P3 dosing series

249 views

Published on

Published in: Business
0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total views
249
On SlideShare
0
From Embeds
0
Number of Embeds
2
Actions
Shares
0
Downloads
2
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

P3 dosing series

  1. 1. Plunger Dosing Pumps 17 rue Ernest Laval - BP 35 - 92173 Vanves Cedex France PCM Préci-Pompe 17 rue Ernest Laval - BP 35 - 92173 Vanves Cedex France P3 Series Tel (33) 01 41 08 15 15 - Telex 634 129 F - Fax (33) 01 41 08 15 00 Tel (33) 01 41 08 15 15 - Telex 634 129 F - Fax (33) 01 41 08 15 00 Internet: w w w. p c m . e u Email: contact@pcm.eu Internet: w w w. p c m . e u Email: contact@pcm.eu Accessories Plunger Dosing Pumps P3 Series 7 8Characteristics - Maximum flow-rate : 1960 l/h (simplex) - Adjustable from 0 to 100 % 6 4 - Minimum flow-rate : 3 l/h (simplex) - Servo control of stroke length - Maximum pressure : 350 Bar and speed available. - Minimum temperature : -10 oC - Multiplexing. - Maximum temperature : 150 oC - Electric motor drive. 9 - Precision : ± 0.5 % 5 3 10 Flooded suction 2 Suction lift 1- Foot valve / strainer 1 Designed & realised by www.altavox.biz - E-TD0053P3S 04-99 — PCM reserves the right to change this data at all times. This document was printed with toxic-free ink. 2- Suction pulsation damper 6- Injection fitting : calibrated valve 3- Flooded suction kit 7- Flow-meter 4- Pulsation damper 8- PH probe 5- Pressure relief valve 9- Control cabinet 10- Pump with servo-motor and variable speed motor Basic applications - Reagent injection Continuous dosing proportional Physical or chemical parametered dosing to a variable flow in a closed loop by on-line regulation in closed loop - Low and high temperature products - High pressure 8 7 9 - Micro flow-rates 9 6Advantages Of plunger design Of design related to Of PCM POMPES 6 10 experience - Difficult suction tasks • Regular doses. • Simplicity and ruggedness. • A network of skilled techni- - API 675 conformity • Flow accuracy and control. • Positive (spring-loaded) fast cal and sales people ready • High self-priming and reliable valve closure. to advise you on selection - High temperature CIP 1 1 capability. • User safety by safety valve and installation. • High pressure. integrated into pumphead. • Before and after-sales • Built-in emergency spare service. Typical case : Chemical, pharmaceutical Typical case : pH regulation parts. or food preparation Physical or chemical parametered dosing Conditioning by batch regulation in closed loopThe range The PCM range of dosing pumps includes mechanical dia- 8 9 9 phragm dosing pumps, plunger pumps, systems with actuated 10 valves and complete skids of integrated dosing systems. 8 1 1 Load Typical case : Bath neutralization Typical case : Filling jars
  2. 2. Plunger Dosing Pumps P3 SeriesMaterials Performances The max. pressures shown are for Simplex Pumps. Housing Materials For Duplex Pumps, divide this figure by 1.2 and for Triplex by 1.35. The housing is rugged and made of FGL 250 Pumphead Valve Comments Materials : cast iron. The design allows multiplexing. code Plunger Pumphead Packing housing ball seat spring gasket S : stainless steel AISI AISI PTFE AISI AISI AISI AISI PTFE Stainless steel SA : stainless steel, food version according to piston diameter, Drive S 316L 316L + KEVLAR 316L 316L 316L 316L max. pressures between 3,5 and 15 bar The drive systems used are mounted directly SC : stainless steel for abrasive liquids on the housing and feature a motor with IP55 SR : stainless steel with heated dosing unit AISI AISI Viton AISI AISI AISI AISI PTFE Food version stainless steel protection. SA 316L 316L O-ring 316L 316L 316L 316L with AISI 316L lantern ring SL : stainless steel in conformity with API specifications Z : special, on request Code Motor version AISI AISI PTFE AISI AISI Tungsten AISI PTFE Stainless steel SC 316L 316L + KEVLAR 316L 440 carbide 316L for abrasive liquids Max pressure in bar Connec- M Single-phase standard 220 V + Revetox Capacity Speed Flow-rate for 1500 rpm motor Plunger per stroke in in tions Ø in mm cm 3 strokes/min l/h (S) T Three-phase standard multi-voltage AISI AISI PTFE AISI AISI AISI AISI PTFE Stainless steel 0.55 kW(E) 1.1 kW(H) 1.5 kW(K) SR 316L 316L + KEVLAR 316L 316L 316L 316L pumphead with heating jacket 130 1964 - 3 4.5 100 1505 - 3.5 4.5 A Three-phase (EExdIIBT4) 105 260 65 982 2 4.5 G AISI AISI PTFE AISI AISI AISI AISI PTFE Stainless steel 30 466 4.5 1"1/4 E Three-phase increased safety 130 1608 - 3.5 5.7 SL 316L 316L + KEVLAR 316L 316L 316L 316L with AISI 316L female 100 1232 1.5 4 5.7 lantern ring 95 213 65 804 2.5 5.7 F Three-phase standard + clutch brake 30 381 5.7 130 1443 2 6.2 W No motor 100 1105 3 6.2 90 191 65 721 4.5 6.2Overall dimensions 30 342 6.2 Stroke adjustment 130 1140 3 8 100 873 5 8 Manual flow-rate adjustment 80 151 Connections Dimensions (mm) 65 570 6 8 is obtained by a micrometer screw with a Weight (kg) 30 270 8 Plunger 130 922 4 9.5 G vernier graduated as a percentage of the stroke. Ø in mm S, SC A B 100 707 6 9.5 1" Servo adjustment is possible by electric or SA SR C D Approximate 72 122 female SL S SA S SA 65 461 7 9.5 pneumatic servo-motor. 30 219 9.5 1/4 G 3/8 G 130 707 5 13 450 maxi 8 to 28 female male 160 120 20 40 / / 70 100 542 8 13 63 93.5 Consult PCM 65 353 9.5 13 211 A 1/2 G SMS ND 100 30 168 13 36 to 56 female 25 226 214 -13 -7 / / 75 130 558 7 16 B 100 428 12 16 1 G SMS ND C 326 56 73.9 63 to 90 300 322 -50 -61 / / 80 65 279 16 female 51 762 maxi 30 132 16 130 410 10 22 1"1/4 G SMS ND 95 to 105 female 51 350 390 -75 -95 / / 80 48 54.3 100 314 16 22 65 205 22 G 30 97 22 1/2" 130 314 12 28 female Performance diagram 100 240 21 28 42 41.6 (simplex pump) 65 157 28Construction 30 74 28 130 231 18 40 100 177 30 40 36 30.5 P=Bar 65 115 40 350Pumphead 30 55 40The pumphead includes the pumphead housing, 130 140 27 65 300 100 107 48 65a suction valve, a discharge valve and an optio- 28 18.5 65 70 65 250nal safety valve (no available on food version). 30 33 65 130 58 70 157 P3=1960 l/h at 0 barThe valves are of the single-ball type with 200 3 l/h at 350 bars 100 44 118 157spring-loaded return. Construction details are 18 7.6 65 29 157 Ggiven in the table materials. 30 14 157 1/4" 150 130 26 160 350 female 100 20 265 350 100 12 3.4Plunger 65 13 350 30 6 350Construction details are given in the table 50 130 11 180 350materials. Sealing either by o-ring or PTFE 100 9 350 Q=l/h 8 1.5 0packing rings. 65 6 350 500 1000 1500 2000 30 3 350 Exemple de codification P3 1 S 42 T C 13 Series Stroking speed No. of heads Motor power Materials Motor type Plunger Ø
  3. 3. Plunger Dosing Pumps P3 SeriesMaterials Performances The max. pressures shown are for Simplex Pumps. Housing Materials For Duplex Pumps, divide this figure by 1.2 and for Triplex by 1.35. The housing is rugged and made of FGL 250 Pumphead Valve Comments Materials : cast iron. The design allows multiplexing. code Plunger Pumphead Packing housing ball seat spring gasket S : stainless steel AISI AISI PTFE AISI AISI AISI AISI PTFE Stainless steel SA : stainless steel, food version according to piston diameter, Drive S 316L 316L + KEVLAR 316L 316L 316L 316L max. pressures between 3,5 and 15 bar The drive systems used are mounted directly SC : stainless steel for abrasive liquids on the housing and feature a motor with IP55 SR : stainless steel with heated dosing unit AISI AISI Viton AISI AISI AISI AISI PTFE Food version stainless steel protection. SA 316L 316L O-ring 316L 316L 316L 316L with AISI 316L lantern ring SL : stainless steel in conformity with API specifications Z : special, on request Code Motor version AISI AISI PTFE AISI AISI Tungsten AISI PTFE Stainless steel SC 316L 316L + KEVLAR 316L 440 carbide 316L for abrasive liquids Max pressure in bar Connec- M Single-phase standard 220 V + Revetox Capacity Speed Flow-rate for 1500 rpm motor Plunger per stroke in in tions Ø in mm cm 3 strokes/min l/h (S) T Three-phase standard multi-voltage AISI AISI PTFE AISI AISI AISI AISI PTFE Stainless steel 0.55 kW(E) 1.1 kW(H) 1.5 kW(K) SR 316L 316L + KEVLAR 316L 316L 316L 316L pumphead with heating jacket 130 1964 - 3 4.5 100 1505 - 3.5 4.5 A Three-phase (EExdIIBT4) 105 260 65 982 2 4.5 G AISI AISI PTFE AISI AISI AISI AISI PTFE Stainless steel 30 466 4.5 1"1/4 E Three-phase increased safety 130 1608 - 3.5 5.7 SL 316L 316L + KEVLAR 316L 316L 316L 316L with AISI 316L female 100 1232 1.5 4 5.7 lantern ring 95 213 65 804 2.5 5.7 F Three-phase standard + clutch brake 30 381 5.7 130 1443 2 6.2 W No motor 100 1105 3 6.2 90 191 65 721 4.5 6.2Overall dimensions 30 342 6.2 Stroke adjustment 130 1140 3 8 100 873 5 8 Manual flow-rate adjustment 80 151 Connections Dimensions (mm) 65 570 6 8 is obtained by a micrometer screw with a Weight (kg) 30 270 8 Plunger 130 922 4 9.5 G vernier graduated as a percentage of the stroke. Ø in mm S, SC A B 100 707 6 9.5 1" Servo adjustment is possible by electric or SA SR C D Approximate 72 122 female SL S SA S SA 65 461 7 9.5 pneumatic servo-motor. 30 219 9.5 1/4 G 3/8 G 130 707 5 13 450 maxi 8 to 28 female male 160 120 20 40 / / 70 100 542 8 13 63 93.5 Consult PCM 65 353 9.5 13 211 A 1/2 G SMS ND 100 30 168 13 36 to 56 female 25 226 214 -13 -7 / / 75 130 558 7 16 B 100 428 12 16 1 G SMS ND C 326 56 73.9 63 to 90 300 322 -50 -61 / / 80 65 279 16 female 51 762 maxi 30 132 16 130 410 10 22 1"1/4 G SMS ND 95 to 105 female 51 350 390 -75 -95 / / 80 48 54.3 100 314 16 22 65 205 22 G 30 97 22 1/2" 130 314 12 28 female Performance diagram 100 240 21 28 42 41.6 (simplex pump) 65 157 28Construction 30 74 28 130 231 18 40 100 177 30 40 36 30.5 P=Bar 65 115 40 350Pumphead 30 55 40The pumphead includes the pumphead housing, 130 140 27 65 300 100 107 48 65a suction valve, a discharge valve and an optio- 28 18.5 65 70 65 250nal safety valve (no available on food version). 30 33 65 130 58 70 157 P3=1960 l/h at 0 barThe valves are of the single-ball type with 200 3 l/h at 350 bars 100 44 118 157spring-loaded return. Construction details are 18 7.6 65 29 157 Ggiven in the table materials. 30 14 157 1/4" 150 130 26 160 350 female 100 20 265 350 100 12 3.4Plunger 65 13 350 30 6 350Construction details are given in the table 50 130 11 180 350materials. Sealing either by o-ring or PTFE 100 9 350 Q=l/h 8 1.5 0packing rings. 65 6 350 500 1000 1500 2000 30 3 350 Exemple de codification P3 1 S 42 T C 13 Series Stroking speed No. of heads Motor power Materials Motor type Plunger Ø

×