𝙞𝙧 𝙥𝙧𝙤𝙙𝙪𝙘𝙩𝙨. 𝙒𝙚 𝙝𝙖𝙫𝙚 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙥𝙡𝙖𝙨𝙩𝙞𝙘 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙪𝙨𝙚𝙙 𝙞𝙣 𝙖𝙪𝙩𝙤𝙢𝙤𝙩𝙞𝙫𝙚 𝙖𝙣𝙙 𝙖𝙪𝙩𝙤 𝙥𝙖𝙧𝙩𝙨 𝙖𝙣𝙙 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙛𝙖𝙢𝙤𝙪𝙨 𝙘𝙤𝙢𝙥𝙖𝙣𝙞𝙚𝙨 𝙗𝙪𝙮 𝙩𝙝𝙚 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙛𝙧𝙤𝙢 𝙪𝙨.
Over the 10 years, we have gained a strong foothold in the market due to our range's high quality, competitive prices, and time-lined delivery schedules.
"Trans Failsafe Prog" on your BMW X5 indicates potential transmission issues requiring immediate action. This safety feature activates in response to abnormalities like low fluid levels, leaks, faulty sensors, electrical or mechanical failures, and overheating.
What Does the PARKTRONIC Inoperative, See Owner's Manual Message Mean for You...Autohaus Service and Sales
Learn what "PARKTRONIC Inoperative, See Owner's Manual" means for your Mercedes-Benz. This message indicates a malfunction in the parking assistance system, potentially due to sensor issues or electrical faults. Prompt attention is crucial to ensure safety and functionality. Follow steps outlined for diagnosis and repair in the owner's manual.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Symptoms like intermittent starting and key recognition errors signal potential problems with your Mercedes’ EIS. Use diagnostic steps like error code checks and spare key tests. Professional diagnosis and solutions like EIS replacement ensure safe driving. Consult a qualified technician for accurate diagnosis and repair.
Why Is Your BMW X3 Hood Not Responding To Release CommandsDart Auto
Experiencing difficulty opening your BMW X3's hood? This guide explores potential issues like mechanical obstruction, hood release mechanism failure, electrical problems, and emergency release malfunctions. Troubleshooting tips include basic checks, clearing obstructions, applying pressure, and using the emergency release.
2. Shutdown SIS
Previous Screen
Product: WHEEL LOADER
Model: 930K WHEEL LOADER RHN
Configuration: 930K Wheel Loader RHN00001-UP (MACHINE) POWERED BY C6.6 Engine
Disassembly and Assembly
924K, 930K and 938K Wheel Loaders Power Train
Media Number -UENR0281-03 Publication Date -01/04/2017 Date Updated -24/04/2017
i05142776
Transmission
SMCS - 3030
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1U-7505 Hydraulic Jack 1
B
138-7575 Link Bracket 3
1U-9200 Lever Puller Hoist Gp 1
Start By:
A. Remove the front hydrostatic piston motor and the rear hydrostatic piston motor.
1/76
930K Wheel Loader RHN00001-UP (MACHINE) POWERED BY C6.6 Engine(SEBP...
2020/4/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Illustration 1 g02802456
1. Remove bolts (1) and the caps in order to disconnect drive shaft (2) from the yoke. Discard
bolts (1) .
Illustration 2 g02802476
2. Remove cover (3) .
Illustration 3 g02802517
3. Disconnect harness assemblies (4) and (5) . Reposition harness assemblies (4) and (5) out of
the way.
2/76
930K Wheel Loader RHN00001-UP (MACHINE) POWERED BY C6.6 Engine(SEBP...
2020/4/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Illustration 4 g02802564
4. Disconnect harness assembly (6) and reposition harness assembly (6) out of the way.
Illustration 5 g02802576
5. Remove bracket (7) .
Illustration 6 g02802636
3/76
930K Wheel Loader RHN00001-UP (MACHINE) POWERED BY C6.6 Engine(SEBP...
2020/4/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. 6. Disconnect harness assembly (8) . Disconnect tube assembly (9) . Reposition filter base (10)
out of the way.
Illustration 7 g02802997
7. Disconnect harness assembly (11) .
Illustration 8 g02803036
8. Disconnect hose assembly (12) .
4/76
930K Wheel Loader RHN00001-UP (MACHINE) POWERED BY C6.6 Engine(SEBP...
2020/4/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Illustration 9 g02803097
9. Remove clamp (13) and bolts (15) . Reposition tube assembly (14) and hose assembly (16)
out of the way.
Illustration 10 g02803276
10. Position Tooling (A) under transmission (17) . The weight of transmission (17) is
approximately 145 kg (320 lb). Use suitable straps in order to secure transmission (17) to
Tooling (A) .
5/76
930K Wheel Loader RHN00001-UP (MACHINE) POWERED BY C6.6 Engine(SEBP...
2020/4/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 14 g02803577
14. Use Tooling (A) in order to lower transmission (17) .
Illustration 15 g02803580
7/76
930K Wheel Loader RHN00001-UP (MACHINE) POWERED BY C6.6 Engine(SEBP...
2020/4/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. Illustration 16 g02803606
Illustration 17 g02803617
15. Position a suitable bar across transmission mounts (21) . Attach Tooling (B) to the suitable
bar and transmission (17) . The weight of transmission (17) is approximately 145 kg (320
lb).
16. Disconnect the straps that secure transmission (17) to Tooling (A) . Use Tooling (B) in
order to raise transmission (17) off Tooling (A) . Remove Tooling (A) .
17. Use Tooling (A) in order to lower transmission (17) to the ground.
Installation Procedure
1. Install transmission (17) in the reverse order of removal.
8/76
930K Wheel Loader RHN00001-UP (MACHINE) POWERED BY C6.6 Engine(SEBP...
2020/4/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Illustration 18 g02802456
a. Install new bolts (1) and tighten until snug. Tighten bolts (1) to a torque of 71 ± 10
N·m (52 ± 7 lb ft) using an X pattern.
Disassembly Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A
1U-9200 Lever Puller Hoist Gp 1
138-7575 Link Bracket 3
B 308-3470 Jack Stand 3
C 138-7576 Link Bracket 2
D
6V-3009 Crossbar 1
6V-4832 Forcing Screw 1
8H-0663 Bearing Puller Gp 1
126-7181 Sliding Plate 4
126-7177 Puller Leg 2
1P-0510 Driver Gp 1
E 1P-0520 Driver Gp 1
F 4C-3652 Compressor Assembly 1
Start By:
A. Remove the transmission.
9/76
930K Wheel Loader RHN00001-UP (MACHINE) POWERED BY C6.6 Engine(SEBP...
2020/4/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Illustration 24 g02798437
6. Remove O-ring seals (8) from valve (7) .
Illustration 25 g02798442
7. Remove temperature sensor (9) from valve assembly (2) .
Illustration 26 g02798445
8. Remove O-ring seal (10) from temperature sensor (9) .
12/76
930K Wheel Loader RHN00001-UP (MACHINE) POWERED BY C6.6 Engine(SE...
2020/4/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Illustration 27 g02798448
9. Remove relief valve (11) from valve assembly (2) .
Illustration 28 g02798449
10. Remove backup rings (12) and O-ring seal (14) from relief valve (11) . Remove backup
rings (13) and O-ring seal (15) . Remove O-ring seal (16) .
Illustration 29 g02798452
13/76
930K Wheel Loader RHN00001-UP (MACHINE) POWERED BY C6.6 Engine(SE...
2020/4/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. 11. Remove fitting (17) and the O-ring seal from valve assembly (2) . Remove the caps, fittings
(18) , and the O-ring seals. Remove the cap, fitting (19) , and the O-ring seal.
Illustration 30 g02798457
12. Remove bolt (20) and yoke (21) .
Illustration 31 g02798458
13. Remove spacer (22) .
14/76
930K Wheel Loader RHN00001-UP (MACHINE) POWERED BY C6.6 Engine(SE...
2020/4/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Illustration 32 g02798461
14. Remove O-ring seal (23) from yoke (21) .
Illustration 33 g02798465
15. Attach Tooling (A) and a suitable lifting device to transmission (24) . The weight of
transmission (24) is approximately 122 kg (270 lb). Use Tooling (A) and the suitable lifting
device in order to position transmission (24) onto Tooling (B) as shown on Illustration 33.
Illustration 34 g02798473
15/76
930K Wheel Loader RHN00001-UP (MACHINE) POWERED BY C6.6 Engine(SE...
2020/4/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. 16. Remove bolt (25) and remove yoke (26) . Remove bolts (27) .
Illustration 35 g02798479
17. Remove O-ring seal (28) from yoke (26) .
Illustration 36 g02798481
18. Attach Tooling (C) and a suitable lifting device to housing (29) . The weight of housing (29)
is approximately 45 kg (100 lb). Use Tooling (C) and the suitable lifting device in order to
remove housing (29) .
16/76
930K Wheel Loader RHN00001-UP (MACHINE) POWERED BY C6.6 Engine(SE...
2020/4/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Illustration 50 g02798511
32. Remove bolt (45) . Remove sensor (44) and the O-ring seal.
33. Remove bolt (46) . Remove sensor (47) and the O-ring seal.
34. Remove plug (48) and the O-ring seal.
Illustration 51 g02798512
35. Remove shaft assembly (49) .
Illustration 52 g02798514
36. Use Tooling (D) in order to remove bearing cone (50) from shaft assembly (49) .
22/76
930K Wheel Loader RHN00001-UP (MACHINE) POWERED BY C6.6 Engine(SE...
2020/4/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
24. Illustration 53 g02798517
37. Use Tooling (D) in order to remove bearing cone (51) from shaft assembly (49) .
Illustration 54 g02798519
38. Remove bearing cup (52) .
Illustration 55 g02798520
39. Remove shaft assembly (53) .
23/76
930K Wheel Loader RHN00001-UP (MACHINE) POWERED BY C6.6 Engine(SE...
2020/4/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
25. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
26. Illustration 56 g02798521
40. Use Tooling (D) in order to remove bearing cone (54) from shaft assembly (53) .
Illustration 57 g02798522
41. Use Tooling (D) in order to remove bearing cone (55) from shaft assembly (53) .
24/76
930K Wheel Loader RHN00001-UP (MACHINE) POWERED BY C6.6 Engine(SE...
2020/4/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
27. Illustration 58 g02798523
42. Remove bearing cup (56) .
Illustration 59 g02798524
43. Remove bolts (57) and remove plate (58) .
Illustration 60 g02798526
44. Remove bolts (59) from plate (58) . Remove seal assembly (60) .
25/76
930K Wheel Loader RHN00001-UP (MACHINE) POWERED BY C6.6 Engine(SE...
2020/4/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
28. Illustration 61 g02798527
45. Use Tooling (E) and a suitable press in order to remove seal (61) (not shown) from seal
assembly (60) .
Illustration 62 g02798529
46. Remove shaft assembly (62) .
Illustration 63 g02798530
26/76
930K Wheel Loader RHN00001-UP (MACHINE) POWERED BY C6.6 Engine(SE...
2020/4/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...