PRESENTATION FAB ACADEMY 2012

697 views

Published on

Electronics Production FAB ISP

Published in: Technology
0 Comments
1 Like
Statistics
Notes
  • Be the first to comment

No Downloads
Views
Total views
697
On SlideShare
0
From Embeds
0
Number of Embeds
146
Actions
Shares
0
Downloads
6
Comments
0
Likes
1
Embeds 0
No embeds

No notes for slide

PRESENTATION FAB ACADEMY 2012

  1. 1. FAB ACADEMY 2012 ASSIGNMENTMake the FabISP in-circuit programmer FELIX LIBIO
  2. 2. Milling
  3. 3. Soldering
  4. 4. Programming
  5. 5. Finally we proceed to program in Ubuntu, this requires having the AVR software.Source: http://www.as220.org/fabacademy/tutorials/05.htmlOpen the terminal by typing sudo apt-get install flex byacc bison gcc libusb-devavrdude this to enter Administrator mode.then:sudo apt-get install gcc-avr, put Y = yes.then:sudo apt-get install avr-libcthen:sudo apt-get install libc6-devTo locate the firmware file we have to go to the Desktop:Write or Copy cd Desktop /then:Ls + Enter, to locate the firmware folderthen:Firmware + Enterthen:Ls + Enter
  6. 6. Program the Fab ISP (Ubuntu and Mac):make cleanmake hexsudo make fusesudo make programTo Verify That Your ISP is working correctly:lsusbIf your Fab ISP has been successfullyprogrammed, you should see a list of theUSB devices plugged into your computer.The Fab ISP will be listed in a line like thefollowing:

×