Terminology & Definitions


Published on

Published in: Business
  • Be the first to comment

  • Be the first to like this

No Downloads
Total views
On SlideShare
From Embeds
Number of Embeds
Embeds 0
No embeds

No notes for slide

Terminology & Definitions

  1. 1. “ Terminology & Definitions”
  2. 2. Common Building Types: Agricultural Pole Barn
  3. 3. Common Building Types: Metal Building
  4. 4. Common Building Types: Mansard
  5. 5. Common Building Types: Flat Roof and Metal
  6. 6. Condition Detail Terms
  7. 7. Condition Detail Terms
  8. 8. Building Condition Details Truss Decking Primary Framing Purlin Girt
  9. 9. Roof Design Types Hip Roof Barrel/Curved Roof Gable Roof Shed/Single Slope Roof
  10. 10. Standing Seam Products <ul><li>Uses : </li></ul><ul><li>Commercial/Industrial/Architectural/Residential </li></ul><ul><li>Typically describes 26 gauge material and thicker metal panels, flashings, and required accessories. </li></ul>
  11. 11. Structural Standing Seam <ul><li>Defined : </li></ul><ul><li>Standing seam roof panel that has enough structural integrity to span over open framing and support all design loads. Typically referred to as water tight roofing panels. </li></ul><ul><li>Examples : EM 200S / EM 175S </li></ul>
  12. 12. Architectural Standing Seam <ul><li>Defined : </li></ul><ul><li>Standing seam roof panel that has to be installed over a solid sheeted roof deck to support all design loads. Typically referred to as water shedding roofing panels. </li></ul><ul><li>Example : EM 150SL </li></ul>
  13. 13. Standing Seam Panel Female Leg Male Leg Flat Pan Striated Pan Pencil Rib Pan Over Lap Leg Under Lap Leg
  14. 14. CI Direct Fasten <ul><li>Defined : </li></ul><ul><li>Corrugated roof or wall panel that has to be installed by piercing the metal panel with fasteners into the open frame or solid deck. Can be installed either vertically or horizontal on wall applications. </li></ul><ul><li>Example : Industry Standard R-Panel </li></ul>
  15. 15. Exposed Direct Fasten Panel Female Leg Purlin Bearing Male Leg Over Lap Leg Non Purlin Bearing Under Lap Leg Major Rib Minor Rib
  16. 16. CI Concealed Fasten <ul><li>Defined : </li></ul><ul><li>Wall, soffit, or interior liner panel that is installed by fastening a concealed return leg of the panel to the open frame or solid deck with fasteners that do not show once additional panels are installed. </li></ul><ul><li>Example : Flush Face Panel </li></ul>
  17. 17. Concealed Direct Fasten Panel Female Leg/ Groove Side Male Leg/ Tongue Side Female Leg Over Lap Leg Male Leg Under Lap Leg Striated or Ribbed Striated or Flat Fastening Slot
  18. 18. Panel Manufacturing Portable: Fixed in Place:
  19. 19. Flashing Manufacturing Typically done in shop and shipped
  20. 20. Product Shipping VS.
  21. 21. Roof Structure Components: Zee – Purlin, Girts, Stringer <ul><li>Flange </li></ul>Web Stiffening Leg
  22. 22. Roof Structure Components: Cee – Girts, Posts, Jambs Web Stiffening Leg Flange
  23. 23. Roof Structure Components: Substrate – Wood or Steel <ul><li>Plywood or OSB </li></ul><ul><li>Metal Decking </li></ul>
  24. 24. Types of Insulation <ul><li>Fiberglass Insulation </li></ul><ul><ul><li>Commonly referred to as “Blanket or Batt” </li></ul></ul><ul><ul><li>Vinyl, Paper, or Foil Backing </li></ul></ul>
  25. 25. Types of Insulation <ul><ul><li>Foam Insulation </li></ul></ul><ul><ul><ul><li>Commonly referred to as “Rigid or Board” </li></ul></ul></ul><ul><ul><ul><li>Polyiso is most common material </li></ul></ul></ul><ul><ul><ul><li>Available with nailable base (OSB) </li></ul></ul></ul>