PROTASIS is an engineering company with international presence inthe Energy Sector.A dynamic, flexible and highly competen...
+ PROTASIS as a CONSULTANTBy utilizing leading simulation & analysis software tools, the mostadvanced testing apparatus an...
+ PROTASIS as a SYSTEMS INTEGRATORUsing the most advanced equipment and software tools, we provideturn keys solutions incl...
ACTIVITIES – OVERVIEW           H.V SUBSTATION DESIGN          POWER SYSTEMS STUDIES &                CONSULTING      ELEC...
CONSULTING DEPARTMENT – HV SUBSTATION DESIGNo   Load flow studyo   Short circuit calculationso   Protection Coordination s...
CONSULTING DEPARTMENT – POWER SYSTEM STUDIESo Load flow analysiso Short circuit calculationso Protection Coordination stud...
CONSULTING DEPARTMENT – SIMULATION & ANALYSIS SW TOOLS                      -power flow                      -short circui...
CONSULTING DEPARTMENT – SIMULATION & ANALYSIS SW TOOLS
CONSULTING DEPARTMENT – SIMULATION & ANALYSIS SW TOOLS                       PSS®E                    Dynamic Simulation  ...
CONSULTING DEPARTMENT – FIELD SURVEY & ENGINEERING    POWER QUALITY MEASUREMENTS & STUDIESo    Evaluation of the electrica...
SYSTEMS INTEGRATION DEPARTMENT – PMS & SCADA• Design of SCADA and Advanced Control systems• Development of human – machine...
SYSTEMS INTEGRATION DEPARTMENT - SCADA SW TOOLS                    ZENON ®   Scalable Control System for substation automa...
SYSTEMS INTEGRATION DEPARTMENT – AMR/EDM, AMM SYSTEMS•      Installation of energy meters for MV and LV customers•      De...
SYSTEMS INTEGRATION DEPARTMENT – AMR/EDM SYSTEMS SW TOOLS   ZFA/200-F   – A universal platform for automatic meter reading
POWER SYSTEMS COMMISSIONING – SECONDARY SIDE• Design new or Upgrade existing protection schemes• Relay testing, control te...
POWER SYSTEMS COMMISSIONING – PRIMARY SIDEPOWER TRANSFORMER TESTING• Visual inspection• Oil Examination• Ratio, Resistance...
Combined knowledge of Field Engineering and Consulting Work
Combined knowledge of Field Engineering and Consulting WorkCONTENT :• Maintain Electrical Power System Data Base Updated• ...
SELECTED CUSTOMERS in the OIL & GAS INDUSTRY  ASPROPYRGOS          ELEFSINA        THESSALONIKI    REFINERY           REFI...
SELECTED CUSTOMERS in the OIL & GAS INDUSTRY                 ◊ Testing & Commissioning of relays                 ◊ Power S...
SELECTED CUSTOMERS in the OIL & GAS INDUSTRY                                                             Typical panel ret...
SELECTED CUSTOMERS in the OIL & GAS INDUSTRY         JOPETROL        Zarqa - Jordan                         ◊ Electrical n...
SELECTED CUSTOMERS in the OIL & GAS INDUSTRY                                           British Gas                        ...
SELECTED CUSTOMERS in the OIL & GAS INSDUSTRY                                            ZUEITINA OIL COMPANY             ...
SELECTED CUSTOMERS in the OIL & GAS INSDUSTRY                         ◊ Feasibility studies for the impact of             ...
SELECTED CUSTOMERS in the POWER GENERATION INDUSTRY            ◊ 125 MW & 425 MW COMBINED CYCLE POWER PLANTS            ◊ ...
SELECTED CUSTOMERS in the TRANSMISSION SECTOR                 PUBLIC POWER COMPANY                • Upgrade of Bus Differe...
SELECTED CUSTOMERS in the RAIL WAYS INDUSTRY  TESTS bf ELECTRIFICATION                         Power Quality              ...
SELECTED CUSTOMERS in the TELEMETERING BUSINESS                                Maintenance & Support Contract of the ZFA A...
SELECTED CUSTOMERS in the WIND GENERATION INDUSTRY                                         WIND FARM SCADA                ...
SELECTED CUSTOMERS in the STEEL INDUSTRY     • Power Systems Studies including Load Flow, Short Circuit calculations,     ...
MAJOR CUSTOMERST&D COMPANIES•   PPC TRANSMISSION•   PPC DISTRIBUTION                                                      ...
MEMBERSHIPS
ENGINEERING PERSONNEL                                                                    4            13                  ...
ISO 9001 : 2008             CERTIFICATIONo PROTASIS applies detailed anddocumented procedures for studies,consulting and f...
CREDIT RATING CLASIFICATIONThe “Strongest Companies in Greece” is acommunity of enterprises that are ranked at thehighest ...
Upcoming SlideShare
Loading in …5
×

Protasis Gp 2011 6

928 views

Published on

PROTASIS PROFILE

Published in: Technology, Business
0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total views
928
On SlideShare
0
From Embeds
0
Number of Embeds
20
Actions
Shares
0
Downloads
8
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

Protasis Gp 2011 6

  1. 1. PROTASIS is an engineering company with international presence inthe Energy Sector.A dynamic, flexible and highly competent technical group ofprofessionals, and an ideal partner for electrical power systemsconsulting and systems integration work.
  2. 2. + PROTASIS as a CONSULTANTBy utilizing leading simulation & analysis software tools, the mostadvanced testing apparatus and professional experience in planning,operation & maintenance of electrical networks, we offer completesolutions to power related problems for power generation plants, T&Dutilities, the oil & gas sector and other industrial clients.
  3. 3. + PROTASIS as a SYSTEMS INTEGRATORUsing the most advanced equipment and software tools, we provideturn keys solutions including design, procurement, installation,commissioning and after sales support of electrical protectionequipment (relays), control & automation systems (SCADA & PMS) andenergy metering systems (AMR-EDM, AMM)
  4. 4. ACTIVITIES – OVERVIEW H.V SUBSTATION DESIGN POWER SYSTEMS STUDIES & CONSULTING ELECTRICAL PROTECTION & CONTROL FOR MV / HV NETWORKS PRIMARY & SECONDARY ELECTRICAL TESTING & COMMISSIONING ELECTRICAL AUTOMATION, ADVANCED CONTROL - INTEGRATION IN SCADA & P.M.S AUTOMATIC METER READING & ENERGY DATA MANAGEMENT
  5. 5. CONSULTING DEPARTMENT – HV SUBSTATION DESIGNo Load flow studyo Short circuit calculationso Protection Coordination studyo Grounding System studyo Step and Touch Voltage calculations & measurementso Cable calculations & sizingo Panel engineeringo Electrical protection & meteringo Electrical Control, interlockingo SCADA system designo Equipment specificationso Material Requisitions
  6. 6. CONSULTING DEPARTMENT – POWER SYSTEM STUDIESo Load flow analysiso Short circuit calculationso Protection Coordination studieso Breaker Duty analysiso Dynamic Stability and Load Sheddingo Motor - starting analysiso Reactive compensation – Capacitor placemento Harmonic analysiso Switching studieso EMTP studies
  7. 7. CONSULTING DEPARTMENT – SIMULATION & ANALYSIS SW TOOLS -power flow -short circuit, and -protection coordination
  8. 8. CONSULTING DEPARTMENT – SIMULATION & ANALYSIS SW TOOLS
  9. 9. CONSULTING DEPARTMENT – SIMULATION & ANALYSIS SW TOOLS PSS®E Dynamic Simulation PSS®E is a comprehensive time tested tool for performing -power flow (including optimal power flow), -short circuit, and -transient stability simulation (including long term) of power system networks.
  10. 10. CONSULTING DEPARTMENT – FIELD SURVEY & ENGINEERING POWER QUALITY MEASUREMENTS & STUDIESo Evaluation of the electrical environment of public networks - Medium & Low Voltage: EN50160 - Medium & High Voltage: IEC 61000-3-6/7o Evaluation of the electrical environment of industrial networks - Troubleshooting analysis - Estimation of equipment overloadingo Measurements before and after the installation of new equipment - Capacitors (harmonics: reactor sizing, estimation of switching overvoltage) - Induction motor starting (evaluation of voltage dip, system strength)
  11. 11. SYSTEMS INTEGRATION DEPARTMENT – PMS & SCADA• Design of SCADA and Advanced Control systems• Development of human – machine interface• Installation & commissioning of automation systems• Technical support and assistance during operation
  12. 12. SYSTEMS INTEGRATION DEPARTMENT - SCADA SW TOOLS ZENON ® Scalable Control System for substation automation
  13. 13. SYSTEMS INTEGRATION DEPARTMENT – AMR/EDM, AMM SYSTEMS• Installation of energy meters for MV and LV customers• Design - installation & operation of AMR-EDM centers• Load management and Analysis of load profile• Analysis of electricity bill and tariffs• Data Center for independent AMR-EDM services
  14. 14. SYSTEMS INTEGRATION DEPARTMENT – AMR/EDM SYSTEMS SW TOOLS ZFA/200-F – A universal platform for automatic meter reading
  15. 15. POWER SYSTEMS COMMISSIONING – SECONDARY SIDE• Design new or Upgrade existing protection schemes• Relay testing, control testing, inspection of CT/VT, auxiliary circuits• Installation & commissioning of protection relays, energy meters, monitoring equipment• Protection panel retrofit• Design and implementation of automatic control, interlocking, etc.• Technical support - FSSA
  16. 16. POWER SYSTEMS COMMISSIONING – PRIMARY SIDEPOWER TRANSFORMER TESTING• Visual inspection• Oil Examination• Ratio, Resistance & Continuity of OLTC, Voltage Withstand,• tan δ / cos φ TestingVOLTAGE & CURRENT TRANSFORMER TESTINGVT – Ratio & PolarityVT – Phase & Magnitude ErrorVT – Secondary BurdenVT - Dielectric Withstand (2 KV AC)VT – Circuit ContinuityCT – Ratio, Burden & PolarityCT - Phase & Magnitude ErrorCT – Excitation CurveCT – Winding ResistanceCT - Secondary BurdenCT - Dielectric Withstand (2 KV AC)CT – Circuit Continuity
  17. 17. Combined knowledge of Field Engineering and Consulting Work
  18. 18. Combined knowledge of Field Engineering and Consulting WorkCONTENT :• Maintain Electrical Power System Data Base Updated• Maintain Electrical Power System Simulation Updated• Reviewing Protection Settings, Protection Schemes, Protection Philosophy• Conduct power systems studies (LF, SC, PC, REACC, TS, MS, HA, etc.)• Provide emergency support (fault analysis, contingencies, procurement of new equipment, etc. )• Readiness for site visit, to identify and solve problems• Remote Access to SCADA system for fault analysis, event assessment and maintenance purposes• Periodical testing of protection relays, issuance of Test Certificates• Periodical training to M&O personnelAIM : To support the Operation of the Electrical Power SystemDURATION : Throughout plant’s life cycle
  19. 19. SELECTED CUSTOMERS in the OIL & GAS INDUSTRY ASPROPYRGOS ELEFSINA THESSALONIKI REFINERY REFINERY REFINERY ◊ Electrical network studies (LF, SC, PC, REACC, ST) ◊ Protection Upgrade / refurbishment of protection panels ◊ Protection Auditing (relay testing, auxiliary system, CTs, VTs) ◊ Full Service Maintenance Agreement (FSSA) ◊ ELECTRICAL POWER SYSTEM AUDIT
  20. 20. SELECTED CUSTOMERS in the OIL & GAS INDUSTRY ◊ Testing & Commissioning of relays ◊ Power Systems Studies CCPP KAVALA OIL ◊ Network Modeling ◊ Assessment of the Interconnection Capability to the Grid
  21. 21. SELECTED CUSTOMERS in the OIL & GAS INDUSTRY Typical panel retrofit (Motor Oil refinery – PROTASIS)◊ Electrical network studies (LF, SC, PC, REACC, ST, HARM)◊ Total protection Upgrade / retrofit of 300 protection panels◊ Commissioning of relays◊ Full Service Maintenance Agreement (FSSA)◊ ELECTRICAL POWER SYSTEM AUDIT
  22. 22. SELECTED CUSTOMERS in the OIL & GAS INDUSTRY JOPETROL Zarqa - Jordan ◊ Electrical network simulation & study (LF, SC, PC, ST) ◊ Protection Upgrade study & design ◊ Retrofit of protection cubicles ◊ Load Shedding system ◊ Design and installation of SCADA system ◊ ELECTRICAL POWER SYSTEM AUDIT
  23. 23. SELECTED CUSTOMERS in the OIL & GAS INDUSTRY British Gas Hannibal Gas Treatment Plant Hazdrubal Gas Treatment Plant Sfax - Tunisia ◊ Electrical network simulation and studies (LF, SC, PC) ◊ Protection Upgrade studies & design ◊ Retrofit of > 50 protection cubicles ◊ Installation of an earthing resistor ◊ AS-BUILD drawings ◊ ELECTRICAL POWER SYSTEM AUDIT
  24. 24. SELECTED CUSTOMERS in the OIL & GAS INSDUSTRY ZUEITINA OIL COMPANY LIBYA◊ Electrical network simulation and study (LF, SC, PC) for Concessions 103 A & D◊ Protection Upgrade study & design◊ Retrofit of > 100 protection cubicles◊ Installation of an earthing transformer & resistor◊ AS-BUILD drawings◊ Design and Installation of a SCADA system for both Concessions 103 A & D ELECTRICAL POWER SYSTEM AUDIT Electrical modeling and analysis to identify the causes of tripping incidents at 34,5 KV highlines at SABAH field
  25. 25. SELECTED CUSTOMERS in the OIL & GAS INSDUSTRY ◊ Feasibility studies for the impact of installation of new generation in refineries. ◊ Feasibility studies for the impact of installation of new generation in refineries. ◊ Power systems studies (LF/SC/PC) ◊ Commissioning of protection relays ◊ Commissioning of protection relays ◊ Local panel engineering & drawings verification Feasibility studies for the impact of installation of new generation in oil & gas companies
  26. 26. SELECTED CUSTOMERS in the POWER GENERATION INDUSTRY ◊ 125 MW & 425 MW COMBINED CYCLE POWER PLANTS ◊ Power Systems Studies ◊ Installation & Commissioning of Protection System ◊ Acceptance on behalf of the owners of the electrical power system ◊ AS BUILD Drawings HERON THERMOELECTRIC S.A. & HERON II VIOTIA S.A. ◊ > 5 : GAS & STEAM ELECTRIC POWER PLANTS up to 350 MW ◊ Electrical network simulation & studies (LF, SC, PC, ST) ◊ Protection Upgrade studies & design / Retrofit of protection cubicles ◊ Upgrade of Generator Protection in 13 Steam and Gas Turbine Stations ◊ Upgrade of Generators Synchronization Units in Hydroelectric Plants ◊ Upgrade of Alarm Announciator Units in Hydroelectric Plants
  27. 27. SELECTED CUSTOMERS in the TRANSMISSION SECTOR PUBLIC POWER COMPANY • Upgrade of Bus Differential Protection in 400 kV Substations • Upgrade of T/F Differential Protection in 150 kV Substations • Substation Automation Systems in 150/20 kV substations > 300 Distance Protection relays in 150 kV > 200 Distance Protection relays in 400 kV > 400 Feeder Protection relays in 20 kV
  28. 28. SELECTED CUSTOMERS in the RAIL WAYS INDUSTRY TESTS bf ELECTRIFICATION Power Quality measurements• Simulated Fault technique• Electric measurements (touch & step voltage measurements) during fault conditions• Protection coordination study, relays response during normal and fault operation conditions
  29. 29. SELECTED CUSTOMERS in the TELEMETERING BUSINESS Maintenance & Support Contract of the ZFA Application incl. • System administration • Data Base administration • ZFA administration Independent telemetering services • Development of an AMR EDM Center for 20.000 MV Customers • Installation of 2.500 energy meters • Installation of 10.000 GSM / GPRS modems • Integration of 10.000 meters • Maintenance & Support Contract incl. System / ZFA / DB Administration
  30. 30. SELECTED CUSTOMERS in the WIND GENERATION INDUSTRY WIND FARM SCADA 20 KV CUBICLES SAS - SUBSTATION PROTECTION & AUTOMATION SYSTEM 150 KV SUBSTATIONS CONNECTED TO WIND MILLS • DESIGN & STUDIES • PROTECTION AND AUTOMATION SYSTEM • WIND FARM SCADA SYSTEM 150/20 KV S/S SCADA SUBSTATION CONTROL
  31. 31. SELECTED CUSTOMERS in the STEEL INDUSTRY • Power Systems Studies including Load Flow, Short Circuit calculations, Protection Coordination, Harmonics Penetration • Installation of Power Quality Analyzers
  32. 32. MAJOR CUSTOMERST&D COMPANIES• PPC TRANSMISSION• PPC DISTRIBUTION POWER GENERATION PLANTS• TSO CYPRUS• SEC – Saudi Electric Company • SES of Agios Georgios - PPC• ADWEA – Abu Dhabi Water and Electricity Authority • SES of Agios Dimitrios - PPC• AADC – AL AIN Distribution Company • SES of Meliti - PPC• NEPCO – Jordan Transmission Company • SES of Crete -PPCOIL & GAS INDUSTRY • SES of Rhodes PPC • HERON CCPP – TERNA & GAS DE FRANCE • ELPEDISON CCPP• HELLENIC PETROLEUM - Refineries of Aspropyrgos – Elefsina – Thesaloniki• MOTOR OIL HELLAS – Refinery of Corinth• ENERGEAN OIL & GAS – KAVALA OIL - Off shore Oil Exploration• JORDAN PETROLEUM Refinery EPC CONTRACTORS• BRITISH GAS Hannibal Plant Tunisia• ZUEITINA OIL COMPANY - Libya • BALFOUR BEATY RAILWAYS, Italy • TERNA, Greece • ELLINIKI TECHNODOMIKI, Greece INDUSTRIALS • ELECTROMEC, Greece • TECHNIP, Italy • TURBOMACH, Switcherland • HALIVOURGIKI – STEEL INDUSTRY • AL HUSAM, UAE • HELLENIC STEEL – STEEL INDUSTRY • AL MASHARIQ Co., Saudi Arabia • SIDENOR – STEEL INDUSTRY • SSEM Contractors, Saudi Arabia • ELVAL – ALUMINIUM INDUSTRY • AL GIHAZ, Saudi Arabia • ALOUMINIUM DE GRECE • AL OSAIS, Saudi Arabia • HELLENIC ALUMINIUM INDUSTRY • AL BAPTAIN, Saudi Arabia • AGET – LAFARGE – CEMENT INDUSTRY • PETROLCOMET OIL SERVICES, Libya • KAVALA FERTILIZING INDUSTRY • MAN FERROSTAAL, Libya
  33. 33. MEMBERSHIPS
  34. 34. ENGINEERING PERSONNEL 4 13 5 ENGINEERS WITH BACHELORS DEGREE ENGINEERS WITH MASTERS DEGREE ENGINEERS WITH DOCTORATE DEGREE 7 11 4 POWER SYSTEMS CONSULTING DEPARTMENT SYSTEMS INTEGRATION DEPARTMENT SALES & MARKETING / ADMINISTRATION / QA
  35. 35. ISO 9001 : 2008 CERTIFICATIONo PROTASIS applies detailed anddocumented procedures for studies,consulting and field engineering relatedworko Traceability and Accountability for everydeliverable or action are conditions for highquality resultso Internal auditing for all commercial andengineering activities is a commitment anda prerequisite to ensure maximumcustomer satisfaction
  36. 36. CREDIT RATING CLASIFICATIONThe “Strongest Companies in Greece” is acommunity of enterprises that are ranked at thehighest Rating Scores of ICAP Group. ICAP Groupis recognized by the Bank of Greece as anExternal Credit Assessment Institution and by theEuropean Central Bank as an Accepted RatingTool Source.Only one in ten companies in Greece meet therequired criteria to be included in the communityof Strongest Companies.

×