Successfully reported this slideshow.
We use your LinkedIn profile and activity data to personalize ads and to show you more relevant ads. You can change your ad preferences anytime.

CV Eva Lantsoght

673 views

Published on

CV

Published in: Recruiting & HR
  • Be the first to comment

  • Be the first to like this

CV Eva Lantsoght

  1. 1. Eva Olivia Leontien Lantsoght Place and Date of Birth: Lier, Belgium, 10th of August, 1985 Contact information: elantsoght@usfq.edu.ec, evalantsoght@gmail.com, E.O.L.Lantsoght@tudelft.nl Summary Dr. Lantsoght graduated with a Master’s Degree in Civil Engineering from the Vrije Universiteit Brussel (Brussels, Belgium) in 2008. She later earned a Master's degree in Structural Engineering at the Georgia Institute of Technology (Atlanta, Georgia, USA) in 2009 and the title of Doctor in Structural Engineering from Technische Universiteit Delft (Delft, the Netherlands) in 2013. The work experience of Dr. Lantsoght includes design work in structural and bridge engineering in Belgium (Establis, and Ney & Partners) and working as an independent consultant in structural engineering in Ecuador (Adstren). Dr. Lantsoght is an active member of the technical committees of the Transportation Research Board in Concrete Bridges (AFF-30) and Testing and Evaluation of Transportation Structures (AFF-40), a member of the technical committees of the American Concrete Institute and Deutscher Ausschuß für Stahlbeton Shear Databases (ACI-DAfStb-445-D), and the joint ACI-ASCE (American Society of Civil Engineers) committee on Design of Reinforced Concrete Slabs (ACI-ASCE 421), and an associate member of the committees on Evaluation of Concrete Bridges and Concrete Bridge Elements (ACI 342), on Shear and Torsion (ACI-ASCE 445), and on Strength Evaluation of Existing Concrete Structures (ACI 437). In the academic field, Dr. Lantsoght is a full professor at the Universidad San Francisco de Quito (Quito, Ecuador) and a researcher at Technische Universiteit Delft (Delft, Netherlands). Her field of research is the design and analysis of concrete structures and analysis of existing bridges. Education Ph.D. in Structural Engineering, Technische Universiteit Delft, Delft, The Netherlands, June 2013 M.Sc. in Structural Engineering, Georgia Institute of Technology. Atlanta, GA, USA, August 2009 M.Sc. in Civil and Environmental Engineering, Vrije Universiteit Brussel, Brussels, Belgium, June 2008 Candidate in Engineering, Vrije Universiteit Brussel, Brussels, Belgium, June 2005 Work Experience Full Professor of Research (Profesor Investigador Titular Principal) in Structural Engineering, Universidad San Francisco de Quito, Quito, Ecuador, 2016 - present  Instructor for the following courses: Reinforced Concrete I, Reinforced Concrete II  Research on the analysis of existing bridges, load testing, and plastic design and analysis methods for reinforced concrete members  Supervision of thesis projects Assistant Professor in Structural Engineering, Universidad San Francisco de Quito, Quito, Ecuador, 2013 – 2016  Instructor for the following courses: Design of Pavements, Reinforced Concrete I, Reinforced Concrete II, Construction Materials Laboratory, Structural Analysis I  Planning and development of a laboratory for concrete mixes and for testing of structural concrete  Research on the analysis of existing bridges, Digital Image Correlation and shear and torsion in structural concrete  Supervision of thesis projects Researcher, Technische Universiteit Delft, Delft, the Netherlands, 2013 – present  Research on shear in reinforced concrete slabs  Research on fatigue of concrete in compression  Proof loading of existing bridges
  2. 2. Structural Engineer, Adstren, Quito, Ecuador, 2015 – present  Concrete substructure design for steel bridges and buildings  Design of details in concrete decks  Design of reinforced masonry housing units Research and Teaching Assistant, Technische Universiteit Delft, Delft, the Netherlands, 2009 – 2013  Development of experiments on large-scale specimens to determine the shear capacity of reinforced concrete slab bridges  Development of design models for the calculation of the shear capacity of existing reinforced concrete slab bridges in cooperation with TNO (Dutch Institute for Research and Applied Sciences) and Rijkswaterstaat (Dutch Ministry of Infrastructure and the Environment).  Assessment and forensic investigation of reinforced concrete slab bridge for Gemeente Delft  Supervision of three MSc thesis in structural engineering  Teaching assistant of Prestressed Concrete  Instructor for the module on design for shear in Concrete Structures II  Participant in the project “2Flow: Incorporating the New World of Work into Civil Engineering and Geosciences at TU Delft” Technical translator, the Netherlands, 2010 – 2013  Technical translator for structural engineering companies (Dutch – English)  Interpretation of Dutch design codes Trainee, Establis, Roeselare, Belgium, September 2007  Development of finite element models for steel structures  Field inspections of concrete and steel structures designed by Establis  Development of design sheets for strut and tie models Summer Intern, Ney & Partners, Brussels, Belgium, June 2007  Actualization of design sheets for the design of concrete structures according to the recently implemented Eurocode EN 1992-1-1:2005 Academic Experience Academic Courses - Instructor Universidad San Francisco de Quito, Cumbaya, Ecuador  Design of Pavements  Reinforced Concrete I  Hormigon Armado I  Reinforced Concrete II  Construction Materials Laboratory  Structural Analysis I Academic courses – Adjunct instructor Technische Universiteit Delft, Delft, the Netherlands  Concrete Structures II  Prestressed Concrete
  3. 3. Professional courses - Instructor Zigurat, Spain/online, 2016 – present  Teaching of various modules in the online specialization program on the design and management of bridges Publications Theses and Dissertations Lantsoght, E.O.L. (2013). “Shear capacity of reinforced concrete slabs under concentrated loads close to the support.” Ph.D. Dissertation, Delft University of Technology, Delft, the Netherlands. Lantsoght, E. (2009). “Literature Review of Punching Shear in Reinforced Concrete Slabs.” Structural Engineering, Mechanics and Materials Research Report No. 09-10. Georgia Institute of Technology, Atlanta, GA. Lantsoght, E. (2008). “Evaluation of the new insights on buckling of reinforced concrete column.” (in Dutch) MS.c Thesis, Vrije Universiteit Brussel, Brussels, Belgium. Journal Papers and Refereed Special Publications Kalsbeek, I., Arragon, M. v., Vries, R. d., Ghossein, A., Lourens, K., Plas, A. v. d., Heinsbroek, A., Yip, C., Semiari, A., Tian, K., Kabos, M., Griemink, A., Oortmerssen, L. v., Autar, N., Kraus, J., Reenen, K. v., Smaling, H., Gemeren, W. v., Straten, R. v., Teeuwen, B., Joosten, S., Altinga, N., Markerink, S., Vries, W. d., Lantsoght, E.O.L., and Hoogenboom, P. (2011). "Staafwerkmodellen voor wandliggers getoetst." Cement, 7(2011). Lantsoght, E.O.L., van der Veen, C., and Walraven, J. (2011). "Shear capacity of slabs and slab strips loaded close to the support." SP287 – Recent Developments in Reinforced Concrete Slab Analysis, Design and Serviceability, pp. 5.1-5.17. Lantsoght, E.O.L., van der Veen, C., Walraven, J., de Boer, A., (2012) “Spreiding puntlasten plaatviaducten.” Cement 4(2012). Lantsoght, E.O.L., van der Veen, C., Walraven, J, de Boer, A. (2013) “Shear Assessment of Reinforced Concrete Slab Bridges”. Structural Engineering International 4/2013, pp. 418-426. Lantsoght, E.O.L., van der Veen, C., and Walraven, J. (2013). "Shear in One-way Slabs under a Concentrated Load close to the support." ACI Structural Journal, Vol. 110, No. 2, pp. 275-284. Lantsoght, E.O.L., van der Veen, C., de Boer, A., and Walraven, J. "Influence of width on shear capacity of reinforced concrete members." ACI Structural Journal Vol. 111, No. 6, pp. 1441-1450. Lantsoght, E.O.L., van der Veen, C., de Boer, A., and Walraven, J. "One-way slabs subjected to a combination of loads failing in shear." ACI Structural Journal, Vol. 112, No. 4, pp. 417-426. Lantsoght, E.O.L., van der Veen, C., de Boer, A., and Walraven, J. (2015). "Effective Shear Width of Concrete Slab Bridges." Institute of Civil Engineers – Bridge Engineering, (available online ahead of print) Lantsoght, E.O.L., van der Veen, C., de Boer, A., and Walraven, J. (2015). "Database of wide concrete members failing in shear." Magazine of Concrete Research, Vol. 67, No. 1, pp. 33-52. Lantsoght, E.O.L., van der Veen, C., de Boer, A., and Walraven, J. (2015). " Transition from one-way to two-way shear in slabs under concentrated loads" Magazine of Concrete Research, Vol. 67, nr. 17, pp. 909-922. Lantsoght, E.O.L., van der Veen, C., de Boer, A., and Walraven, J. (2015). "Proposal for the extension of the Eurocode shear formula for one-way slabs under concentrated loads." Engineering Structures, Vol. 95, pp. 16-24. Lantsoght, E.O.L., van der Veen, C., de Boer, A., and Walraven, J. (2015). " Experimental investigation on shear capacity of reinforced concrete slabs with plain bars and slabs on elastomeric bearings." Engineering Structures, Vol. 103, pp. 1-14. Lantsoght, E.O.L., van der Veen, C., Walraven, J, (2015) “Transverse Load Redistribution and Effective Shear Width in Reinforced Concrete Slabs”. Heron. V. 60, Nr. 3, pp. 145-180. Lantsoght, E.O.L., van der Veen, C., de Boer, A., and Walraven, J. (2016). "Comparison of Eurocode and AASHTO for shear in slab bridges." Institute of Civil Engineers – Bridge Engineering, 169, BE4, 285-297 Lantsoght, E.O.L., van der Veen, C., de Boer, A., and Walraven, J. (2016). "Case Study on Aggregate Interlock Capacity for the Shear Assessment of Cracked Reinforced Concrete Bridge Cross-sections." Journal of Bridge Engineering - ASCE, Vol. 21, Nr. 5, pp. 040160041-10.
  4. 4. Lantsoght, E.O.L., van der Veen, C., de Boer, A., (2016). "Proposal for the fatigue strength of concrete under cycles of compression" Construction and Building Materials, Vol. 107, 15 March 2016, pp. 138-156. Lantsoght, E.O.L, van der Veen, C., de Boer, A. and Walraven, J.C. (2016). “Querkrafttragfähigkeit von Platten nähe Auflagern - Übersicht diverser Versuche,” Beton- und Stahlbetonbau, Vol. 111, No. 5, p. 288 – 300 Lantsoght, E.O.L., van der Veen, C. de Boer, A., Hordijk, D.A. (2016). “Probabilistic prediction of the failure mode of the Ruytenschildt Bridge”, Engineering Structures, V. 127, pp. 549 – 558 Lantsoght, E.O.L., Yang, Y., van der Veen, C., de Boer, A., Hordijk, D.A. (2016). “Ruytenschildt Bridge: field and laboratory testing”, Engineering Structures. V. 128, pp. 111-123. Lantsoght, E.O.L., van der Veen, C., de Boer, A., and Alexander, S.D.B (2017). "Extended Strip Model for RC Slabs under Concentrated Loads near Supports" ACI Structural Journal, V. 114, No. 2, pp 565-574. Lantsoght, E.O.L., van der Veen, C., de Boer, A. (2017). "Plastic model for symmetrically and asymmetrically loaded reinforced concrete slabs" ACI SP on slabs, (in press) Lantsoght, E.O.L., van der Veen, C., de Boer, A., and Alexander, S.D.B (2017). "Bridging the gap between one-way and two-way shear in slabs" ACI SP on punching, (in press) Lantsoght, E.O.L., van der Veen, C., de Boer, A., Hordijk, D.A., (2017). "Proof load testing of reinforced concrete slab bridges in the Netherlands" Structural Concrete, (available online ahead of print) Lantsoght, E.O.L., van der Veen, C., de Boer, A. (2017) “Extended Strip Model for slabs under combinations of loads”, Engineering Structures, Vol. 145, pp. 60-69. Bonifaz, E.A., Baus, J.F., Lantsoght, E.O.L., (2017). “Modeling Concrete Material Structure: A Two-Phase Meso Finite Element Model.” Journal of Multiscale Modeling, V. 8, No. 2, 12 pp. Lantsoght, E.O.L., van der Veen, C., de Boer, A., Hordijk, D.A., (2017). "Required proof load magnitude for probabilistic field assessment of viaduct De Beek" Engineering Structures, (in press) Lantsoght, E.O.L., Yang, Y., van der Veen, C., de Boer, A., Hordijk, D.A., (2017). "Beam experiments on acceptance criteria for bridge load tests" ACI Structural Journal, Vol. 114, No. 4, pp. 1031-1042 Lantsoght, E.O.L., Koekkoek, R.T., van der Veen, C., Hordijk, D.A., de Boer, A. (2017). "Assessment of viaduct De Beek through load testing" Journal of Bridge Engineering, (in press) Lantsoght, E.O.L., van der Veen, C., de Boer, A., Hordijk, D.A. (2017). “Collapse test and moment capacity of the Ruytenschildt Reinforced Concrete Slab Bridge”, Structure and Infrastructure Engineering, V. 13, No. 9, pp. 1130- 1145. Lantsoght, E.O.L., Koekkoek, R.T., Hordijk, D.A., de Boer, A., (2017). “Towards standardization of proof load testing: pilot test on viaduct Zijlweg”, Structure and Infrastructure Engineering (in press) Lantsoght, E.O.L., de Boer, A., van der Veen, C. (2017). “Levels of Approximation for the shear assessment of reinforced concrete slab bridges”, Structural Concrete V. 18, No. 1, pp. 143-152 Lantsoght, E.O.L., de Boer, A., van der Veen, C., (2017). "Distribution of peak shear stress in finite element models of reinforced concrete slabs," Engineering Structures, (in press) Book chapters Lantsoght, E.O.L. (2014) “Share your research process via social media.” Invited essay in 53 interesting ways to communicate your research, ed. I. Daly & A. Brophy Haney, The Professional and Higher Partnership, Suffolk, UK. Lantsoght, E.O.L. (2017) “Chapter 10: Field assessment of a concrete bridge: case study”, in Eco-efficient Repair and Rehabilitation of Concrete Infrastructures, F. Pachecho Torgal, R. Melchers, X. Shi, A. Saez, N. de Belie, K. Van Tittelboom, eds., Woodhead publishing series in civil and structural engineering, Cambridge, UK. Books Lantsoght, E.O.L. (2016) “Top PhD Advice from Start to Defense and Beyond – Focus on the Netherlands with Universal Tips&Tricks”. Ed. Francien Horrevorts, Academic Transfer, Bookboon, London, UK, 94 pp. Lantsoght, E.O.L. (201X) “The A-Z of the PhD Trajectory”, Springer Verlag. Lantsoght, E.O.L. (ed.) (201X) “Load testing of bridges”, in: Structures and Infrastructures, D. Frangopol, series ed. Taylor and Francis
  5. 5. Conference Papers Lantsoght, E.O.L., van der Veen, C., and Walraven, J. (2010). "Shear tests of reinforced concrete slabs with concentrated loads near to supports." 8th fib international PhD Symposium in Civil Engineering, G. Fisher, M. Geiker, O. Hededal, L. Ottosen, and H. Stang, eds., DTU Byg, Technical University of Denmark, Kgs. Lyngby, Denmark, pp. 81-86. Lantsoght, E.O.L., van der Veen, C., and Walraven, J. (2010). "Experimental study of reinforced concrete bridge decks under concentrated loads near to supports." Structural Faults and Repair, 13th International Conference and Exhibition, Edinburgh, UK, 12 pp. Lantsoght, E.O.L., van der Veen, C., and Walraven, J. (2011). "Experimental Study of Shear Capacity of Reinforced Concrete Slabs." ASCE Structures Congress, Las Vegas, NV, pp. 152-164. Lantsoght, E.O.L., van der Veen, C., and Walraven, J. (2011). "Experimental Study of Shear in Reinforced Concrete One- Way Slabs subjected to Concentrated Loads." fib symposium Prague, pp. 551-554 Lantsoght, E.O.L., van der Veen, C., and Walraven, J. (2012). "Residual Capacity from aggregate interlock of cracked reinforced concrete slab bridge." IABMAS 2012, 6th international conference on Bridge Maintenance, Safety and Management, Villa Erba, Lake Como, Italy, pp. 3368-3375 Lantsoght, E.O.L. (2012). "Shear tests of reinforced concrete slabs and slab strips under concentrated loads." 9th fib International PhD Symposium in Civil Engineering, Karlsruhe, Germany, pp. 3-8. Lantsoght, E.O.L., van der Veen, C., and Walraven, J. (2012). "Shear assessment of solid slab bridges." ICCRRR 2012, 3rd International Conference on Concrete Repair, Rehabilitation and Retrofitting, Cape Town, South Africa, pp. 827-833. Lantsoght, E.O.L., van der Veen, C., Walraven, J., de Boer, A., (2013). "Shear assessment of reinforced concrete slab bridges" TRB 2013 Washington DC , 17pp. Lantsoght, E.O.L., van der Veen, C., Walraven, J., (2013) "Shear capacity of slabs under a combination of loads" fib Symposium 2013 Engineering a Concrete Future Technology, Modeling & Construction, Tel Aviv, Israel, 12 pp. Lantsoght, E.O.L., van der Veen, C., Walraven, J., de Boer, A. (2013) "Shear assessment of reinforced concrete slab bridges" International IABSE Conference, Assessment, Upgrading and Refurbishment of Structures, Rotterdam, The Netherlands, pp. 76 - 77. Lantsoght, E.O.L., van der Veen, C., Walraven, J. (2013) " Concrete Slabs under a Combination of Loads in Shear" International IABSE Conference, Assessment, Upgrading and Refurbishment of Structures, Rotterdam, The Netherlands, pp. 526-527 Lantsoght, E.O.L., van der Veen, C., Walraven, J. (2013) "Prolonging the service life of existing reinforced concrete slab bridges through experimental studies on the shear capacity" First International Conference on Concrete Sustainability, ICCS 2013, Tokyo, Japan, pp.1052-1059 Lantsoght, E.O.L., van der Veen, C., Walraven, J., de Boer, A. (2013) "Quick Scan Method - Dutch approach for the shear assessment of Reinforced Concrete Slab bridges" 30th International Bridge Conference, Pittsburgh, USA, 8 pp. Lantsoght, E.O.L., de Boer, A., van der Veen, C., Walraven, J. (2013) " Peak shear stress distribution in finite element models of concrete slabs", SEMC 2013, the Fifth International Conference on Structural Engineering, Mechanics and Computation, Cape Town, South Africa, pp. 475 - 480 Lantsoght, E.O.L., van der Veen, C., Walraven, J., de Boer, A. (2013). "Applying Experimental Results to the Shear Assessment Method for Solid Slab Bridges" Concrete 2013, Gold Coast, Australia, 10 pp. Lantsoght, E.O.L., de Boer, A., van der Veen, C., Walraven, J., (2014). "Effective Width in Shear of Reinforced Concrete Solid Slab Bridges under Wheel Loads" TRB 2014 Washington DC, 15 pp. Lantsoght, E.O.L., van der Veen, C., Walraven, J., de Boer, A. (2014). “Recommendations for the Shear Assessment of Reinforced Concrete Solid Slab Bridges” IABMAS 2014, Shanghai, China. Lantsoght, E.O.L., de Boer, A., van der Veen, C. (2014). “Determination of distribution width for shear stresses at support in reinforced concrete slab bridges", Euro-C 2014, Computational Modelling of Concrete and Concrete Structures, St. Anton am Alberg, Austria, pp. 927-936. Lantsoght, E.O.L., van der Veen, C., de Boer, A. (2014). “Predicting the shear capacity of reinforced concrete slabs subjected to concentrated loads close to supports with the Modified Bond Model", IABSE 2014, Engineering for Progress, Nature and People, Madrid, Spain. Lantsoght, E.O.L., van der Veen, C., de Boer, A., (2014). “Practical application of transverse load redistribution in reinforced concrete solid slabs", SMSB 2014, 9th International Conference on Short and Medium Span Bridges, Calgary, Canada, XX pp. (in press)
  6. 6. Lantsoght, E.O.L., van der Veen, C., de Boer, A., (2015). “Reliability-based expression for the shear capacity of reinforced concrete slabs under concentrated loads close to supports”, Safety and Reliability of Complex Engineered Systems, ESREL 2015, Zurich, Switzerland, pp. 4141-4149. Lantsoght, E.O.L., van der Veen, C., de Boer, A., (2015). “Modified Bond Model for shear in slabs under concentrated loads”, Concrete – Innovation and Design, Proceedings of the 2015 fib Symposium, Copenhagen, Denmark, 10 pp. Lantsoght, E.O.L., van der Veen, C., de Boer, A., (2015). “Development of improved expression for the fatigue strength of concrete under compression”, Concrete Repair, Rehabilitation and Retrofitting IV, ICCRRR 2015, Leipzig, Germany, 8 pp. Flores Valverde, K., Lantsoght, E.O.L. (2016). “Analysis of structural condition and proposed maintenance for the bridge over the Tambura ravine”, IABMAS 2016, Foz de Iguacu, Brasil. Lantsoght, E.O.L., van der Veen, C., de Boer, A., (2016). “Shear and Moment Capacity of the Ruytenschildt Bridge”, IABMAS 2016, Foz de Iguacu, Brasil. Lantsoght, E.O.L., van der Veen, C., de Boer, A., (2016). “Shear Capacity of the Ruytenschildt Bridge”, fib 2016, Cape Town, South Africa. Koekkoek, R.T., Lantsoght, E.O.L., Yang, Y., de Boer, A., Hordijk, D.A. (2016). “Defining loading criteria for proof loading of existing reinforced concrete bridges”, fib 2016, Cape Town, South Africa. Lantsoght, E.O.L., Yang, Y., Tersteeg, R.H.D., van der Veen, C., de Boer, A. (2016). “Development of Stop Criteria for proof loading”, IALCCE 2016, Delft, The Netherlands. Lantsoght, E.O.L., de Boer, A., van der Veen, C., (2016). “Modelling of symmetrically and asymmetrically loaded reinforced concrete slabs”, SEMC 2016, Cape Town, South Africa. C. Mejia, E.O.L. Lantsoght (2016). “Strain and deflection analysis in plain concrete beams and reinforced concrete beams by applying Digital Image Correlations”, SEMC 2016, Cape Town, South Africa. D. Valdivieso, E.O.L. Lantsoght, T.A. Sanchez (2016). “Study of the effect of torsion in slabs”, SEMC 2016, Cape Town, South Africa. Lantsoght, E.O.L., van der Veen, C., de Boer, A., Hordijk, D.A. (2017). “Proof load testing of reinforced concrete slab bridges in the Netherlands”, TRB Annual Compendium of papers 2017, Washington DC. Lantsoght, E.O.L., van der Veen, C., de Boer, A., Hordijk, D.A. (2017). “Proof load testing of viaduct de Beek”, IABSE 2017, Vancouver, Canada. (in press) Lantsoght, E.O.L., van der Veen, C., de Boer, A., Hordijk, D.A. (2017). “Recommendations for proof load testing of reinforced concrete slab bridges”, IABSE 2017, Vancouver, Canada. (in press) Lantsoght, E.O.L., van der Veen, C., Hordijk, D.A., de Boer, A. (2017). “Reliability index after proof load testing: viaduct de Beek”, ESREL 2017, Slovenia Lantsoght, E.O.L., van der Veen, C., de Boer, A., Hordijk, D.A. (2017). “Determination of loading protocol and stop criteria for proof loading with beam tests”, fib symposium 2017, Maastricht, the Netherlands. (in press) Lantsoght, E.O.L., van der Veen, C., de Boer, A., Hordijk, D.A. (2017). “Extended Strip Model for slabs subjected to a combination of loads”, fib symposium 2017, Maastricht, the Netherlands. (in press) Technical presentations E.O.L. Lantsoght. (2009) "Shear in reinforced concrete slabs - Shear capacity near simple and continuous supports," 11th Symposium of the Research School Integral Design of Structures, Noordwijkerhout, The Netherlands. E.O.L. Lantsoght. (2010) "Shear in reinforced concrete slabs - Concentrated loads close to supports," PhD lunchmeeting, Delft University of Technology. E.O.L. Lantsoght. (2010) "Afschuiving in betonnen platen met puntlast nabij oplegging - Bespreking eerste testen," Progress meeting, Delft University of Technology. E.O.L. Lantsoght. (2010) "Shear in reinforced concrete slabs - wheel loads close to support," 12th Symposium of the Research School Integral Design of Structures, Zeist, The Netherlands. E.O.L. Lantsoght. (2010), "Afschuiving in betonnen platen - met puntlast nabij oplegging," 78th Stufib meeting, Delft, Países Bajos. E.O.L. Lantsoght. (2011) "Afschuiving in betonnen platen - experimenteel onderzoek." Beëdigingsbijeenkomst Constructeursregister, Delft, Países Bajos. E.O.L. Lantsoght. (2011) "Shear capacity of slabs and slab strips loaded close to the support", ACI Fall Convention, Cincinnati, USA.
  7. 7. E.O.L. Lantsoght. (2012) "Shear capacity of solid slab bridges - Recommendations based on experiments," fib committee SAG 7, Delft, Países Bajos. E.O.L. Lantsoght. (2012). "Afschuifdraagvermogen van gewapende plaatconstructies zonder schuifwapening," Studiedag: Het nieuwe dwarskrachtrekenen aan bestaande betonnen kunstwerken, Rotterdam, Países Bajos. E.O.L Lantsoght. (2012) "Bestaande betonnen bruggen - onderzoek naar restdraagvermogen," 3TU Bouw symposium, Eindhoven, Países Bajos. E.O.L Lantsoght. (2012) "Shear capacity of slabs and slab strips - experimental results," PhD lunchmeeting, Delft University of Technology. E.O.L Lantsoght. (2012) "Quick Scan platen - Achtergrondrapport en MathCad sheet" Progress meeting, Delft University of Technology. E.O.L Lantsoght. (2012) "Afschuifdraagvermogen van platen - plaatbruggen onder verkeersbelasting," meeting, Delft University of Technology. E.O.L Lantsoght. (2012) "Afschuifdraagvermogen van platen - plaatbruggen onder verkeersbelasting," meeting, Rijkswaterstaat, Utrecht, The Netherlands. E.O.L Lantsoght. (2012) "Superposition of loading - Results of Experiments," Progress meeting for International Advisory Board, Schiphol. E.O.L Lantsoght. (2012) "Quick Scans of Solid Slab Bridges," Progress meeting for International Advisory Board, Schiphol. E.O.L Lantsoght. (2012) "Superpositie van belastingen - Experimentele resultaten," meeting, Delft University of Technology. E.O.L Lantsoght. (2012) "Shear Capacity of Existing Reinforced Concrete Slab Bridges under Traffic Loads," International Bridge Conference, Pittsburgh, USA. E.O.L Lantsoght. (2013) "Shear in Reinforced Concrete Slabs under Concentrated Loads close to Supports", Introduction presentation at doctoral defense, Delft University of Technology, The Netherlands. E.O.L. Lantsoght. (2013) "Shear in Reinforced Concrete Slabs under Concentrated Loads close to Supports", lecture for research group Mechanics of Materials and Structures, Vrije Universiteit Brussel, Brussels, Belgica. E.O.L. Lantsoght. (2014) “Vermoeiing van beton onder druk – Literatuuronderzoek & voorstel,” Infraquest, Delft, The Netherlands. E.O.L. Lantsoght. (2015) “Testing to failure of the Ruytenschildt Bridge: Comparison between predicted capacity and test results”, ACI Spring Convention, Kansas City, MO, USA, April 2015. E.O.L. Lantsoght. (2015) “Extending the service life of existing bridges,” I Congreso y Expo de Diseño y Construcción de Estructuras Metálicas y Hormigón, ESPOL, Guayaquil, Ecuador. E.O.L. Lantsoght. (2015) “Extender la vida útil de puentes existentes,” Seminario Internacional – Avances Recientes en Ingenieria Estructural, Quito, Ecuador. E.O.L. Lantsoght. (2015) “Testing to Failure of the Ruytenschildt Bridge – Analysis of the Ultimate Limit State Results.”, Seminario de Investigacion USFQ, Quito, Ecuador. E.O.L. Lantsoght. (2015) “Application of Modified Bond Model to capacity of Ruytenschildt Bridge,” ACI Fall Convention, Recent Developments in Two-way Slabs: Design, Analysis, Construction, and Evaluation, Denver, CO, USA. E.O.L. Lantsoght. (2015) “Improved Formulation for Compressive Fatigue Strength of Concrete,” International Conference on Concrete Repair, Rehabilitation and Renovation IV, Leipzig, Germany. E.O.L. Lantsoght. (2015) “Testing to failure of the Ruytenschildt Bridge: Comparison between predicted capacity and test results”, ACI Spring Convention, Kansas City, MO, USA. E.O.L. Lantsoght. (2015) “Modified Bond Model for shear in slabs under concentrated loads,” fib symposium 2015, Copenhagen, Denmark. E.O.L. Lantsoght. (2015) “Improved formulation for compressive fatigue strength of concrete,” ICCRRR 2015, Leipzig, Germany. E.O.L. Lantsoght. (2015) “Proof loading of existing reinforced concrete bridges in The Netherlands,” ACI Fall Convention, Committee 342: Evaluation of Concrete Bridges and Bridge Elements, Denver, CO, US. E.O.L. Lantsoght. (2015) “Proof loading of existing bridges – Recent developments in The Netherlands,” IV Jornadas de Ingenieria Civil, Escuela Politecnica Nacional, Quito, Ecuador. E.O.L. Lantsoght (2016) “Development of a guideline for load testing in the Netherlands,” ACI Spring Convention, Research in Progress, Milwaukee, WI, USA. E.O.L. Lantsoght (2016) “Afschuifcapaciteit van betonnen plaatbruggen – Plaatproeven en Quick Scan,” TU Delft, June 2016, Delft, The Netherlands. E.O.L. Lantsoght (2016) “Load testing of reinforced concrete bridges in the Netherlands,” MeMC, Vrije Universiteit Brussel, Brussels, Belgium, October 2016.
  8. 8. E.O.L. Lantsoght (2016) “Afschuifcapaciteit van betonnen plaatbruggen – Plaatproeven en Quick Scan,” TU Delft, June 2016. E.O.L. Lantsoght (2016) “Defining loading criteria for proof loading of existing reinforced concrete bridges”, fib symposium, Cape Town, South Africa, November 2016. E.O.L. Lantsoght (2016) “Shear capacity of the Ruytenschildt Bridge”, fib symposium, Cape Town, South Africa, November 2016. E.O.L. Lantsoght (2016) “Development of stop criteria for proof loading”, IALCCE Symposium, Delft, the Netherlands, October 2016. E.O.L. Lantsoght (2016) “Bridging the gap between one-way and two-way shear in slabs,” ACI-fib punching symposium, Philadelphia, PA, USA, October 2016 E.O.L. Lantsoght (2017) “Proof load testing in the Netherlands,” ACI Spring Convention 2017, Committee 437: Strength Evaluation of Existing Concrete Structures, Detroit, MI, USA, March 2017 E.O.L. Lantsoght (2017) “Determination of loading protocol and stop criteria for proof loading with beam tests”, fib symposium 2017, Maastricht, the Netherlands. E.O.L. Lantsoght (2017) “Extended Strip Model for slabs subjected to a combination of loads”, fib symposium 2017, Maastricht, the Netherlands. E.O.L. Lantsoght (2017) “Proof load testing of reinforced concrete slab bridges in the Netherlands”, TRB Annual Meeting, January 2017. E.O.L. Lantsoght (2017) “Pruebas de carga en puentes de hormigon armado: experiencias de un programa de pruebas en Holanda,” 1er congreso Iberamericano de Ingenieria Civil, October 2017, Quito, Ecuador. E.O.L. Lantsoght (2017) “Assessment of slab bridges through proof loading in the Netherlands”, ACI Fall Convention 2017, Anaheim, CA. E.O.L. Lantsoght, on behalf of Y. Yang (207) “On the way to the development of a shear stop criterion with Acoustic Emission measurement”, ACI Fall Convention 2017, Anaheim, CA. Presentations E.O.L. Lantsoght. (2012) "Fifty Shades of Concrete" TEDx Delft Salon, Delft, The Netherlands. E.O.L. Lantsoght. (2014) “El cemento y el hormigon, los materiales mas usados del mundo luego del agua”, USFQ, Quito, Ecuador. E.O.L. Lantsoght. (2014) “Civil Engineering”, Seminario de Ciencias y Ingenieria, USFQ, Quito, Ecuador. E.O.L. Lantsoght. (2015) “Sound applications in engineering,” Charlas de Medicina – El Viaje del Sonido, Quito, Ecuador. E.O.L. Lantsoght. (2015) “Civil Engineering”, Seminario de Ciencias y Ingenieria, USFQ, Quito, Ecuador. E.O.L. Lantsoght. (2015) “The road to breaking bridges and stereotypes,” Foro II, Women in Science and Engineering, Universidad San Francisco de Quito, Quito, Ecuador. E.O.L. Lantsoght. (2016) “Sound applications in engineering,” Coloquio del Politecnico, Quito, Ecuador. E.O.L. Lantsoght. (2016) “The adventures of a concrete researcher – or how I ended up breaking bridges for a living” ACI Student Chapter USFQ, Quito, Ecuador, October 2016 E.O.L. Lantsoght. (2018) “Sound applications in engineering,” Coloquio del Politecnico, March 2018, Quito, Ecuador. Posters E.O.L. Lantsoght. (2012) "Shear Capacity of Existing Reinforced Concrete Slab Bridges under Traffic Loads," International Bridge Conference, Pittsburgh, USA. E.O.L. Lantsoght. (2017) “Beam experiments to investigate loading protocol and stop criteria for load testing”, ACI Spring Convention 2017, ACI 123 poster session Research in Progress, Detroit, MI, USA. E.O.L. Lantsoght. (2017) “Recommendations for proof load testing of reinforced concrete slab bridges”. IABSE 2017, Vancouver, CA.
  9. 9. Service Appointments and Professional Memberships  Committee member of TRB AFF 30: Concrete Bridges of the Transportation Research Board  Committee member of TRB AFF 40: Testing and Evaluation of Transportation Structures of the Transportation Research Board  Member of committee ACI-DAfStB 445-D: Shear Databases of the American Concrete Institute and the Deutscher Ausschuß für Stahlbeton  Associate Member of committee ACI 342: Evaluation of Concrete Bridges and Concrete Bridge Elements of the American Concrete Institute  Member of committee ASCE-ACI 421: Design of Reinforced Concrete Slabs of the American Concrete Institute and the American Society of Civil Engineers  Associate Member of committee ASCE-ACI 445: Shear and Torsion of the American Concrete Institute and the American Society of Civil Engineers  Associate Member of committee ACI 437: Strength Evaluation of Existing Concrete Structures of the American Concrete Institute  Member of the Advisory Group – Full scale testing of Concrete Bridges of Vejdirektoratet Denmark  Guest associate editor for Frontiers in Built Environment – Bridge Engineering Research Topic Diagnostic and Proof Loading Tests on Bridges  Reviewer for Structural Engineering International, technical journal of IABSE, International Association of Bridge and Structural Engineering  Reviewer for Transportation Research Record, technical journal of the Transportation Research Board  Reviewer for the technical journal: Institution of Civil Engineers – Bridge Engineering.  Reviewer for the Special Publications of the American Concrete Institute  Reviewer for the International Journal of Heritage Architecture: Studies, Repairs and Maintenance  Reviewer for Construction & Building Materials  Reviewer for Civil Engineering Infrastructures Journal (University of Tehran)  Reviewer for Structural Concrete, technical journal of fib, the international concrete federation  Reviewer for Structure and Infrastructure Engineering  Reviewer of Revista Politecnica, the journal of the Escuela Politecnica Nacional (Quito, Ecuador)  Reviewer for Sensors  Reviewer for Structures, the journal of the Institution of Structural Engineers  Reviewer for Engineering Fracture Mechanics  Reviewer for Nuclear Engineering and Design  Reviewer for KSCE Journal of Civil Engineering  Reviewer for the Journal of Earthquake Engineering  Reviewer for PLOS One  Reviewer for Multidiscipline Modeling in Materials and Structures  Reviewer for ACI Avances en Ciencias e Ingenierías  Reviewer for Journal of Materials in Civil Engineering (ASCE)  Reviewer for Engineering Structures  Reviewer for Journal of Bridge Engineering (ASCE)  Member of the Scientific Committee for IABSE 2017, Vancouver – conference of the International Association for Bridge and Structural Engineering.  Member of the Scientific Committee for IABMAS 2018, Melbourne – conference of the International Associations for Bridge Maintenance and Safety.  Member of the International Scientific Committee for SHMII-17, Brisbane – Structural Health Monitoring of Intelligent Infrastructure Conference 2017.  Organiser of Mini Symposium MS10: Assessment of structural capacity by proof loading, IALCCE 2016, Delft, the Netherlands  Organiser of Mini Symposium MS1: Load Testing of New and Existing Structures, IALCCE 2018, Ghent, Belgium
  10. 10.  Organiser of Special Session SS18: Bridge Monitoring: techniques and results regarding bridge condition and loading, IABMAS 2018, Melbourne, Australia.  Organizer of ACI Fall Convention 2017 Session “Evaluation of Concrete Bridge Behaviour through Load Testing - International Perspective”, Anaheim, CA, USA  Editor of ACI Special Publication “Evaluation of Concrete Bridge Behaviour through Load Testing - International Perspective”  Member of IABMAS, the International Association for Bridge Maintenance and Safety.  Member of IALCCE, the International Association for Life-Cycle Civil Engineering.  Member of ACI, the American Concrete Institute.  Member of ASCE, the American Society of Civil Engineers.  Member of IABSE, the International Association for Bridge and Structural Engineering.  Member of fib, the International Concrete Federation.  Member of the selection committee for the WISE (Women in Science and Engineering) scholarship at Universidad San Francisco de Quito Awards  BelgoSpace Fellowship 2002  Belgian American Educational Foundation Fellowship 2008 – 2009  Fulbright Fellowship 2008 – 2009  Civil Engineering Highlight 2011 at Delft University of Technology  Excellence in Research, Politecnico, Universidad San Francisco de Quito, 2016 Grants  Chancellor Grant 2015 – 3500 USD. Project: Desarrollo del Modified Bond Model para losas de hormigón estructural  Chancellor Grant 2016 – 3000 USD. Project: Development of Stop Criteria for Proof Load Tests.  PoliGrant 2017 – 4000 USD. Project: Shear Capacity of Steel Fiber Reinforced Concrete.

×