Successfully reported this slideshow.
We use your LinkedIn profile and activity data to personalize ads and to show you more relevant ads. You can change your ad preferences anytime.

ABB Software tools - DOC 2

14,220 views

Published on

ABB Software tools -DOC 2
Electrical Installation Calculation and Dimensioning.
DOC is the ABB SACE program for the calculation of medium and low voltage electrical networks.

Published in: Technology, Business

ABB Software tools - DOC 2

  1. 1. Help ABB SACE – A Division of ABB S.p.A., MK-TO, 2011 March DOC Electrical Installation Calculation and Dimensioning© ABB GroupFebruary 28, 2011 | Slide 1
  2. 2. Contents Introduction Aim of the application Target users Product managed How it works Features Use cases Support Tools ABB Software Desktop Assistance How to obtain the software© ABB GroupFebruary 28, 2011 | Slide 2
  3. 3. DOC Introduction© ABB GroupFebruary 28, 2011 | Slide 3
  4. 4. Aim of the application DOC is the software for ElectricalIntroductionAim of the application Installations Calculation and DimensioningTarget usersProduct managed Draw single-line diagramsHow it worksFeatures Perform electrical calculation according to theSupport ToolsASD StandardsAssistanceHow to obtain thesoftware Choose the correct switching and protecting devices (MV and lv devices) Set the trip units and check for discrimination Prepare a complete project documentation© ABB GroupFebruary 28, 2011 | Slide 4
  5. 5. Target user DOC is complete and precise, but smart andIntroductionAim of the application flexible and can be used from everyoneTarget usersProduct managed interested in calculating electrical installationHow it worksFeatures or part of themSupport Tools ConsultantsASDAssistanceHow to obtain the Electrical Engineerssoftware Panel builders Installers ABB Technical Support© ABB GroupFebruary 28, 2011 | Slide 5
  6. 6. Product managed DOC allows and the selection of a wideIntroductionAim of the application range of ABB ProductsTarget usersProduct managed Medium Voltage productsHow it worksFeatures Low Voltage productsSupport ToolsASDAssistance MotorsHow to obtain thesoftware Transformers© ABB GroupFebruary 28, 2011 | Slide 6
  7. 7. Product managed Low Voltage ProductsIntroductionAim of the application Air Circuit- BreakersTarget usersProduct managed New EmaxHow it worksFeatures EmaxSupport ToolsASDAssistanceHow to obtain thesoftware© ABB GroupFebruary 28, 2011 | Slide 7
  8. 8. Product managed Low Voltage ProductsIntroductionAim of the application Molded Case Circuit BreakersTarget usersProduct managed TmaxHow it worksFeatures IsomaxSupport Tools Tmax XTASDAssistanceHow to obtain thesoftware© ABB GroupFebruary 28, 2011 | Slide 8
  9. 9. Product managed Low Voltage ProductsIntroductionAim of the application Miniature Circuit BreakersTarget usersProduct managed System PRO MHow it worksFeatures System PRO M CompactSupport Tools S800ASDAssistance SmisslineHow to obtain thesoftware© ABB GroupFebruary 28, 2011 | Slide 9
  10. 10. Product managed Low Voltage ProductsIntroductionAim of the application RCCBsTarget usersProduct managed System PRO MHow it worksFeatures System PRO M CompactSupport ToolsASDAssistanceHow to obtain thesoftware© ABB GroupFebruary 28, 2011 | Slide 10
  11. 11. Product managed Low Voltage ProductsIntroductionAim of the application FusesTarget usersProduct managed OFAXHow it worksFeatures OFASBSupport ToolsASDAssistanceHow to obtain thesoftware© ABB GroupFebruary 28, 2011 | Slide 11
  12. 12. Product managed Low Voltage ProductsIntroductionAim of the application Switch FusesTarget usersProduct managed E930How it worksFeatures OESASupport Tools OSASDAssistanceHow to obtain thesoftware© ABB GroupFebruary 28, 2011 | Slide 12
  13. 13. Product managed Low Voltage ProductsIntroductionAim of the application DisconnectorsTarget usersProduct managed New Emax MSHow it worksFeatures Emax MSSupport Tools Tmax DASDAssistance Isomax DHow to obtain thesoftware OT OETL E200© ABB GroupFebruary 28, 2011 | Slide 13
  14. 14. Product managed Low Voltage ProductsIntroductionAim of the application ContactorsTarget usersProduct managed AHow it worksFeatures AFSupport Tools ENASDAssistance ESBHow to obtain thesoftware E250 E259 E260© ABB GroupFebruary 28, 2011 | Slide 14
  15. 15. Product managed Low Voltage ProductsIntroductionAim of the application Manual Motor StarterTarget usersProduct managed MS116, MS325, MS450, MS495, MS496How it worksFeatures MO325, MO450, MO495, MO496 , MO497Support ToolsASDAssistanceHow to obtain thesoftware© ABB GroupFebruary 28, 2011 | Slide 15
  16. 16. Product managed Low Voltage ProductsIntroductionAim of the application Thermal OverloadTarget usersProduct managed TAxxDU, ExxDUHow it worksFeatures UMC-22Support ToolsASDAssistanceHow to obtain thesoftware© ABB GroupFebruary 28, 2011 | Slide 16
  17. 17. Product managed Medium Voltage ProductsIntroductionAim of the application Circuit breakerTarget usersProduct managed Secondary distribution SF6 and Vacuum up to 24kV 630A 16kAHow it worksFeatures Primary distribution SF6 and Vacuum up to 36kV 3150A 50kASupport ToolsASDAssistanceHow to obtain thesoftware© ABB GroupFebruary 28, 2011 | Slide 17
  18. 18. Product managed Medium Voltage ProductsIntroductionAim of the application Circuit breakerTarget usersProduct managed REF542Plus/DKHow it worksFeatures PR521/DKSupport Tools PR521/P (50-51)ASDAssistance PR521/P (50-51-51N)How to obtain thesoftware REF542Plus REF610 REJ525 PR512/P (50-51) PR512/P (50-51-50N-51N) PR512/PD© ABB GroupFebruary 28, 2011 | Slide 18
  19. 19. Product managed Medium Voltage ProductsIntroductionAim of the application DisconnectorsTarget usersProduct managed SHS2/AHow it worksFeatures SHS2/ISupport Tools SHS2/IBASDAssistance SHS2/IFHow to obtain thesoftware SHS2/N-I Earth Disconnectors© ABB GroupFebruary 28, 2011 | Slide 19
  20. 20. Product managed Medium Voltage ProductsIntroductionAim of the application Switch DisconnectorsTarget usersProduct managed SHS2/T1How it worksFeatures SHS2/T1MSupport Tools SHS2/T2ASDAssistance SHS2/T2FHow to obtain thesoftware SHS2/T2M SHS2/T2MF SHS2/N-T1 SHS2/N-T1M SHS2/N-T2 SHS2/N-T2F SHS2/N-T2M SHS2/N-T2MF© ABB GroupFebruary 28, 2011 | Slide 20
  21. 21. Product managed Medium Voltage ProductsIntroductionAim of the application General Purpose FusesTarget usersProduct managed CEF 7.2kV 200AHow it worksFeatures CEF 12kV 125ASupport Tools CEF 17.5kV 100AASDAssistanceHow to obtain the CEF 24kV 80Asoftware Motor Fuses CEM 7.2kV 315A CEM 12kV 100A© ABB GroupFebruary 28, 2011 | Slide 21
  22. 22. Product managed Medium Voltage ProductsIntroductionAim of the application CablesTarget usersProduct managed Sized according toHow it works the ABBFeatures “XLPE Cable SystemsSupport ToolsASD Users Guide"AssistanceHow to obtain thesoftware© ABB GroupFebruary 28, 2011 | Slide 22
  23. 23. Product managed Other ProductsIntroductionAim of the application MotorsTarget usersProduct managed M2xxxHow it worksFeatures M3xxxSupport ToolsASD TransformersAssistanceHow to obtain thesoftware Oil Distribution Transformers RESIBLOC© ABB GroupFebruary 28, 2011 | Slide 23
  24. 24. How it works DOC How it Works© ABB GroupFebruary 28, 2011 | Slide 24
  25. 25. Features - Professional and Light Profiles DOC can be used with 2 different profilesIntroduction Depending on the user needs and skills it can be recommended to useAim of the applicationTarget users the Light Profile which hides the advanced and complex featuresProduct managedHow it works DOC Light is for ...Features ... first time, unskilled DOC usersSupport ToolsASD ... installers – panel buildersAssistanceHow to obtain the who need a simple tool to drawsoftware and verify small networks DOC Professional is for ... ... skilled DOC users ... customers working on industrial applications ... engineering companies – OEM’s looking for a powerful calculation and design tool© ABB GroupFebruary 28, 2011 | Slide 25
  26. 26. Features - Single line diagram drawing Different layout available:Introduction Blank PageAim of the applicationTarget users More flexibleProduct managed Allows representing rings and meshesHow it worksFeatures Main project data available beside the objectsSupport ToolsASDAssistanceHow to obtain thesoftware Column Page Faster and easier drawing Main project data available in the grid© ABB GroupFebruary 28, 2011 | Slide 26
  27. 27. Features - Single line diagram drawing Different ways to draw the symbols:Introduction By Single ObjectsAim of the applicationTarget users More flexibleProduct managed Allows representing rings and meshesHow it worksFeaturesSupport ToolsASDAssistanceHow to obtain thesoftware By Macros Faster and easier drawing Note: it is possible to use Single Objects and Macros independently from the layout© ABB GroupFebruary 28, 2011 | Slide 27
  28. 28. Features - Single line diagram drawing When using the Column layout, Objects are numbered by Page &Introduction ColumnAim of the applicationTarget usersProduct managed All the object in the same feeder have the same numberHow it worksFeatures I.e: Page =1, Column=3 leads to QF1.3+ WC1.3 +L1.3Support ToolsASDAssistanceHow to obtain thesoftware© ABB GroupFebruary 28, 2011 | Slide 28
  29. 29. Features - Single line diagram drawing It is possible to draw one scheme on more than one pageIntroduction Use the ‘Add Sheet’ and ‘Change layout’ commands to prepare new emptyAim of the applicationTarget users pagesProduct managedHow it works Use the Cross References to connect two objectsFeaturesSupport Tools Use the ‘Previous/Next Sheet’ commands to turn the pagesASDAssistanceHow to obtain thesoftware© ABB GroupFebruary 28, 2011 | Slide 29
  30. 30. Features - Plant General Properties Window This window is shown when starting a new project. Set all the options carefully to spare time when drawing and calculating the electricalIntroductionAim of the application installationTarget usersProduct managed Main options:How it worksFeatures Power supply definition Voltage levelSupport ToolsASD Default distribution systemAssistanceHow to obtain the Default number of phasessoftware Method for SC calculations Method for cable sizing Options for addressing the device selection© ABB GroupFebruary 28, 2011 | Slide 30
  31. 31. Features - Suggested Workflow A toolbar on the right side of the working area suggests the preferred way to develop a project with DOCIntroductionAim of the applicationTarget usersProduct managedHow it worksFeatures MV diagram drawingSupport ToolsASDAssistance LV diagram drawingHow to obtain thesoftware Calculation and automatic project dimensioning Protection and discrimination verification thru the curves Auxiliaries scheme drawing Switchboard configuration Printouts© ABB GroupFebruary 28, 2011 | Slide 31
  32. 32. Features - MV Diagram Drawing The Medium Voltage section of the project can be drawn by the Macros of the typical units of the Unimix switchboard or by Objects for moreIntroductionAim of the application flexibilityTarget usersProduct managed To pass to the Low Voltage section it is necessary to use theHow it worksFeatures transformers (when a low voltage section is not needed, the drawingSupport Tools can be completed with MV Loads or Motors)ASDAssistanceHow to obtain thesoftware© ABB GroupFebruary 28, 2011 | Slide 32
  33. 33. Features - Lv Diagram Drawing The Low Voltage section of the project can be drawn by the Macros or by Objects for more flexibilityIntroductionAim of the applicationTarget users The Macros available represents the most common ObjectsProduct managed combinations; not available combinations can be realized using theHow it worksFeatures Objects Power SupplySupport ToolsASD 1 Macro = 1 Feeder = ManyAssistanceHow to obtain the single objects Switchboard Arrivalsoftware I.e.: CB+Cable+Load Sub-Switchboard I.e.: Fuse+Cable+Load Faster drawing Interlock graphical representation Pop-up window Feeders When drawing a feeder it is Motor Coordination possible to insert the main data making the drawing phase faster© ABB GroupFebruary 28, 2011 | Slide 33
  34. 34. Features - Calculation and automatic dimensioning Load-FlowIntroductionAim of the application DOC can calculate the current distribution, the voltage profileTarget usersProduct managed and the voltage drop profile in load condition considering:How it works Section with different number of phasesFeatures Unbalanced loads (automatic balance is optional)Support ToolsASD Transformer Voltage RegulatorAssistanceHow to obtain thesoftware Cable dimensioning Presence of meshes More distribution systems© ABB GroupFebruary 28, 2011 | Slide 34
  35. 35. Features - Calculation and automatic dimensioning Cable dimensioningIntroductionAim of the application Given the power required by the loads and the motors, DOC isTarget usersProduct managed able to size the cables in an iterative process bringing to theHow it works section optimization and the current profile calculationFeatures DOC implements several calculation methodsSupport ToolsASDAssistance IEC 60364How to obtain thesoftware CEI 64-8 VDE 298 NFC 15-100 UNE 20460 IEC 60092© ABB GroupFebruary 28, 2011 | Slide 35
  36. 36. Features - Calculation and automatic dimensioning Short CircuitIntroductionAim of the application DOC can calculate the maximum and minimum shortTarget usersProduct managed circuit currents, with or without the motor contribution,How it works for symmetrical and not symmetrical faults, for differentFeatures timesSupport ToolsASD DOC implements several calculation methodsAssistanceHow to obtain thesoftware IEC 60909 IEC 60363 ABB SACE – A Division of ABB S.p.A., MK-TO, 2009 June NFC 15-100 Symmetrical components method© ABB GroupFebruary 28, 2011 | Slide 36
  37. 37. Features - Calculation and automatic dimensioning Configuration ManagementIntroductionAim of the application In DOC it is possible toTarget usersProduct managed simulate differentHow it works scenarios for the electricalFeatures installation defining theSupport ToolsASD open/closed position forAssistanceHow to obtain the the switching andsoftware protecting devices The calculation are performed in the worst condition© ABB GroupFebruary 28, 2011 | Slide 37
  38. 38. Features - Calculation and automatic dimensioning Devices SelectionIntroductionAim of the application The calculation leads to an automatic proposal for allTarget usersProduct managed the devices drawn in the schemeHow it worksFeatures When more than one product is technically suitable, DOC proposes the cheapest oneSupport ToolsASDAssistance It is possible to change the solution proposed by DOCHow to obtain thesoftware and to lock the user choice thanks to the padlocks present in all the selection windows© ABB GroupFebruary 28, 2011 | Slide 38
  39. 39. Features - Calculation and automatic dimensioning DOC gives the possibility to perform the temperature rise- assessment according to IEC 60890 in a early stage of theIntroductionAim of the application installation designTarget usersProduct managedHow it worksFeaturesSupport ToolsASDAssistanceHow to obtain thesoftware© ABB GroupFebruary 28, 2011 | Slide 39
  40. 40. Features - Curves With DOC it is possible to manageIntroduction Time-current diagrams for the devices present in the schemeAim of the applicationTarget usersProduct managed Set the thermomagnetic and electronic trip unitsHow it worksFeatures Realize discrimination studies involving MV and lv devicesSupport ToolsASD Verify the cable protection Time -Current curve L LLAssistanceHow to obtain thesoftware 1E4s 1E3s 100s 10s 1s -TM1 -QF2, HD4 /UniMix-R 24.0 6.12 P230, R EF542Plus/DK 0.1s -QF5, E4S 4000 PR1 21-LI 4000A 1E-2s 1E-2kA 0.1kA 1kA 10kA 100kA© ABB GroupFebruary 28, 2011 | Slide 40
  41. 41. Features – Switchboard configuration With DOC it is now possible to configure switchboard: By using a Wizar configuration: three steps guide procedure to create a switchboard. By using a toolbar on the left side of working area: Insert and move column, Kit and device Tracking busbar system and temperature rise assessment Layer management (door, panel and plate layer, show hide busbars) Modify switchboard dimension Smart commands (switchboard table, labels, accessories)© ABB GroupFebruary 28, 2011 | Slide 41
  42. 42. Features - Project documentation Different reports sections allows the creation of aIntroductionAim of the application unique file documenting the projectTarget usersProduct managed The report sections can be added/removed according to the needsHow it worksFeatures Calculation hypothesisSupport Tools Short circuit calculationsASDAssistance Cable ProtectionsHow to obtain thesoftware MV / lv devices list and settings Export in MS Excel is available The report language can be different from the current language© ABB GroupFebruary 28, 2011 | Slide 42
  43. 43. Support Tools DOC Support Tools© ABB GroupFebruary 28, 2011 | Slide 43
  44. 44. ABB Software Desktop ABB Software Desktop (ASD)IntroductionAim of the application ASD is automatically installed with the first installed softwareTarget usersProduct managed ASD functionalities:How it worksFeatures Allows to run the softwareSupport Tools Manage the languageASDAssistanceHow to obtain the Registrationsoftware Software upgrade Contact Software Support© ABB GroupFebruary 28, 2011 | Slide 44
  45. 45. ABB Software Desktop Manage the languagesIntroductionAim of the application 16 available languagesTarget usersProduct managed ItalianHow it worksFeatures EnglishSupport ToolsASDAssistance GermanHow to obtain thesoftware French Spanish Portuguese, Danish, Turkish, Chinese, Polish, Hungarian, Czech, UA Russian, RU Russian, Bulgarian, Finnish© ABB GroupFebruary 28, 2011 | Slide 45
  46. 46. ABB Software Desktop RegistrationIntroductionAim of the application After registering via internet ,Target usersProduct managed you will receive immediatelyHow it works an e-mail with ID and PSWFeatures to access the UpgradeSupport ToolsASD ServiceAssistanceHow to obtain thesoftware Use them to check for available Upgrades before starting using the Software© ABB GroupFebruary 28, 2011 | Slide 46
  47. 47. ABB Software Desktop Upgrade DOC via internetIntroductionAim of the applicationTarget users Use The Automatic UpgradeProduct managed Service allows you toHow it worksFeatures maintain the softwareSupport Tools aligned to the latestASD improvements deliveredAssistanceHow to obtain thesoftware from ABB SACE them to check for available Upgrades before starting using the Software© ABB GroupFebruary 28, 2011 | Slide 47
  48. 48. Assistance How to contact us – Software supportIntroductionAim of the application Ask the ABB SACE Software Assistance for any question you mayTarget usersProduct managed have regarding the software toolsHow it worksFeatures EmailSupport Tools software.tools@it.abb.comASDAssistanceHow to obtain the On linesoftware http://bol.it.abb.com© ABB GroupFebruary 28, 2011 | Slide 48
  49. 49. How to obtain the software DOC & CAT collection is available ONLINE: You can download DOC & CAT from Business On Line portal, in technical area / work tools. http://bol.it.abb.com/ To download the software it is necessary to specify the UserId and the password received after© ABB GroupFebruary 28, 2011 | Slide 49
  50. 50. © ABB GroupFebruary 28, 2011 | Slide 50

×