2. HOW MEZZANINE FLOORS ARE
CONSTRUCTED?
 A Mezzanine floor is either bolted straightforwardly
and associated with the current portal frame of the
structure or are detached (conventional mezzanine)
and can be destroyed sometime in the future and
reconstructed is required. The Mezzanine area
(generally single or two layered) are finished with
balustrade for community areas (shops and retail
outlets) or are fitted with an ordinary twin railed
handrail system for capacity mezzanines.

3. HOW MEZZANINE FLOORS ARE
CONSTRUCTED?
 Mezzanine floors are usually manufactured
from all inclusive beams (principle radiates)
and are associated inside the trap of the bars by
excited C-Section joists. The joists are rushed
to the principle radiates by aroused point
sections called cleats. The auxiliary beams
(joists or purlins) are set at 400mm – 700mm
focuses reliant on the loading requirements.

4. HOW MEZZANINE FLOORS ARE
CONSTRUCTED?
 The mezzanine structure is upheld at the right plan stature by
supporting segments. The help segments are by and large box
segments RHS with square base plates (200-700mm relying
upon load and floor chunk) and top cap plates welded to them.
Base plates are bolted to the concrete structure section with two
through jolts for every segment and top cap plates are bolted to
the widespread segments with 4 jolts. Swagger or cross braces
are utilized for stability / sway for more modest floor regions.
Decking, normally 38mm high thickness floor grade chipboard
board are screw fixed to the joists with self-boring screws
commonly 16 for every board. Handrail is installed for edge
insurance to all uncovered countenances of the mezzanines
structure as security edge assurance. Flight of stairs mixes with
mid or top arrivals complete the mezzanine floor and give
admittance to the mezzanines levels.

5. WHY SHOULD YOU USE A STEEL
MEZZANINE FLOOR?
INCREASE STORAGE
 Mezzanine floors make the best use of the unfilled
overhead space of a warehouse for capacity. They are for
the most part evolved on supports which would hardly
steam the current plan on the floor space. With an
especially infinitesimal impression, they can build the
open additional room in the unit altogether. You can even
choose to add more than one level of mezzanine floors if
your design is enough tall.

6. WHY SHOULD YOU USE A STEEL
MEZZANINE FLOOR?
COORDINATE BETTER
 Now and again, mezzanine flooring is used to segregate
work processes and organize them better using all the
extra room given by them. For example, you could
perhaps use the lower level for putting away-raw materials
and half-finished products while loading the completed
ones in the mezzanine. Generally speaking, the mezzanine
floors have similarly been changed over into a shut office
space that will offer a desert nursery of quiet from the
much of the time noisy shop floor!

7. WHY SHOULD YOU USE A STEEL
MEZZANINE FLOOR?
AVOID REBUILDING/RELOCATION
 Various businesses and assembling units are
constrained to develop or move to various areas for
need of room. With the removal of room constraints
through mezzanine levels, they can stay in
comparative place for quite a while whether or not the
business develops significantly throughout the long
time!

8. WHY SHOULD YOU USE A STEEL
MEZZANINE FLOOR?
SAVE MONEY
 As you see, by building mezzanine floors the business
can get colossal cost rewards. Increased capacity at
inconsequential expense. No altering cost. No
movement cost. A planned work measure makes for a
development in efficiency, in fact provoking expense
investment funds.

9. WHY SHOULD YOU USE A STEEL
MEZZANINE FLOOR?
INCREASE RESALE VALUE
 A glad side benefit of adding a space level to a structure is
the increase in its resale cost. In the event that whenever
you decide to move the business for some other
clarification, you will improve cost for the current design
in view of the region given by the mezzanine floor.

10. THANK
YOU