CUSTOMIZED IMPRESSION POST FOR BONE LEVEL IMPLANTS




1. Prepare customized temporary           2. The desired emergence ...
Upcoming SlideShare
Loading in …5
×

Customization of an impression post using a temporary abutment

1,966 views

Published on

Impression of Straumann Bone Level implant using a temporary abutment

Published in: Business, Technology
0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total views
1,966
On SlideShare
0
From Embeds
0
Number of Embeds
11
Actions
Shares
0
Downloads
41
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

Customization of an impression post using a temporary abutment

  1. 1. CUSTOMIZED IMPRESSION POST FOR BONE LEVEL IMPLANTS 1. Prepare customized temporary 2. The desired emergence profile 3. Now that the emergence profile 4. A stock impression post must be abutment to meet your desired for the implant will be achieved has been developed, you will now customized to capture soft tissue emergence profile. with the provisional. want to capture this same emergence emergence profile. Straumann® is a registered trademark of Straumann Holding AG, or its affiliates. All rights reserved. profile when taking a final impression. 2/09 USLIT 269 Blu-Mousse is a registered trademark of Parkell Products, Inc. All rights reserved. Straumann products are CE marked 5. Connect custom temporary abut- 6. Fill small vessel with bite 7. Apply bite registration material 8. Embed the temporary abutment, ment and provisional to implant analog. registration material, such as to the abutment and analog to provisional and implant analog into Blu-Mousse®. ensure a complete impression is the bite registration material. Once taken. material sets, remove provisional and temporary abutment. © Straumann USA, LLC 2009 ® 9. Notice the transfer of the 10. Connect impression coping to 11. Fill the impression with cold 12. Let temporary material cure. shape of the temporary into the implant analog in bite registration cure or auto-polymerizing rapid material. Mark the buccal position material. cure temporary material. for orientation. RC COMPONENTS 025.4202 RC Impression post, with guide screw 024.4370 RC Temporary meso abutment D 7.0 mm 025.4101 RC Implant analog NC COMPONENTS 13. Unscrew temporary post and 14. Notice the matching emergence 15. Screw the custom impression post 025.2202 NC Impression post, trim excess material. Fill any voids, profile of the temporary abutment into the implant and take impression. with guide screw polish and take impression. and impression post. Once impression material sets, unscrew 024.2370 NC Temporary meso the impression post and remove impression. abutment D 5.0 mm The master cast is now ready to be fabricated after the lab analog has 025.2101 NC Implant analog been placed into the impression. Photos courtesy of: Samuel Zfaz, DDS – Fred Norkin, DMD – Jeffrey Ganeles, DMD

×