ACTUATOR FOR DAMPERSQuick running actuatorActuator with rotation drive2.5 Nm4 Nm5 Nm8 Nm15 NmFor the application withLabor...
2                     GENERAL OVERVIEW: QUICK RUNNING ACTUATORS    ● = Standard                                           ...
ACTUATOR WITH DIGITAL DRIVE                                                                                               ...
4                   227CS-024-02                                                                                          ...
227CS-024-02                                                                                                              ...
6                   227CS-024-08                                                                                          ...
227CS-024-08                                                                                                              ...
8                   227CS-024-15                                                                                          ...
227CS-024-15                                                                                                              ...
10                   227S-024-05, 227S-024-05-S1, 227S-024-05-P5                                                          ...
227S-024-05, 227S-024-05-S1, 227S-024-05-P5                                                                               ...
12                   227S-230-05, 227S-230-05-S1, 227S-230-05-P5                                                          ...
227S-230-05, 227S-230-05-S1, 227S-230-05-P5                                                                               ...
14                   227S-3-230-05, 227S-3-230-05-S1, 227S-3-230-05-P5                                                    ...
227S-3-230-05,227S-3-230-05-S1,227S-3-320-05-P5                                                                           ...
16                   227CS-024-05                                                                                         ...
227CS-024-05                                                                                                              ...
18                   227CS-024-04                                                                                         ...
227CS-024-04                                                                                                              ...
20                   SPECIFIC CHARACTERISTICS OF CONTINUOUS CONTROL                                     Wiring configurati...
NOTES                                                                                21GRUNER AG                          ...
YOUR WAY TO GRUNER                                                                 Stuttgart                A8            ...
Upcoming SlideShare
Loading in …5
×

Damper Servomotorları Gruner 227 s_en

1,254 views

Published on

Damper Servomotorları Gruner 227 s_en

Published in: Business
0 Comments
1 Like
Statistics
Notes
  • Be the first to comment

No Downloads
Views
Total views
1,254
On SlideShare
0
From Embeds
0
Number of Embeds
2
Actions
Shares
0
Downloads
5
Comments
0
Likes
1
Embeds 0
No embeds

No notes for slide

Damper Servomotorları Gruner 227 s_en

  1. 1. ACTUATOR FOR DAMPERSQuick running actuatorActuator with rotation drive2.5 Nm4 Nm5 Nm8 Nm15 NmFor the application withLaboratory ventilation techniquesRoom ventilation techniquesVAVValves Page: Content: 2 General overview quick running actuator, 2.5 Nm, 5 Nm, 8 Nm + 15 Nm 3 Actuator with digital drive 4 - 5 Technical Data, quick running actuator, 2.5 Nm 6 - 7 Technical Data, quick running actuator, 8 Nm 8 - 9 Technical Data, quick running actuator, 15 Nm 10 - 17 Technical Data, quick running actuator, 5 Nm 18 - 19 Technical Data, quick running actuator, 4 Nm 20 Specific characteristics of continuous control 21 Notes 22 Your way to Gruner rnative alte GR UNER – he frie n dly tGRUNER AG Tel. (++49) 74 26 / 948 - 0 http://www.gruner.dePF 1149, D-78560 Wehingen Fax (++49) 74 26 / 948 - 200 E-Mail: info@gruner.de41/05 · 227S_EN · Copyright by Gruner AG · Technical changes are reserved
  2. 2. 2 GENERAL OVERVIEW: QUICK RUNNING ACTUATORS ● = Standard 02 08 15 ❍ = Optional 4- 4- 4- 02 02 02 S- S- S- 7C 7C 7C Type 22 22 22 Torque 2.5 Nm 8 Nm 15 Nm Running time (90°) 1s 4s 5s Control Tri-state On/Off ● ● ● Continuous control (0) 2...10 VDC or ● ● ● (0) 4...20 mA Power supply 24 VAC/DC ● ● ● 230 VAC Options Digital Drive ❍ ❍ ❍ Feedback signal ● ● ● GUAC Connection ❍ ❍ ❍ Page 4 6 8 P5 S1 ● = Standard P5 P5 S1 S1 5- 5- 5 05 04 5- 5- 5- 5- -0 -0 -0 5 5 ❍ = Optional 4- 4- -0 -0 -0 -0 -0 -0 30 30 30 02 02 24 24 24 30 30 30 -2 -2 -2 S- S- -0 -0 -0 -2 -2 -2 -3 -3 -3 7C 7C 7S 7S 7S 7S 7S 7S 7S 7S 7S Type 22 22 22 22 22 22 22 22 22 22 22 Torque 5 Nm 5 Nm 5 Nm 5 Nm 5 Nm 5 Nm 5 Nm 5 Nm 5 Nm 5 Nm 4 Nm Running time (90°) 20...35s 20...35s 20...35s 20...35s 20...35s 20...35s 20...35s 20...35s 20...35s 20...35s 5s Control Tri-state ● ● ● On/Off ● ● ● ● ● ● ● ● ● Continuous control (0) 2...10 VDC or ● ● Ω (0) 4...20 mA w/ 500Ω Power supply 24 VAC/DC ● ● ● ● ● 230 VAC ● ● ● ● ● ● Options Digital Drive Potentiometer ● ● ● Feedback signal ● ● Auxiliary switch ● ● ● GUAC Connection ❍ Page 10 10 10 12 12 12 14 14 14 16 18 Standard version with universal locking clamp and anti torsion bow. Also available with concentric form locking for shaft (❑ 8 mm) and flange fixing. All actua- tors dispose of manual override button, a mechanical limitation of the angle of rotation and setting button for the rotation direction (cw/ccw). Actuators according to US-standards available upon demand. GRUNER AG Tel. (++49) 74 26 / 948 - 0 http://www.gruner.de PF 1149, D-78560 Wehingen Fax (++49) 74 26 / 948 - 200 E-Mail: info@gruner.de 41/05 · 227S_EN · Copyright by Gruner AG · Technical changes are reserved
  3. 3. ACTUATOR WITH DIGITAL DRIVE 3The actuators with digital drive have no dip switches for setting the functions. All settings are done bythe GUIV (Windows PC or Handheld device) via PP-Bus: Connection schemeAvailable options: • direction of rotation • increasing of running time up to 20 s • control signal Y = (0) 2...10 VDC • control signal Y = (0) 4...20 mA @ 500Ω • feedback signal U = (0) 2...10 VDC • limitation of angle of rotation 0...100% of 95° - αMin correspond (0) 2 VDC BUBN BK GY - αMax correspond 10 VDC • digital control via αConst as variable for angular control Y U/PP Angular control Windows software 100% 0% Y /VDC U 2 10 GUIV Connection PP-Bus LEDs FUNCTION LED 1 2 3 Y U/ PP DATA RD U/ PP CONNECT YE POWER GN GUIV-S BU BN BK GY AC 24V DC 24V - + 1 2 3 5 5 U/ 3 3 PP 2 2 GUIV-S PCGRUNER AG Tel. (++49) 74 26 / 948 - 0 http://www.gruner.dePF 1149, D-78560 Wehingen Fax (++49) 74 26 / 948 - 200 E-Mail: info@gruner.de41/05 · 227S_EN · Copyright by Gruner AG · Technical changes are reserved
  4. 4. 4 227CS-024-02 Applications To regulate dampers, valves or other regulatory functions: • sturdy drive • load independent • torque 2.5 Nm • speed regulated • running time 1 s • direction of rotation changeable from inside • position indication • electromagnetic compatibility controlled • angle of rotation changeable from outside • maintenance-free Technical data Control Continuous control / On/Off Control signal Y (Continuous control) 0...10 VDC or 2...10 VDC (Standard) or 0...20 mA or 4...20 mA Control signal Y (On/Off) 0 VDC (Off) 24 VAC / DC (On) Feedback signal U 0...10 VDC or 2...10 VDC (Standard) Connecting voltage 24 VAC (50/60 Hz) / DC±20% Power consumption 18.0 W Transformer sizing 22.0 VA Angle of rotation max. 95° (adjustable from outside) Direction of rotation changeable from inside Running time (90°) 1s Torque 2.5 Nm Connection cable 900 mm / 0.75 mm2 Safety class III Protection IP 54 (cable downwards) Dimensions 115 x 65 x 89 mm 227CS-024-02 Ambient temperature -20...+50°C Maintenance maintenance-free Connnection scheme CE 73/23/EWG, 89/336/EWG (continuous control) Weight 750 g BUBN BK GY Y U GRUNER AG Tel. (++49) 74 26 / 948 - 0 http://www.gruner.de PF 1149, D-78560 Wehingen Fax (++49) 74 26 / 948 - 200 E-Mail: info@gruner.de 41/05 · 227S_EN · Copyright by Gruner AG · Technical changes are reserved
  5. 5. 227CS-024-02 5 1 Adjustment of the angle of rotation (fig. 1) Both end stops are adjusted to 0° and 90°. For smaller rotation angles, loosen the screws at the metal 1 0 end stop, adjust the end stops as requested, and fasten the screws again. Ø1 6 Fixing of the shaft (fig. 1) by the locking clamp to the damper shaft: ❑ 8...12 mm ∅ 8...16 mm 2 Adjustment of the functional switches (fig. 2) OFF ON Direction of rotation clockwise (0...90°) 3 - counter clockwise (90...0°) - 3 ON Control signal Y OFF 2...10 VDC (Standard) 1, 2 - 1 2 3 4 0...10 VDC 2 1 4...20 mA 1 2 0...20 mA - 1, 2 Switches actually unused must be at position OFF. All switches are set to OFF by factory default. Technical drawing 227CS-024-02GRUNER AG Tel. (++49) 74 26 / 948 - 0 http://www.gruner.dePF 1149, D-78560 Wehingen Fax (++49) 74 26 / 948 - 200 E-Mail: info@gruner.de41/05 · 227S_EN · Copyright by Gruner AG · Technical changes are reserved
  6. 6. 6 227CS-024-08 Application To regulate dampers, valves or other regulatory functions: • sturdy drive • load independent • torque 8 Nm 4 • speed regulated • running time 4 s • direction of rotation changeable from inside • position indication • electromagnetic compatibility controlled • angle of rotation changeable from outside • maintenance-free Technical data Control Continuous control / On/Off Control signal Y (Continuous control) 0...10 VDC or 2...10 VDC (Standard) or 0...20 mA or 4...20 mA Control signal Y (On/Off) 0 VDC (Off) 24 VAC / DC (On) Feedback signal U 0...10 VDC or 2...10 VDC (Standard) Connecting voltage 24 VAC (50/60 Hz) / DC±20% Power consumption 12.0 W Transformer sizing 15.0 VA Angle of rotation max. 95° (adjustable from outside) Direction of rotation changeable from inside Running time (90°) 4s Torque 8 Nm Connection cable 900 mm / 0.75 mm2 Safety class III Protection IP 54 (cable downwards) Dimensions 115 x 65 x 89 mm 227CS-024-08 Ambient temperature -20...+50°C Maintenance maintenance-free Connnection scheme CE 73/23/EWG, 89/336/EWG (continuous control) Weight 750 g BUBN BK GY Y U GRUNER AG Tel. (++49) 74 26 / 948 - 0 http://www.gruner.de PF 1149, D-78560 Wehingen Fax (++49) 74 26 / 948 - 200 E-Mail: info@gruner.de 41/05 · 227S_EN · Copyright by Gruner AG · Technical changes are reserved
  7. 7. 227CS-024-08 7 1 Adjustment of the angle of rotation (fig. 1) Both end stops are adjusted to 0° and 90°. For smaller rotation angles, loosen the screws at the metal 1 0 end stop, adjust the end stops as requested, and fasten the screws again. Ø1 6 Fixing of the shaft (fig. 1) by the locking clamp to the damper shaft: ❑ 8...12 mm ∅ 8...16 mm 2 Adjustment of the functional switches (fig. 2) OFF ON Direction of rotation clockwise (0...90°) 3 - counter clockwise (90...0°) - 3 ON Control signal Y OFF 2...10 VDC (Standard) 1, 2 - 1 2 3 4 0...10 VDC 2 1 4...20 mA 1 2 0...20 mA - 1, 2 Switches actually unused must be at position OFF. All switches are set to OFF by factory default. Technical drawing 227CS-024-08GRUNER AG Tel. (++49) 74 26 / 948 - 0 http://www.gruner.dePF 1149, D-78560 Wehingen Fax (++49) 74 26 / 948 - 200 E-Mail: info@gruner.de41/05 · 227S_EN · Copyright by Gruner AG · Technical changes are reserved
  8. 8. 8 227CS-024-15 Application To regulate dampers, valves or other regulatory functions: • Lifetime under full load • load independent – 8 Nm more than 60,000 cycles • speed regulated – 15 Nm at least 20,000 cycles • direction of rotation changeable from inside • running time 5 s • electromagnetic compatibility controlled • angle of rotation changeable from outside • maintenance-free Technical data Control Conntinuous control / On/Off Control signal Y (Continuous control) 0...10 VDC or 2...10 VDC (Standard) or 0...20 mA or 4...20 mA Control signal Y (On/Off) 0 VDC (Off) 24 VAC / DC (On) Feedback signal U 0...10 VDC or 2...10 VDC (Standard) Connecting voltage 24 VAC (50/60 Hz) / DC±20% Power consumption 20.0 W Transformer sizing 26.0 VA Max. allowable running time per 100 s 50% ED Angle of rotation max. 95° (adjustable from outside) Direction of rotation changeable from inside Running time (90°) 5s Torque 15 Nm Connection cable 900 mm / 0.75 mm2 Safety class III Protection IP 54 (cable downwards) 227CS-024-15 Dimensions 115 x 65 x 89 mm Ambient temperature -20...+50°C Connnection scheme Maintenance maintenance-free (continuous control) CE 73/23/EWG, 89/336/EWG Weight 750 g BUBN BK GY Y U GRUNER AG Tel. (++49) 74 26 / 948 - 0 http://www.gruner.de PF 1149, D-78560 Wehingen Fax (++49) 74 26 / 948 - 200 E-Mail: info@gruner.de 41/05 · 227S_EN · Copyright by Gruner AG · Technical changes are reserved
  9. 9. 227CS-024-15 9 1 Adjustment of the angle of rotation (fig. 1) Both end stops are adjusted to 0° and 90°. For smaller rotation angles, loosen the screws at the metal 1 0 end stop, adjust the end stops as requested, and fasten the screws again. Ø1 6 Fixing of the shaft (fig. 1) by the locking clamp to the damper shaft: ❑ 8...12 mm ∅ 8...16 mm 2 Adjustment of the functional switches (fig. 2) OFF ON Direction of rotation clockwise (0...90°) 3 - counter clockwise (90...0°) - 3 ON Control signal Y OFF 2...10 VDC (Standard) 1, 2 - 1 2 3 4 0...10 VDC 2 1 4...20 mA 1 2 0...20 mA - 1, 2 Switches actually unused must be at position OFF. All switches are set to OFF by factory default. Technical drawing 227CS-024-15GRUNER AG Tel. (++49) 74 26 / 948 - 0 http://www.gruner.dePF 1149, D-78560 Wehingen Fax (++49) 74 26 / 948 - 200 E-Mail: info@gruner.de41/05 · 227S_EN · Copyright by Gruner AG · Technical changes are reserved
  10. 10. 10 227S-024-05, 227S-024-05-S1, 227S-024-05-P5 Application To regulate dampers, valves or other regulatory functions: • sturdy drive • direction of rotation changeable from outside • torque 5 Nm • Auxiliary switch adjustable from outside • load dependent running time • electromagnetic compatibility controlled • position indication • maintenance-free • angle of rotation changeable from outside Technical data Control On/Off + Tristate Connecting voltage 24 VAC (50/60 HZ) / DC ±20% Power consumption 3.5 W Transformer sizing 6.5 VA Angle of rotation max. 95° (adjustable from outside) Direction of rotation changeable from outside Running time (90°) 20...35 s Torque 5 Nm max. 1 auxiliary switch changeable from outside Schaltleistung Zusatzschalter 250 VAC / 5 A, change-over switch Rückführpoti 4.7 kΩ Connection cable 900 mm / 0.75 mm2 Safety class III Protection IP 54 (cable downwards) Dimensions 115 x 65 x 61 mm Ambient temperature -20...+50°C Maintenance maintenance-free CE 73/23/EWG, 89/336/EWG Weight 530 g 227S-024-05 227S-024-05-S1 227S-024-05-P5 Connection scheme Connection scheme Connection scheme BU BNBK BU BNBK BU BNBK BU BNBK On/Off 2 1 3 BU BNBK BU BNBK S1 Tristate Potentiometer 2 1 3 Auxiliary switch GRUNER AG Tel. (++49) 74 26 / 948 - 0 http://www.gruner.de PF 1149, D-78560 Wehingen Fax (++49) 74 26 / 948 - 200 E-Mail: info@gruner.de 41/05 · 227S_EN · Copyright by Gruner AG · Technical changes are reserved
  11. 11. 227S-024-05, 227S-024-05-S1, 227S-024-05-P5 11 1 Adjustment of the angle of rotation (fig. 1) 5 M Both end stops are adjusted to 0° and 90°. For smaller rotation angles, loosen the screws at the metal end stop, adjust the end stops as requested, and fasten the screws again. 1 0 Fixing of the shaft (fig. 1) Ø1 6 by the locking clamp to the damper shaft: ❑ 8...12 mm ∅ 8...16 mm 2 Adjustment of the direction of rotation (fig. 2) The actuator is adjusted to clockwise direction by the factory => “R“. For changing the direction of rota- tion, turn the adjusting knob to “L”. 227S-024-05-S1 0 ,2 24VAC/ DC 50/60Hz 3,5 W ,4 5 Nm ,6 20...35 s Adjustment of the auxiliary switch (fig. 2) IP 54 1 ,8 S2 S3 S2 S3 The scale at the adjusting know corresponds to a percentage graduation, related to 0° - 90°. S1 S1 1) End stop is set to “0“: Switch off the motor and choose the requested switching position by turning 250 VAC 5 (2,5) A the knob to the right, i.e. “.2“ = 20%. S1 S2 S3 BU BN BK 2) End stop is set to “1“: Switch off the motor rand choose the requested switching position by turning the knob to the left, i.e. “.8“ = 20%. Technical drawing 227S-024-05GRUNER AG Tel. (++49) 74 26 / 948 - 0 http://www.gruner.dePF 1149, D-78560 Wehingen Fax (++49) 74 26 / 948 - 200 E-Mail: info@gruner.de41/05 · 227S_EN · Copyright by Gruner AG · Technical changes are reserved
  12. 12. 12 227S-230-05, 227S-230-05-S1, 227S-230-05-P5 Application To regulate dampers, valves or other regulatory functions: • sturdy drive • direction of rotation changeable from outside • torque 5 Nm • Auxiliary switch adjustable from outside • load dependent running time • electromagnetic compatibility controlled • position indication • maintenance-free • angle of rotation changeable from outside Technical data Control On/Off Connecting voltage 230 VAC (50/60 HZ) ±15% Power consumption 2.2 W Transformer sizing 28.0 VA Angle of rotation max. 95° (adjustable from outside) Direction of rotation changeable from outside Running time (90°) 20...35 s Torque 5 Nm max. 1 auxiliary switch changeable from outside Schaltleistung Zusatzschalter 250 VAC / 5 A, change-over switch Rückführpoti 4.7 kΩ Connection cable 900 mm / 0.75 mm2 Safety class II Protection IP 54 (cable downwards) Dimensions 115 x 65 x 61 mm Ambient temperature -20...+50°C Maintenance maintenance-free CE 73/23/EWG, 89/336/EWG Weight 530 g 227S-230-05 227S-230-05-S1 227S-230-05-P5 Connection scheme Connection scheme Connection scheme (On/Off) (On/Off) (On/Off) S1 Auxiliary 2 1 3 switch BU BNBK BU BNBK 2 1 3 BU BNBK Potentiometer N N N L L L GRUNER AG Tel. (++49) 74 26 / 948 - 0 http://www.gruner.de PF 1149, D-78560 Wehingen Fax (++49) 74 26 / 948 - 200 E-Mail: info@gruner.de 41/05 · 227S_EN · Copyright by Gruner AG · Technical changes are reserved
  13. 13. 227S-230-05, 227S-230-05-S1, 227S-230-05-P5 13 1 Adjustment of the angle of rotation (fig. 1) 5 M Both end stops are adjusted to 0° and 90°. For smaller rotation angles, loosen the screws at the metal end stop, adjust the end stops as requested, and fasten the screws again. 1 0 Fixing of the shaft (fig. 1) Ø1 6 by the locking clamp to the damper shaft: ❑ 8...12 mm ∅ 8...16 mm 2 Adjustment of the direction of rotation (fig. 2) The actuator is adjusted to clockwise direction by the factory => “R“. For changing the direction of rota- tion, turn the adjusting knob to “L”. 227S-024-05-S1 0 ,2 24VAC/ DC 50/60Hz 3,5 W ,4 5 Nm ,6 20...35 s Adjustment of the auxiliary switch (fig. 2) IP 54 1 ,8 S2 S3 S2 S3 The scale at the adjusting know corresponds to a percentage graduation, related to 0° - 90°. S1 S1 1) End stop is set to “0“: Switch off the motor and choose the requested switching position by turning 250 VAC 5 (2,5) A the knob to the right, i.e. “.2“ = 20%. S1 S2 S3 BU BN BK 2) End stop is set to “1“: Switch off the motor rand choose the requested switching position by turning the knob to the left, i.e. “.8“ = 20%. Technical drawing 227S-230-05GRUNER AG Tel. (++49) 74 26 / 948 - 0 http://www.gruner.dePF 1149, D-78560 Wehingen Fax (++49) 74 26 / 948 - 200 E-Mail: info@gruner.de41/05 · 227S_EN · Copyright by Gruner AG · Technical changes are reserved
  14. 14. 14 227S-3-230-05, 227S-3-230-05-S1, 227S-3-230-05-P5 Application To regulate dampers, valves or other regulatory functions: • sturdy drive • direction of rotation changeable from outside • torque 5 Nm • Auxiliary switch adjustable from outside • load dependent running time • electromagnetic compatibility controlled • position indication • maintenance-free • angle of rotation changeable from outside Technische Daten Control Tristate Connecting voltage 230 VAC (50/60 HZ) ±15% Power consumption 2.2 W Transformer sizing 28.0 VA Angle of rotation max. 95° (adjustable from outside) Direction of rotation changeable from outside Running time (90°) 20...35 s Torque 5 Nm max. 1 auxiliary switch changeable from outside Schaltleistung Zusatzschalter 250 VAC / 5 A, change-over switch Rückführpoti 4.7 kΩ Connection cable 900 mm / 0.75 mm2 Safety class II Protection IP 54 (cable downwards) Dimensions 115 x 65 x 61 mm Ambient temperature -20...+50°C Maintenance wartungsfrei CE 73/23/EWG, 89/336/EWG Weight 530 g 227S-3-230-05 227S-3-230-05-S1 227S-3-230-05-P5 Connection scheme Connection scheme Connection scheme (Tri-state) (Tri-state) (Tri-state) S1 BU BNBK BU BNBK 2 1 3 BU BNBK 2 1 3 Potentiometer Auxiliary switch N N N L L L GRUNER AG Tel. (++49) 74 26 / 948 - 0 http://www.gruner.de PF 1149, D-78560 Wehingen Fax (++49) 74 26 / 948 - 200 E-Mail: info@gruner.de 41/05 · 227S_EN · Copyright by Gruner AG · Technical changes are reserved
  15. 15. 227S-3-230-05,227S-3-230-05-S1,227S-3-320-05-P5 15 1 Adjustment of the angle of rotation (fig. 1) 5 M Both end stops are adjusted to 0° and 90°. For smaller rotation angles, loosen the screws at the metal end stop, adjust the end stops as requested, and fasten the screws again. 1 0 Fixing of the shaft (fig. 1) Ø1 6 by the locking clamp to the damper shaft: ❑ 8...12 mm ∅ 8...16 mm 2 Adjustment of the direction of rotation (fig. 2) The actuator is adjusted to clockwise direction by the factory => “R“. For changing the direction of rota- tion, turn the adjusting knob to “L”. 227S-024-05-S1 0 ,2 24VAC/ DC 50/60Hz 3,5 W ,4 5 Nm ,6 20...35 s Adjustment of the auxiliary switch (fig. 2) IP 54 1 ,8 S2 S3 S2 S3 The scale at the adjusting know corresponds to a percentage graduation, related to 0° - 90°. S1 S1 1) End stop is set to “0“: Switch off the motor and choose the requested switching position by turning 250 VAC 5 (2,5) A the knob to the right, i.e. “.2“ = 20%. S1 S2 S3 BU BN BK 2) End stop is set to “1“: Switch off the motor rand choose the requested switching position by turning the knob to the left, i.e. “.8“ = 20%. Technical drawing 227S-3-230-05GRUNER AG Tel. (++49) 74 26 / 948 - 0 http://www.gruner.dePF 1149, D-78560 Wehingen Fax (++49) 74 26 / 948 - 200 E-Mail: info@gruner.de41/05 · 227S_EN · Copyright by Gruner AG · Technical changes are reserved
  16. 16. 16 227CS-024-05 Application To regulate dampers, valves or other regulatory functions: • sturdy drive • angle of rotation changeable from outside • torque 5 Nm • direction of rotation changeable from outside • load dependent running time • electromagnetic compatibility controlled • position indication • maintenance-free Technical data Control Continuous control Control signal Y 0...10 VDC or 2...10 VDC (Standard) or 0...20 mA or 4...20 mA Feedback signal U 0...10 VDC or 2...10 VDC (Standard) Connecting voltage 24 VAC (50/60 Hz) / DC ±20% Power consumption 3.5 W Transformer sizing 5.5 VA Angle of rotation max. 95° (adjustable from outside) Direction of rotation changeable from outside Running time (90°) 20...35 s Torque 5 Nm Connection cable 900 mm / 0.75 mm2 Safety class III Protection IP 54 (cable downwards) Dimensions 115 x 65 x 61 mm Ambient temperature -20...+50°C Maintenance maintenance-free 227CS-024-05 CE 73/23/EWG, 89/336/EWG Weight 530 g Connection scheme (Continuous control) BUBN BK GY Y U GRUNER AG Tel. (++49) 74 26 / 948 - 0 http://www.gruner.de PF 1149, D-78560 Wehingen Fax (++49) 74 26 / 948 - 200 E-Mail: info@gruner.de 41/05 · 227S_EN · Copyright by Gruner AG · Technical changes are reserved
  17. 17. 227CS-024-05 17 1 Adjustment of the angle of rotation (fig. 1) 5 M Both end stops are adjusted to 0° and 90°. For smaller rotation angles, loosen the screws at the metal end stop, adjust the end stops as requested, and fasten the screws again. 1 0 Fixing of the shaft (fig. 1) Ø1 6 by the locking clamp to the damper shaft: ❑ 8...12 mm ∅ 8...16 mm 2 Adjustments (fig. 2) Angle of rotation: The actuator is adjusted to clockwise direction by the factory => “R“. For changing the direction of rota- 227CS-024-05 tion, turn the adjusting knob to “L”. 24VAC/DC 50/60Hz 3,5 W Regulation range: 5 Nm 20...35 s The actuators are supplied with the (0) 2...10 VDC for the regulation range 0° to 90°. A smaller angle IP 54 20% 100% Y=2...10VDC (proportional) can be chosen, where the regulation range (0) 2...10 VDC goes for. The actuator must be U=2...10VDC switched off for doing so. BU BN BK GY Y U Technical drawing 227CS-024-05GRUNER AG Tel. (++49) 74 26 / 948 - 0 http://www.gruner.dePF 1149, D-78560 Wehingen Fax (++49) 74 26 / 948 - 200 E-Mail: info@gruner.de41/05 · 227S_EN · Copyright by Gruner AG · Technical changes are reserved
  18. 18. 18 227CS-024-04 Application To regulate dampers, valves or other regulatory functions: • sturdy drive • angle of rotation changeable from outside • torque 4 Nm • direction of rotation changeable from outside • load dependent running time • electromagnetic compatibility controlled • position indication • maintenance-free Technical data Control Continuous control Control signal Y 0...10 VDC or 2...10 VDC (Standard) or 0...20 mA or 4...20 mA Feedback signal U 0...10 VDC or 2...10 VDC (Standard) Connecting voltage 24 VAC (50/60 Hz) / DC ±20% Power consumption 12.0 W Transformer sizing 15.0 VA Angle of rotation max. 95° (adjustable from outside) Direction of rotation changeable from outside Running time (90°) 5s Torque 4 Nm Connection cable 900 mm / 0.75 mm2 Safety class III Protection IP 54 (cable downwards) Dimensions 115 x 65 x 61 mm Ambient temperature -20...+50°C Maintenance maintenance-free 227CS-024-04 CE 73/23/EWG, 89/336/EWG Weight 530 g Connection scheme (Continuous control) BUBN BK GY Y U GRUNER AG Tel. (++49) 74 26 / 948 - 0 http://www.gruner.de PF 1149, D-78560 Wehingen Fax (++49) 74 26 / 948 - 200 E-Mail: info@gruner.de 41/05 · 227S_EN · Copyright by Gruner AG · Technical changes are reserved
  19. 19. 227CS-024-04 19 1 Adjustment of the angle of rotation (fig. 1) 5 M Both end stops are adjusted to 0° and 90°. For smaller rotation angles, loosen the screws at the metal end stop, adjust the end stops as requested, and fasten the screws again. 1 0 Fixing of the shaft (fig. 1) Ø1 6 by the locking clamp to the damper shaft: ❑ 8...12 mm ∅ 8...16 mm 2 Adjustment of the direction of rotation (fig. 2) The actuator is adjusted to clockwise direction by the factory => “R“. For changing the direction of rota- tion, turn the adjusting knob to “L”. 227CS-024-04 24VAC/DC 50/60Hz 12 W 4 Nm 5s IP 54 Y=2...10VDC U=2...10VDC BU BN BK GY Y U Technical drawing 227CS-024-04GRUNER AG Tel. (++49) 74 26 / 948 - 0 http://www.gruner.dePF 1149, D-78560 Wehingen Fax (++49) 74 26 / 948 - 200 E-Mail: info@gruner.de41/05 · 227S_EN · Copyright by Gruner AG · Technical changes are reserved
  20. 20. 20 SPECIFIC CHARACTERISTICS OF CONTINUOUS CONTROL Wiring configuration and recommended cable length - + Y U 227CS - + Y U 227CS BU BN BK GY BU BN BK GY L2 L1 (I +I ) R > A G L 24VAC max. cable length max. cable length transformer I R < G L L2 L1 24VAC transformer - + - + - + - + Y U Y U DC 0(2)...10V DC 0(2)...10V DC 0(2)...10V DC 0(2)...10V by the controller by the actuator by the controller by the actuator current of set valve selector actuator current cable cross section max. cable length cable resistance 0,75 mm2 23 m 1 mm2 31 m cable length 1,5 mm2 46 m 2,5 mm2 76 m cable cross section For several actuators switched in parallel the max. cable length must be divided by the num- ber of actuators. Teach-in of range of angle > 30° 1. Actuator stand by 2. Adjusting mechanical endstops 3. 15 VDC at Y 4. Power on actuator 5. Actuator starts teach-in process of range of angle (10...30 s) BUBN BK GY 6. Remove 15 VDC at Y 15 VDC GRUNER AG Tel. (++49) 74 26 / 948 - 0 http://www..gruner.de PF 1149, D-78560 Wehingen Fax (++49) 74 26 / 948 - 200 E-Mail: info@gruner.de 41/05 · 227S_EN · Copyright by Gruner AG · Technical changes are reserved
  21. 21. NOTES 21GRUNER AG Tel. (++49) 74 26 / 948 - 0 http://www..gruner.dePF 1149, D-78560 Wehingen Fax (++49) 74 26 / 948 - 200 E-Mail: info@gruner.de41/05 · 227S_EN · Copyright by Gruner AG · Technical changes are reserved
  22. 22. YOUR WAY TO GRUNER Stuttgart A8 München Balingen Karlsruhe Schömberg Wehingen A81 Freudenstadt B27 Gosheim Denkingen Tuttlingen Frittlingen Strasbourg Rottweil Spaichingen B14 Aldingen Schramberg Offenburg 34 B27 A5 B33 Freiburg Donaueschingen B31 Singen Zürich Basel N1 N3GRUNER AG Tel. (++49) 74 26 / 948 - 0 http://www..gruner.dePF 1149, D-78560 Wehingen Fax (++49) 74 26 / 948 - 200 E-Mail: info@gruner.de41/05 · 227S_EN · Copyright by Gruner AG · Technical changes are reserved

×