Toro reelmaster 7000 mower service repair manualfskkkdjskemd
This document provides safety instructions for operating, maintaining, and servicing the Reelmaster 7000. It outlines general safety practices including wearing proper protective equipment and following safety decals/symbols. Specific safety instructions are provided for before operating, while operating, and maintenance/service of the machine. Jacking instructions and locations of safety decals are also included.
Toro pro sweep (model 07066) service repair manualfskkkdjskemd
This document is a service manual for the Pro Sweep model 07066. It provides information for technicians to troubleshoot, test, and repair major systems and components of the Pro Sweep. The manual contains chapters covering safety, product records and maintenance, hydraulic and electrical systems, chassis, and electrical diagrams. Technicians are instructed to follow all safety procedures when servicing equipment to prevent injury.
Toro groundsmaster 4010 d (model 30446) service repair manualfskkkdjskemd
This document is a service manual for the Groundsmaster 4000-D and 4010-D. It contains 10 chapters that cover safety procedures, product records and maintenance, the Kubota diesel engine, hydraulic system, electrical system, axles/brakes, chassis, cutting decks, operator cab, and foldout diagrams. The manual provides service technicians with information for troubleshooting, testing, and repairing major systems and components.
Toro groundsmaster 4000 d (model 30448) service repair manualfskkkdjskemd
This document is a service manual for the Groundsmaster 4000-D and 4010-D. It contains 10 chapters that cover safety procedures, product records and maintenance, the Kubota diesel engine, hydraulic system, electrical system, axles/brakes, chassis, cutting decks, operator cab, and foldout diagrams. The manual provides service technicians with information for troubleshooting, testing, and repairing major systems and components.
Takeuchi tl140 crawler loader parts catalogue manual (sn 21400011 and up)fskkkdjskemd
This document provides a parts list and references for a TL140 excavator with serial number 21400011-. It includes 28 items related to the piping for the operation lever for serial numbers 21400011-21401390. The parts are numbered and include descriptions, quantities, and part numbers. Reference pages are provided at the end of each section.
Takeuchi tl120 crawler loader parts catalogue manual (sn 21200008 and up)fskkkdjskemd
This document provides a parts list for a TL120 excavator. It contains 84 items describing various engine, undercarriage, and structural parts along with their part numbers, descriptions, quantities, and other details. The parts are grouped into sections covering the engine and accessories, undercarriage, frame, hydraulic and electrical systems, covers and attachments. The document includes references to other parts manuals and serves as an index of replaceable components for the excavator.
Takeuchi tb175 compact excavator parts catalogue manual (sn 17510003 and up)fskkkdjskemd
This document provides parts information for a TB175 excavator. It includes exploded diagrams and part lists for the lower frame, crawler belt, carrier rollers, track rollers, front idler, track adjuster, travel device, slew bearing, swivel joint and accessories, and dozer blade. The parts are identified by part number, description, and quantity. Serial numbers are provided for some parts to indicate applicability.
Takeuchi tb125 compact excavator parts catalogue manual (sn 12510009 and up)fskkkdjskemd
The document provides parts information for a TB125 excavator with serial number 12510009-. It includes sections for the lower frame, crawler belt, carrier roller, track roller, front idler, track adjuster, travel device, slew bearing, and swivel joint & accessories. Each section lists the relevant parts, quantities, part numbers, and other details.
Takeuchi tb025 compact excavator parts catalogue manual (sn 1255001 1258249)fskkkdjskemd
This document is a parts manual for a crawler excavator that includes exploded diagrams and lists of parts for various assemblies. It provides the part numbers, descriptions, quantities, and reference pages for components such as the lower frame, crawler belt, carrier roller, track roller, front idler, track adjuster, travel device, dozer blade, and other assemblies. Serial numbers covered are 1255001-1258249.
Massey ferguson mf 535 combines ( 1115200) parts catalogue manualfskkkdjskemd
This document contains parts lists and descriptions for various components of Massey Ferguson MF 530/535 combines, including the engine and accessories, cylinder block, crankshaft, cylinder head, and cylinder head cover. It lists part numbers, quantities, descriptions, and other details for over 60 individual parts across these systems. Reference numbers and page numbers are provided at the bottom of each section.
Massey ferguson mf 530 combines ( 1115200) parts catalogue manualfskkkdjskemd
This document contains parts lists and descriptions for various components of Massey Ferguson MF 530/535 combines, including the engine and accessories, cylinder block, crankshaft, cylinder head, and cylinder head cover. It lists part numbers, quantities, descriptions, and other details for over 60 individual parts across these systems. Reference numbers and page numbers are provided at the bottom of each section.
Massey ferguson mf 525 combines parts catalogue manual part no. 819611fskkkdjskemd
This document provides the parts list and descriptions for a Massey Ferguson MF 520/525 combine cylinder head cover with 72 items numbered and described. It includes the part numbers, quantities, descriptions and any relevant comments on the parts that make up the cylinder head cover and its components. Serial numbers are referenced for some part applicability.
Massey ferguson mf 520 combines parts catalogue manual part no. 819611fskkkdjskemd
This document provides the parts list and descriptions for a Massey Ferguson MF 520/525 combine cylinder head cover with 72 items numbered and described. It includes the part numbers, quantities, descriptions and any relevant comments on the parts that make up the cylinder head cover and its components. Serial numbers are referenced for some part applicability.
Massey ferguson mf 506 combine parts catalogue manualfskkkdjskemd
The document contains parts lists and technical specifications for the Massey Ferguson MF 506 combine harvester. It lists parts for different components of the combine, including knives of various lengths (8', 10', 12'), the knife drive system, the drive box, and an 8' drive shaft. Each component section includes an item number, part number, quantity, part description, and sometimes additional comments. The purpose is to provide the parts and details needed to service and repair the MF 506 combine.
Massey ferguson mf 487 combine parts catalogue manualfskkkdjskemd
This document provides parts listings and descriptions for various components of a Massey Ferguson MF 487 combine, including 8', 10', and 12' knives and their associated parts, the knife drive systems, and the combine reel components. The listings include part numbers, quantities, descriptions, and other identifying information for each component. References to additional pages provide more details on specific parts like the wobble drive component.
Massey ferguson mf 440 combine parts catalogue manualfskkkdjskemd
This document provides a list of parts for a Massey Ferguson MF 440 combine. It includes over 150 individual part items or assemblies for the engine, cylinder block, crankshaft, cylinder head, air induction, and other systems. Each part is listed with its number, quantity, description, and any relevant comments. The level of detail in the parts list indicates it is intended for maintenance and repair of the MF 440 combine.
Massey ferguson mf 410 combine (fr) parts catalogue manualfskkkdjskemd
This document contains parts listings and descriptions for components of a Massey Ferguson MF 410 combine harvester, including:
- The knife and knife drive arrangement, listing 21 parts such as nuts, bearings, pulleys, and knives.
- The knife drive box, listing 33 parts such as seals, bearings, pins, shafts, and housings.
- The reel rear shaft and variator, listing 53 parts such as bearings, pulleys, sprockets, belts, brackets, springs, and housings.
- The reel arms and pulleys, listing 41 parts including arms, pulleys, bearings, belts, springs, bushes, and carriers.
Massey ferguson mf 399 tractor, a6.354.4 engine parts catalogue manualfskkkdjskemd
The document provides parts information for a Massey Ferguson MF 399 tractor with an A6.354.4 engine and serial number 819753. It includes 5 pages detailing over 80 individual parts that make up the engine, cylinder block, crankshaft, pistons, cylinder head, and other components. Each part is listed with its number, quantity used, description, and any relevant comments.
The document appears to be a parts list for a Massey Ferguson MF 374 VQ cab tractor from 1995. It contains over 60 items with part numbers, descriptions, quantities and other details. The list is organized into sections for the engine assembly, short engine, cylinder block, crankshaft/pistons/connecting rods, and cylinder head. Each item has additional information on fit, finish, thickness and quantity depending on the number of tractors sold.
Massey ferguson mf 374 aq cab tractor parts catalogue manualfskkkdjskemd
This document contains parts listings and technical specifications for components of a Massey Ferguson MF 374 AQ cab tractor, including the engine. It lists over 60 individual parts that make up the engine assembly, cylinder block, crankshaft, pistons, cylinder head and other engine components. Each part is identified by number, description, quantity used, and other technical details. The document also includes explanatory notes on part numbers, fitment, and quantities applicable to different production volumes.
Toro reelmaster 7000 mower service repair manualfskkkdjskemd
This document provides safety instructions for operating, maintaining, and servicing the Reelmaster 7000. It outlines general safety practices including wearing proper protective equipment and following safety decals/symbols. Specific safety instructions are provided for before operating, while operating, and maintenance/service of the machine. Jacking instructions and locations of safety decals are also included.
Toro pro sweep (model 07066) service repair manualfskkkdjskemd
This document is a service manual for the Pro Sweep model 07066. It provides information for technicians to troubleshoot, test, and repair major systems and components of the Pro Sweep. The manual contains chapters covering safety, product records and maintenance, hydraulic and electrical systems, chassis, and electrical diagrams. Technicians are instructed to follow all safety procedures when servicing equipment to prevent injury.
Toro groundsmaster 4010 d (model 30446) service repair manualfskkkdjskemd
This document is a service manual for the Groundsmaster 4000-D and 4010-D. It contains 10 chapters that cover safety procedures, product records and maintenance, the Kubota diesel engine, hydraulic system, electrical system, axles/brakes, chassis, cutting decks, operator cab, and foldout diagrams. The manual provides service technicians with information for troubleshooting, testing, and repairing major systems and components.
Toro groundsmaster 4000 d (model 30448) service repair manualfskkkdjskemd
This document is a service manual for the Groundsmaster 4000-D and 4010-D. It contains 10 chapters that cover safety procedures, product records and maintenance, the Kubota diesel engine, hydraulic system, electrical system, axles/brakes, chassis, cutting decks, operator cab, and foldout diagrams. The manual provides service technicians with information for troubleshooting, testing, and repairing major systems and components.
Takeuchi tl140 crawler loader parts catalogue manual (sn 21400011 and up)fskkkdjskemd
This document provides a parts list and references for a TL140 excavator with serial number 21400011-. It includes 28 items related to the piping for the operation lever for serial numbers 21400011-21401390. The parts are numbered and include descriptions, quantities, and part numbers. Reference pages are provided at the end of each section.
Takeuchi tl120 crawler loader parts catalogue manual (sn 21200008 and up)fskkkdjskemd
This document provides a parts list for a TL120 excavator. It contains 84 items describing various engine, undercarriage, and structural parts along with their part numbers, descriptions, quantities, and other details. The parts are grouped into sections covering the engine and accessories, undercarriage, frame, hydraulic and electrical systems, covers and attachments. The document includes references to other parts manuals and serves as an index of replaceable components for the excavator.
Takeuchi tb175 compact excavator parts catalogue manual (sn 17510003 and up)fskkkdjskemd
This document provides parts information for a TB175 excavator. It includes exploded diagrams and part lists for the lower frame, crawler belt, carrier rollers, track rollers, front idler, track adjuster, travel device, slew bearing, swivel joint and accessories, and dozer blade. The parts are identified by part number, description, and quantity. Serial numbers are provided for some parts to indicate applicability.
Takeuchi tb125 compact excavator parts catalogue manual (sn 12510009 and up)fskkkdjskemd
The document provides parts information for a TB125 excavator with serial number 12510009-. It includes sections for the lower frame, crawler belt, carrier roller, track roller, front idler, track adjuster, travel device, slew bearing, and swivel joint & accessories. Each section lists the relevant parts, quantities, part numbers, and other details.
Takeuchi tb025 compact excavator parts catalogue manual (sn 1255001 1258249)fskkkdjskemd
This document is a parts manual for a crawler excavator that includes exploded diagrams and lists of parts for various assemblies. It provides the part numbers, descriptions, quantities, and reference pages for components such as the lower frame, crawler belt, carrier roller, track roller, front idler, track adjuster, travel device, dozer blade, and other assemblies. Serial numbers covered are 1255001-1258249.
Massey ferguson mf 535 combines ( 1115200) parts catalogue manualfskkkdjskemd
This document contains parts lists and descriptions for various components of Massey Ferguson MF 530/535 combines, including the engine and accessories, cylinder block, crankshaft, cylinder head, and cylinder head cover. It lists part numbers, quantities, descriptions, and other details for over 60 individual parts across these systems. Reference numbers and page numbers are provided at the bottom of each section.
Massey ferguson mf 530 combines ( 1115200) parts catalogue manualfskkkdjskemd
This document contains parts lists and descriptions for various components of Massey Ferguson MF 530/535 combines, including the engine and accessories, cylinder block, crankshaft, cylinder head, and cylinder head cover. It lists part numbers, quantities, descriptions, and other details for over 60 individual parts across these systems. Reference numbers and page numbers are provided at the bottom of each section.
Massey ferguson mf 525 combines parts catalogue manual part no. 819611fskkkdjskemd
This document provides the parts list and descriptions for a Massey Ferguson MF 520/525 combine cylinder head cover with 72 items numbered and described. It includes the part numbers, quantities, descriptions and any relevant comments on the parts that make up the cylinder head cover and its components. Serial numbers are referenced for some part applicability.
Massey ferguson mf 520 combines parts catalogue manual part no. 819611fskkkdjskemd
This document provides the parts list and descriptions for a Massey Ferguson MF 520/525 combine cylinder head cover with 72 items numbered and described. It includes the part numbers, quantities, descriptions and any relevant comments on the parts that make up the cylinder head cover and its components. Serial numbers are referenced for some part applicability.
Massey ferguson mf 506 combine parts catalogue manualfskkkdjskemd
The document contains parts lists and technical specifications for the Massey Ferguson MF 506 combine harvester. It lists parts for different components of the combine, including knives of various lengths (8', 10', 12'), the knife drive system, the drive box, and an 8' drive shaft. Each component section includes an item number, part number, quantity, part description, and sometimes additional comments. The purpose is to provide the parts and details needed to service and repair the MF 506 combine.
Massey ferguson mf 487 combine parts catalogue manualfskkkdjskemd
This document provides parts listings and descriptions for various components of a Massey Ferguson MF 487 combine, including 8', 10', and 12' knives and their associated parts, the knife drive systems, and the combine reel components. The listings include part numbers, quantities, descriptions, and other identifying information for each component. References to additional pages provide more details on specific parts like the wobble drive component.
Massey ferguson mf 440 combine parts catalogue manualfskkkdjskemd
This document provides a list of parts for a Massey Ferguson MF 440 combine. It includes over 150 individual part items or assemblies for the engine, cylinder block, crankshaft, cylinder head, air induction, and other systems. Each part is listed with its number, quantity, description, and any relevant comments. The level of detail in the parts list indicates it is intended for maintenance and repair of the MF 440 combine.
Massey ferguson mf 410 combine (fr) parts catalogue manualfskkkdjskemd
This document contains parts listings and descriptions for components of a Massey Ferguson MF 410 combine harvester, including:
- The knife and knife drive arrangement, listing 21 parts such as nuts, bearings, pulleys, and knives.
- The knife drive box, listing 33 parts such as seals, bearings, pins, shafts, and housings.
- The reel rear shaft and variator, listing 53 parts such as bearings, pulleys, sprockets, belts, brackets, springs, and housings.
- The reel arms and pulleys, listing 41 parts including arms, pulleys, bearings, belts, springs, bushes, and carriers.
Massey ferguson mf 399 tractor, a6.354.4 engine parts catalogue manualfskkkdjskemd
The document provides parts information for a Massey Ferguson MF 399 tractor with an A6.354.4 engine and serial number 819753. It includes 5 pages detailing over 80 individual parts that make up the engine, cylinder block, crankshaft, pistons, cylinder head, and other components. Each part is listed with its number, quantity used, description, and any relevant comments.
The document appears to be a parts list for a Massey Ferguson MF 374 VQ cab tractor from 1995. It contains over 60 items with part numbers, descriptions, quantities and other details. The list is organized into sections for the engine assembly, short engine, cylinder block, crankshaft/pistons/connecting rods, and cylinder head. Each item has additional information on fit, finish, thickness and quantity depending on the number of tractors sold.
Massey ferguson mf 374 aq cab tractor parts catalogue manualfskkkdjskemd
This document contains parts listings and technical specifications for components of a Massey Ferguson MF 374 AQ cab tractor, including the engine. It lists over 60 individual parts that make up the engine assembly, cylinder block, crankshaft, pistons, cylinder head and other engine components. Each part is identified by number, description, quantity used, and other technical details. The document also includes explanatory notes on part numbers, fitment, and quantities applicable to different production volumes.
9. 2 SECTION 10 -- ENGINE -- CHAPTER 1
604.55.071.00 -- 02 -- 2000
GENERAL INFORMATION
DESCRIPTION AND OPERATION
This section describes the engine overhaul and
repair procedures of the Models TC18D and
TC21D tractors. Repair procedures are
essentially the same for all models except as
noted in the repair procedures.
The tractors are equipped with three-cylinder
in-line engines. They are all four cycle, overhead
valve, liquid cooled engines. The engines are
identified by a code cast into the lower right side
of the cylinder block, just behind the hydraulic
pump. The identification numbers of the engines
used is shown in the following chart.
IDENTIFICATION CHART
ENGINE
IDENTIFI-
CATION
TRACTOR
MODEL
HORSE-
POWER
S753 TC18D 18.5
S773 TC21D 21.0
CYLINDER HEAD AND VALVE TRAIN
COMPONENTS
The cylinder head incorporates the valve
assemblies, rocker arms, rocker shaft, push
rods, lifters, and pre-combustion chambers. The
air intake manifold is incorporated into the left
hand side of the valve cover assembly. The
exhaust manifold is bolted on the left-hand side of
the cylinder head. The cylinder heads have
integral valve guides. Standard size valves only
are used. Figure 2 provides a cut-away front and
side view of an engine.
A pre-combustion chamber is located between
the injector assembly and the combustion
chamber of the cylinder and provides an area for
initial ignition of the fuel for improved starting. A
glow plug located in the head extends into the
pre-combustion chamber and, when energized,
pre-heats the fuel-air mixture for improved fuel
ignition under cold weather conditions.
S753
954 cc
1
2
10. SECTION 10 -- ENGINE -- CHAPTER 1 3
604.55.071.00 -- 02 -- 2000
CYLINDER BLOCK ASSEMBLY
The cylinder block assembly contains the
pistons, connecting rods, crankshaft, timing
gears, and engine oil pump. The engine
crankshaft is supported by four main bearings.
The front main bearing is a full circle bearing
positioned in a bore in the front of the block. The
second, third, and fourth main bearings are split
liners located in holders bolted to the block. The
camshaft is supported by two ball bearings one
located on each end of the block. The engines
utilize a straight connecting rod and a three ring
piston.
11. 4 SECTION 10 -- ENGINE -- CHAPTER 1
604.55.071.00 -- 02 -- 2000
ENGINE OVERHAUL
ENGINE DISASSEMBLY
1. Open the radiator drain, 1, and drain and
remove the radiator assembly. See “Radiator
Removal” discussed later in this section,
Page 55.
2. Disconnect the electrical connector, 1, for the
head lamps.
3. Remove the clip pin, 1, from the hood
support, 2, and gradually lower the hood.
1
3
1
4
1
2
5
12. SECTION 10 -- ENGINE -- CHAPTER 1 5
604.55.071.00 -- 02 -- 2000
4. Pull the instrument panel out by hand and
remove the clip pins, 1, from the hood hinge
pins, 2. Then remove the hinge pins.
5. Raise the hood and remove from the tractor.
6. Remove the whole air cleaner assembly, 1,
along with the air cleaner hoses.
7. Remove the two capscrews, 1, and remove
the air cleaner mounting bracket, 2.
1
22
6
1
7
1
2
8
13. 6 SECTION 10 -- ENGINE -- CHAPTER 1
604.55.071.00 -- 02 -- 2000
8. Remove the exhaust muffler and manifold
assembly, 1.
FUEL INJECTOR AND GLOW PLUG
REMOVAL
1. Clean all dirt and oil from the injectors and
surrounding areas.
2. Disconnect the fuel lines, 1, from the
injectors and cap all openings.
3. Remove the three glow plugs, 2.
4. Disconnect the return line to the fuel tank
from the number three injector.
5. Remove the injector assemblies, 3.
NOTE: Be sure to remove the injector
sealing washer from the injector bore, if
not removed with the injector.
OIL PRESSURE SWITCH REMOVAL
1. Disconnect and remove the oil pressure
switch, 1.
1
9
2
1
3 3
1
10
1
11
14. SECTION 10 -- ENGINE -- CHAPTER 1 7
604.55.071.00 -- 02 -- 2000
TEMPERATURE SENDING SWITCH AND
ALTERNATOR REMOVAL
1. Remove the temperature sending switch, 1,
from the front of the cylinder head.
2. Loosen the alternator mounting bolts, 2, and
remove the V-belt, 3, from the drive pulley.
3. Disconnect the wires from the back of the
alternator.
4. Remove the alternator mounting bolts and
remove the alternator, 4.
FAN, WATER PUMP, AND EXTERNAL OIL
TUBE REMOVAL
1. Remove the fan and water pump assembly.
See “Water Pump and Thermostat Removal”
discussed later in this section, page 57.
2. Remove the external oil transfer tube banjo
bolts, 1, from the front of the cylinder head
and the side of the cylinder block and remove
the external oil transfer tube.
VALVE COVER REMOVAL
1. Remove the valve cover, 1, and gasket.
2 1
3
4
12
1
1
13
1
14
15. 8 SECTION 10 -- ENGINE -- CHAPTER 1
604.55.071.00 -- 02 -- 2000
ROCKER SHAFT AND PUSH ROD
REMOVAL
1. Remove the valve rocker arms, 1, shaft, 2,
rocker arm supports, 3, and springs, 4, as an
assembly
2. Remove the push rods, 5.
NOTE: Be sure to keep the valve
components in separately marked
containers for re-assembly in their
original position.
CYLINDER HEAD REMOVAL
1. To remove the cylinder head, remove the
cylinder head bolts, 1, by alternately
loosening a half turn at a time to prevent
warping the head.
VALVE TAPPET REMOVAL
1. Remove the valve tappets, 1, from the
machined bore in the cylinder block.
NOTE: Be sure to keep the valve
components in separately marked
containers for re-assembly in their
original position.
2
1
3
4
5
15
1
16
1
17
16. SECTION 10 -- ENGINE -- CHAPTER 1 9
604.55.071.00 -- 02 -- 2000
FUEL SHUT-OFF SOLENOID REMOVAL
1. Remove the wire connector, 1, and unscrew
the fuel shut-off solenoid, 2.
ENGINE TIMING GEAR COVER, TIMING
GEARS, AND CAMSHAFT
1. Drain the engine crankcase oil into a suitable
container.
2. Remove the nut, 1, and washer, 2, and
remove the pulley, 3, from the crankshaft, 4.
3. Disconnect the throttle control cable from the
governor lever, 3, Figure 18.
4. Remove the injection pump mounting bolts
and raise the injection pump enough to
remove the spring pin, 1, and separate the
governor link from the control rack.
1
2
3
18
3
4
2
1
19
1
20
17. 10 SECTION 10 -- ENGINE -- CHAPTER 1
604.55.071.00 -- 02 -- 2000
5. If equipped, remove the power steering
pump reservoir tank dipstick-filler cap, 1.
Remove the reservoir drain plug, 2, from the
bottom of the reservoir, and drain the fluid out
of the reservoir tank, 3, into a suitable
container.
6. Loosen the hose clamp, 4, on the suction
tube and disconnect the hose from the
suction tube.
7. Remove the pressure tube, 5, from the
engine side of the steering pump.
8. Remove the through bolts, 6, and remove the
steering pump from the front cover. Cap and
plug all lines and openings.
9. Remove the retaining bolts, 1, and lift the
front cover, 2, and gasket, 3, off the locating
dowels.
4
2
1
6
3
5
21
3
2
1
22
18. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
19. SECTION 10 -- ENGINE -- CHAPTER 1 11
604.55.071.00 -- 02 -- 2000
Timing Gears and Camshaft Removal
1. Remove the retaining ring, 1, and remove the
idler gear and oil pump assembly, 2.
2. Remove the two bolts securing the keeper
plate, 1. One bolt must be accessed using
the access hole, 2, in the cam gear.
3. Slide the camshaft and gear out of the
camshaft bore.
Oil Sump Removal
1. Remove the oil sump retainer bolts, 1.
2. Remove the oil sump and discard gasket.
1
2
23
2
1
24
1
25
20. 12 SECTION 10 -- ENGINE -- CHAPTER 1
604.55.071.00 -- 02 -- 2000
Oil Suction Pipe and Strainer Removal
1. Remove the two retaining bolts, 1.
2. Remove the oil strainer, 2, and rotate the oil
suction pipe, 3, out of it’s bore.
Connecting Rods, Bearings, and Piston
Removal
1. Remove the bolts, 1, retaining the three
connecting rod caps, 2.
2. Remove the connecting rod caps with lower
half of the connecting rod bearing.
3. If necessary, remove any ridge from the top
of the cylinder bores using a suitable ridge
reamer.
4. Push the piston and connecting rod out of the
cylinder block.
5. Replace the connecting rod caps to the
piston assembly it was removed from. Keep
together in cylinder sequence.
2
3
1
26
2
1
27
28