Straumann Bone Level Implant Impression Open Tray Final

9,171 views

Published on

Impression of Straumann Bone Level for Open tray

Published in: Business, Technology
0 Comments
4 Likes
Statistics
Notes
  • Be the first to comment

No Downloads
Views
Total views
9,171
On SlideShare
0
From Embeds
0
Number of Embeds
17
Actions
Shares
0
Downloads
165
Comments
0
Likes
4
Embeds 0
No embeds

No notes for slide

Straumann Bone Level Implant Impression Open Tray Final

  1. 1. OPEN TRAY IMPRESSION TECHNIQUE FOR BONE LEVEL IMPLANTS 1. Place the impression post into 2. Tighten the guide screw using 3. Prepare tray by creating access 4. Apply impression material the implant. the SCS screwdriver. holes for the impression post. around the impression post. This ensures that a complete impression is taken. 5. Fill tray with impression material 6. Let the impression material cure. 7. Using the SCS screwdriver 8. Remove the impression from the and take the impression. loosen the guide screw within the patient’s mouth. impression post. Straumann® is a registered trademark of Straumann Holding AG, or its affiliates. All rights reserved. 2/09 USLIT 268 9. The lab will select the 10. To avoid inaccuracies when 11. When tightening the screw, 12. The impression is now ready Straumann products are CE marked corresponding analog and place connecting the implant analog, it stabilize the retentive section of to be used to create a model. the impression post into the implant must be positioned exactly in line the implant analog to prevent the analog and tighten the guide screw with the grooves of the impression impression post from rotating. by using the SCS screwdriver. post before screwing in. Procedure for NC and RC open tray impression taking is the same. RC COMPONENTS NC COMPONENTS 025.4202 RC Impression post, 025.2202 NC Impression post, © Straumann USA, LLC 2009 with guide screw with guide screw 025.4101 RC Implant analog 025.2101 NC Implant analog 046.401 SCS screwdriver

×