Fablab diana gogoasa

639 views

Published on

0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total views
639
On SlideShare
0
From Embeds
0
Number of Embeds
3
Actions
Shares
0
Downloads
4
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

Fablab diana gogoasa

  1. 1. Amplifying the flexibility FabLab Gogoasa-Filimon Diana
  2. 2. Material- CardboardThe material that I chose to work with was cardboard. Thismaterial is practical, resistant and you can change the furniturewhen you want because is a recycled material.I chose to work with it on the entire FabLAb, not only on thefurniture, but also for the ceiling and the decorative objects.
  3. 3. ConceptThe idea behind the concept is that FabLAb is a place where everyonehas to be able to learn how to use different machines to build "almostanything". FabLAb is a place where people can meet, talk, work together,exchange information, share experiences and knowledge.FabLab is about movment and change. Is a dynamic space, where peoplecome, create, interact and then leave.So the place have to be able to offer the possibility to be changeddepending on needs.As a reference I used the Flexible Love designed by Chishen Shiu. Hecreated a chair made entirely of recycled cardboard, which can stretch forup to 16 people, and then shrink, almost disappearing when not needed.It expands like an accordion allowing a maximum of flexibility and agreat variety of form. The benches you can create by opening FlexibleLove can be curved or linear, also allowing adaptability to differentenvironments.
  4. 4. Initial design 40 35 laser 1.10 3D printer 1.25 cutter 95 10 65 2.85 60 1.20 60 1.80 60 1.95 10 80 1.50 80 40 1.70 laser cutter 1.60 laser cutter 60 45 1.80 2.00 60 45 1.77 laser cutter 1.60 laser 1.00 cutter 1.00 10 65 2.75 1.00 3.80 1.95 10 3.15 40 1.55 1.10 3D printer laser cutter 35 40 Plan Fablab scale 1:50
  5. 5. Extension laser 3D printer cutter laser cutter laser cutter laser cutter laser cutter 3D printer laser cutter Plan Fablab scale 1:50
  6. 6. Movement 3 4 laser 3D printer cutter laser cutter laser cutter 2 2 laser cutter 1 1 laser cutter 3D printer laser cutter Plan Fablab 3 4 scale 1:50
  7. 7. 10 4. 20 1.60 1. reception area3.002.90 2. machines area 2. 1. 3. 3. exposition zone 4. exposition ceiling 1.20 3.15 10 1.95 4.65 2.90 65 5 40 13.30 10 Section S1 scale 1:50 1.00 70 1. 1.30 1. exposition zone-shelves 2. working area 2.30 2. 3. 3. machines area 80 40 65 2.75 60 1.20 60 60 1.20 60 1.95 10 80 2.00 35 40 40 13.30 40 Section S2 scale 1:50
  8. 8. 3. 60 2. 1.70 3.002.90 1. 1. 1. machines area 2. exposition zone-shelves 3. exposition ceiling 30 50 40 15 1.60 1.60 3.90 1.60 1.60 15 40 11.32 Section S3 scale 1:50 60 1. exposition zone-shelves 20 2. main entrance 2. 3. work office 1. 1. 2.30 3. 40 3.90 2.60 3.90 16 40 10.52 Section S4 scale 1:50
  9. 9. 4.00 50 50 500 50 500 50 500 50 500 50 500 50 500 50 500 50 50 50 50 500 50 5002.35 50 500 50 90 500 50 0.051 Front view-interior of FabLab scale 1:20 Detailed zone 50 50 500 50 500 50 500 50 500 50 500 50 500 50 500 50 50 70 Top view scale 1:20
  10. 10. 700 4.00 200 200 150 150 50 50 500 50 500 50 500 50 500 50 500 50 500 50 500 50 50 340 25 35 30050 50 80 5050 34500 80 80 5050 80 340500 80 50 2.3550 80 340500 80 5050 80 34050050 500.051 0.050 Front view-exterior of FabLab Side view scale 1:20 scale 1:20
  11. 11. 50 50 The horizontal and vertical panels are made 80 25 200 200 50 of 10 pieces of cardboard with a thickness of 50 80 5mm. After the pieces are cut, according to the instructions, they are glued together in 600 340 340 25 35 340 500 order to create a more robust structure. One panel will have a thickness of 5 cm being able 80 80 to sustain the entire shelf but also heavy 25 50 objects like materials for the model, working 50 80 Separation Panel tools, models or books. 340 500 802.35 50 50 80 340 500 80 50 50 80 340 500 80 50 50 50 50 Type 1 Type 2 Vertical Panels scale 1:10 50 50 50 50 50 50 50 50 50 80 340 80 80 340 80 80 340 80 80 340 80 80 340 80 80 340 80 80 340 80 50 200 140700 185 25 Horizontal 150 Panel
  12. 12. Experiencing FabLab-instructions for assembling shelves- Step 1. Assemble all the vertical panels type 1 with an Step 2. Add the second horizontal panel. horizontal one. Step 3. Add the separation panels. Step 4. Continue assembling the shelves with the horizontal and the separation panels Step 5. Add the vertical panels type 2 Step 5. Turn the objects in the corect position Ready to use

×