SlideShare a Scribd company logo
1 of 8
第 17 章  机械设计 CAD 简介 §17.1  概  述 §17.2  机械设计 CAD 中常用的数据处理方法 §17.3  机械零件 CAD 应用举例
17.1  概  述 计算机辅助设计简称 CAD ,是由计算机完成产品设计中的计算、分析、模拟、制图、编织技术文件等工作,由计算机辅助设计人员完成产品的全部设计过程,最后输出满意的设计结果和产品图纸的机械设计方法。 CAD/CAM 是利用计算机系统对产品进行描述,并在计算机内部建立模型的工作过程。 一个完备的 CAD 系统通常由设计计算、图形系统和数据库三部分组成。
17.2  机械设计 CAD 中常用的数据处理方法 1 、数表程序化 在机械设计中,大量的设计参数往往以数表的形式给出,进行设计计算时需根据给定的条件从表格中选择适当的参数。 ,[object Object],[object Object],对于简单表格,可以直接应用数组语句,分别用行或列表示规格和选项。 设计资料的有些表格结构比较复杂,不能简单得用数组描述。
2 、线图程序化 设计资料中以线图形式给出的设计参数不便于在程序中应用。处理时要在误差允许的范围内,根据线图的变化趋势分段找出线图的函数表达式。 ,[object Object],最常用的是将线图转化为公式表示的方法是线性插值法。 ,[object Object],对某些均匀变化的曲线,可以等分线图得横坐标,查出横坐标相应的函数值,按表格形式进行程序化处理。
3 、常用的计算机数据处理方法 ,[object Object],为了使设计结果合理,对某些计算数据必须进行取整处理。设 A 为一实数,取整的表达式为 : A =INT( A ) 应用取整函数后,其结果不大于原实数值。涉及到强度时,可次用如下公式: A =INT( A +1) ,[object Object],A =INT( A +0.5)
[object Object],A =5*INT( A /5+1) ,[object Object],齿轮的模数是标准值,按齿轮齿根弯曲疲劳强度设计公式计算出齿轮模数后,应根据齿轮标准值确定齿轮的模数。 ,[object Object],条件判断语句的结构为: IF < 条件〉 THEN… 一般用两实数差的绝对值小于给定精度值作为判别条件,即: IF ABS( A - B )<1E-10 THEN…
17.3  机械零件 CAD 应用举例 ,[object Object],试编制角接触球轴承内部轴向力 F S 的计算程序 源程序如下: ,[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object]
90  INPUT  “ 接触角  ALFA=”;ALFA 100 IF alfa=15 THEN j=1:goto 150 IF ALFA=25  THEN   j=2:goto 150 120  IF ALFA=40 THEN   j=3:goto 150 130 print “ 接触角不在此范围内”: goto 180 140 rem  计算内部轴向力 150 input “ 径向力 Fr=”;FR 160 fs=sf(2,j) *FR 170 print “ 附加轴向力 FS=”;FS 180 end

More Related Content

Viewers also liked

11biolParasitism
11biolParasitism11biolParasitism
11biolParasitismfcrawford
 
Whatever happened to Progressive Enhancement?
Whatever happened to Progressive Enhancement?Whatever happened to Progressive Enhancement?
Whatever happened to Progressive Enhancement?Cole Henley
 
Designing Agency (19/02/2010)
Designing Agency (19/02/2010)Designing Agency (19/02/2010)
Designing Agency (19/02/2010)Cole Henley
 
Scientists comments on the scientific miracles
Scientists  comments on the scientific miraclesScientists  comments on the scientific miracles
Scientists comments on the scientific miraclesAbdul Bhuyan
 
Eat........But You Will Die
Eat........But You Will DieEat........But You Will Die
Eat........But You Will DieAbdul Bhuyan
 
Miracle of a Digit
Miracle of a DigitMiracle of a Digit
Miracle of a DigitAbdul Bhuyan
 
Arte renacimiento pintura 2010 2011
Arte renacimiento pintura  2010 2011Arte renacimiento pintura  2010 2011
Arte renacimiento pintura 2010 2011luismillanalonso
 
Cambio climatico y conciencia ambiental
Cambio climatico y conciencia ambientalCambio climatico y conciencia ambiental
Cambio climatico y conciencia ambientalcarlota argel
 
Hr 015 物理系進路圖
Hr 015 物理系進路圖Hr 015 物理系進路圖
Hr 015 物理系進路圖handbook
 
QM-030-Six Sigma vs Design for Six Sigma
QM-030-Six Sigma vs Design for Six SigmaQM-030-Six Sigma vs Design for Six Sigma
QM-030-Six Sigma vs Design for Six Sigmahandbook
 
Power point aplicacion interactiva
Power point aplicacion interactivaPower point aplicacion interactiva
Power point aplicacion interactivayovana307
 

Viewers also liked (20)

11biolParasitism
11biolParasitism11biolParasitism
11biolParasitism
 
Whatever happened to Progressive Enhancement?
Whatever happened to Progressive Enhancement?Whatever happened to Progressive Enhancement?
Whatever happened to Progressive Enhancement?
 
香港六合彩
香港六合彩香港六合彩
香港六合彩
 
Designing Agency (19/02/2010)
Designing Agency (19/02/2010)Designing Agency (19/02/2010)
Designing Agency (19/02/2010)
 
Who was he.pps
Who was he.ppsWho was he.pps
Who was he.pps
 
Kemahiran berfikir bahasa melayu
Kemahiran berfikir bahasa melayuKemahiran berfikir bahasa melayu
Kemahiran berfikir bahasa melayu
 
Scientists comments on the scientific miracles
Scientists  comments on the scientific miraclesScientists  comments on the scientific miracles
Scientists comments on the scientific miracles
 
Merry.Christmas
Merry.ChristmasMerry.Christmas
Merry.Christmas
 
Eat........But You Will Die
Eat........But You Will DieEat........But You Will Die
Eat........But You Will Die
 
Miracle of a Digit
Miracle of a DigitMiracle of a Digit
Miracle of a Digit
 
Reglamento de maestro
Reglamento de maestroReglamento de maestro
Reglamento de maestro
 
A navegar,celina
A navegar,celinaA navegar,celina
A navegar,celina
 
Arte renacimiento pintura 2010 2011
Arte renacimiento pintura  2010 2011Arte renacimiento pintura  2010 2011
Arte renacimiento pintura 2010 2011
 
mundos1
mundos1mundos1
mundos1
 
Cambio climatico y conciencia ambiental
Cambio climatico y conciencia ambientalCambio climatico y conciencia ambiental
Cambio climatico y conciencia ambiental
 
Hr 015 物理系進路圖
Hr 015 物理系進路圖Hr 015 物理系進路圖
Hr 015 物理系進路圖
 
QM-030-Six Sigma vs Design for Six Sigma
QM-030-Six Sigma vs Design for Six SigmaQM-030-Six Sigma vs Design for Six Sigma
QM-030-Six Sigma vs Design for Six Sigma
 
Power point aplicacion interactiva
Power point aplicacion interactivaPower point aplicacion interactiva
Power point aplicacion interactiva
 
Manual de rutinas informáticas
Manual de rutinas informáticasManual de rutinas informáticas
Manual de rutinas informáticas
 
8 dieu may_man
8 dieu may_man8 dieu may_man
8 dieu may_man
 

Similar to 香港六合彩

Bro hyper mill-2016-1-tw
Bro hyper mill-2016-1-twBro hyper mill-2016-1-tw
Bro hyper mill-2016-1-twRandy_lee
 
Digital fabrication
Digital fabricationDigital fabrication
Digital fabricationNTUT
 
邦查-3D體驗平台設計與加工
邦查-3D體驗平台設計與加工邦查-3D體驗平台設計與加工
邦查-3D體驗平台設計與加工Jimmy Chang
 
CADdoctor中文DM-崇道
CADdoctor中文DM-崇道CADdoctor中文DM-崇道
CADdoctor中文DM-崇道Bruce Lee
 
強恕高中98學年度第1學期第3次段考 計算機概論(進修部)
強恕高中98學年度第1學期第3次段考 計算機概論(進修部)強恕高中98學年度第1學期第3次段考 計算機概論(進修部)
強恕高中98學年度第1學期第3次段考 計算機概論(進修部)Qiang-Shu High School, Taiwan
 
(1)轉檔pdq基本模組介紹
(1)轉檔pdq基本模組介紹(1)轉檔pdq基本模組介紹
(1)轉檔pdq基本模組介紹Rich Man
 

Similar to 香港六合彩 (6)

Bro hyper mill-2016-1-tw
Bro hyper mill-2016-1-twBro hyper mill-2016-1-tw
Bro hyper mill-2016-1-tw
 
Digital fabrication
Digital fabricationDigital fabrication
Digital fabrication
 
邦查-3D體驗平台設計與加工
邦查-3D體驗平台設計與加工邦查-3D體驗平台設計與加工
邦查-3D體驗平台設計與加工
 
CADdoctor中文DM-崇道
CADdoctor中文DM-崇道CADdoctor中文DM-崇道
CADdoctor中文DM-崇道
 
強恕高中98學年度第1學期第3次段考 計算機概論(進修部)
強恕高中98學年度第1學期第3次段考 計算機概論(進修部)強恕高中98學年度第1學期第3次段考 計算機概論(進修部)
強恕高中98學年度第1學期第3次段考 計算機概論(進修部)
 
(1)轉檔pdq基本模組介紹
(1)轉檔pdq基本模組介紹(1)轉檔pdq基本模組介紹
(1)轉檔pdq基本模組介紹
 

Recently uploaded

SymPy 在微積分上的應用_5.pptx SymPy 在微積分上的應用_5.pptx
SymPy 在微積分上的應用_5.pptx SymPy 在微積分上的應用_5.pptxSymPy 在微積分上的應用_5.pptx SymPy 在微積分上的應用_5.pptx
SymPy 在微積分上的應用_5.pptx SymPy 在微積分上的應用_5.pptxNCU MCL
 
函數微分_習題4.pptx 函數微分_習題4.pptx 函數微分_習題4.pptx
函數微分_習題4.pptx 函數微分_習題4.pptx 函數微分_習題4.pptx函數微分_習題4.pptx 函數微分_習題4.pptx 函數微分_習題4.pptx
函數微分_習題4.pptx 函數微分_習題4.pptx 函數微分_習題4.pptxNCU MCL
 
20161220 - domain-driven design
20161220 - domain-driven design20161220 - domain-driven design
20161220 - domain-driven designJamie (Taka) Wang
 
函數畫圖_習題6.pptx 函數畫圖_習題6.pptx 函數畫圖_習題6.pptx
函數畫圖_習題6.pptx 函數畫圖_習題6.pptx 函數畫圖_習題6.pptx函數畫圖_習題6.pptx 函數畫圖_習題6.pptx 函數畫圖_習題6.pptx
函數畫圖_習題6.pptx 函數畫圖_習題6.pptx 函數畫圖_習題6.pptxNCU MCL
 
函數畫圖_習題7.pptx 函數畫圖_習題7.pptx 函數畫圖_習題7.pptx
函數畫圖_習題7.pptx 函數畫圖_習題7.pptx 函數畫圖_習題7.pptx函數畫圖_習題7.pptx 函數畫圖_習題7.pptx 函數畫圖_習題7.pptx
函數畫圖_習題7.pptx 函數畫圖_習題7.pptx 函數畫圖_習題7.pptxNCU MCL
 
20170104 - transaction_pattern
20170104 - transaction_pattern20170104 - transaction_pattern
20170104 - transaction_patternJamie (Taka) Wang
 
买假和真英国驾驶执照买了假的英国驾照,那跟真的有什么区别吗?买假和真正的澳大利亚驾驶执照【微信qoqoqdqd】
买假和真英国驾驶执照买了假的英国驾照,那跟真的有什么区别吗?买假和真正的澳大利亚驾驶执照【微信qoqoqdqd】买假和真英国驾驶执照买了假的英国驾照,那跟真的有什么区别吗?买假和真正的澳大利亚驾驶执照【微信qoqoqdqd】
买假和真英国驾驶执照买了假的英国驾照,那跟真的有什么区别吗?买假和真正的澳大利亚驾驶执照【微信qoqoqdqd】黑客 接单【TG/微信qoqoqdqd】
 
20211119 - demystified artificial intelligence with NLP
20211119 - demystified artificial intelligence with NLP20211119 - demystified artificial intelligence with NLP
20211119 - demystified artificial intelligence with NLPJamie (Taka) Wang
 
函數畫圖_習題5.pptx 函數畫圖_習題5.pptx 函數畫圖_習題5.pptx
函數畫圖_習題5.pptx 函數畫圖_習題5.pptx 函數畫圖_習題5.pptx函數畫圖_習題5.pptx 函數畫圖_習題5.pptx 函數畫圖_習題5.pptx
函數畫圖_習題5.pptx 函數畫圖_習題5.pptx 函數畫圖_習題5.pptxNCU MCL
 
SymPy 在微積分上的應用_4.pptx SymPy 在微積分上的應用_4.pptx
SymPy 在微積分上的應用_4.pptx SymPy 在微積分上的應用_4.pptxSymPy 在微積分上的應用_4.pptx SymPy 在微積分上的應用_4.pptx
SymPy 在微積分上的應用_4.pptx SymPy 在微積分上的應用_4.pptxNCU MCL
 

Recently uploaded (15)

SymPy 在微積分上的應用_5.pptx SymPy 在微積分上的應用_5.pptx
SymPy 在微積分上的應用_5.pptx SymPy 在微積分上的應用_5.pptxSymPy 在微積分上的應用_5.pptx SymPy 在微積分上的應用_5.pptx
SymPy 在微積分上的應用_5.pptx SymPy 在微積分上的應用_5.pptx
 
函數微分_習題4.pptx 函數微分_習題4.pptx 函數微分_習題4.pptx
函數微分_習題4.pptx 函數微分_習題4.pptx 函數微分_習題4.pptx函數微分_習題4.pptx 函數微分_習題4.pptx 函數微分_習題4.pptx
函數微分_習題4.pptx 函數微分_習題4.pptx 函數微分_習題4.pptx
 
20161027 - edge part2
20161027 - edge part220161027 - edge part2
20161027 - edge part2
 
20161220 - domain-driven design
20161220 - domain-driven design20161220 - domain-driven design
20161220 - domain-driven design
 
Entities in DCPS (DDS)
Entities in DCPS (DDS)Entities in DCPS (DDS)
Entities in DCPS (DDS)
 
函數畫圖_習題6.pptx 函數畫圖_習題6.pptx 函數畫圖_習題6.pptx
函數畫圖_習題6.pptx 函數畫圖_習題6.pptx 函數畫圖_習題6.pptx函數畫圖_習題6.pptx 函數畫圖_習題6.pptx 函數畫圖_習題6.pptx
函數畫圖_習題6.pptx 函數畫圖_習題6.pptx 函數畫圖_習題6.pptx
 
函數畫圖_習題7.pptx 函數畫圖_習題7.pptx 函數畫圖_習題7.pptx
函數畫圖_習題7.pptx 函數畫圖_習題7.pptx 函數畫圖_習題7.pptx函數畫圖_習題7.pptx 函數畫圖_習題7.pptx 函數畫圖_習題7.pptx
函數畫圖_習題7.pptx 函數畫圖_習題7.pptx 函數畫圖_習題7.pptx
 
20200323 - AI Intro
20200323 - AI Intro20200323 - AI Intro
20200323 - AI Intro
 
20170104 - transaction_pattern
20170104 - transaction_pattern20170104 - transaction_pattern
20170104 - transaction_pattern
 
买假和真英国驾驶执照买了假的英国驾照,那跟真的有什么区别吗?买假和真正的澳大利亚驾驶执照【微信qoqoqdqd】
买假和真英国驾驶执照买了假的英国驾照,那跟真的有什么区别吗?买假和真正的澳大利亚驾驶执照【微信qoqoqdqd】买假和真英国驾驶执照买了假的英国驾照,那跟真的有什么区别吗?买假和真正的澳大利亚驾驶执照【微信qoqoqdqd】
买假和真英国驾驶执照买了假的英国驾照,那跟真的有什么区别吗?买假和真正的澳大利亚驾驶执照【微信qoqoqdqd】
 
20211119 - demystified artificial intelligence with NLP
20211119 - demystified artificial intelligence with NLP20211119 - demystified artificial intelligence with NLP
20211119 - demystified artificial intelligence with NLP
 
函數畫圖_習題5.pptx 函數畫圖_習題5.pptx 函數畫圖_習題5.pptx
函數畫圖_習題5.pptx 函數畫圖_習題5.pptx 函數畫圖_習題5.pptx函數畫圖_習題5.pptx 函數畫圖_習題5.pptx 函數畫圖_習題5.pptx
函數畫圖_習題5.pptx 函數畫圖_習題5.pptx 函數畫圖_習題5.pptx
 
20151111 - IoT Sync Up
20151111 - IoT Sync Up20151111 - IoT Sync Up
20151111 - IoT Sync Up
 
SymPy 在微積分上的應用_4.pptx SymPy 在微積分上的應用_4.pptx
SymPy 在微積分上的應用_4.pptx SymPy 在微積分上的應用_4.pptxSymPy 在微積分上的應用_4.pptx SymPy 在微積分上的應用_4.pptx
SymPy 在微積分上的應用_4.pptx SymPy 在微積分上的應用_4.pptx
 
20200226 - AI Overview
20200226 - AI Overview20200226 - AI Overview
20200226 - AI Overview
 

香港六合彩

  • 1. 第 17 章 机械设计 CAD 简介 §17.1 概 述 §17.2 机械设计 CAD 中常用的数据处理方法 §17.3 机械零件 CAD 应用举例
  • 2. 17.1 概 述 计算机辅助设计简称 CAD ,是由计算机完成产品设计中的计算、分析、模拟、制图、编织技术文件等工作,由计算机辅助设计人员完成产品的全部设计过程,最后输出满意的设计结果和产品图纸的机械设计方法。 CAD/CAM 是利用计算机系统对产品进行描述,并在计算机内部建立模型的工作过程。 一个完备的 CAD 系统通常由设计计算、图形系统和数据库三部分组成。
  • 3.
  • 4.
  • 5.
  • 6.
  • 7.
  • 8. 90 INPUT “ 接触角 ALFA=”;ALFA 100 IF alfa=15 THEN j=1:goto 150 IF ALFA=25 THEN j=2:goto 150 120 IF ALFA=40 THEN j=3:goto 150 130 print “ 接触角不在此范围内”: goto 180 140 rem 计算内部轴向力 150 input “ 径向力 Fr=”;FR 160 fs=sf(2,j) *FR 170 print “ 附加轴向力 FS=”;FS 180 end