Successfully reported this slideshow.
We use your LinkedIn profile and activity data to personalize ads and to show you more relevant ads. You can change your ad preferences anytime.

Dvr firmware-update-step-244-2022-v2


Published on

Visit us at for the latest firmware and other information on the Mouse 244-2022 DVR / dash camera.

  • Be the first to comment

  • Be the first to like this

Dvr firmware-update-step-244-2022-v2

  1. 1. Operating Steps Of Mouse Like DVR Firmware Update v2.0Please Notice! Do not update the device when it is normal, because the firmware version not fixed will occur white screen or other problems. Please check your device whether built-in memory card, then choose right firmware to update. These firmware are used for bright screen which didn’t pasted striper to inside of rubber like “S-xxxx”.Step 1:Copy the firmware file “firmware-AD01.bin” (NOT built-in memory card) or“firmware-AD01_2C.bin” (built-in memory card) to a SD card.Step 2:Make sure the device is closed and battery is full, then insert into Step 1 SD card.If not use battery for start device, you can also charging by car charger or USBcharger.Step 3:Start the device, it will find the firmware and give the prompt.Please confirm to update it, and wait it updating, about 10 seconds, when it beupdated, it will give prompt again.Step 4:Take out the SD card, and start the device.Please delete the firmware from SD card, make sure normal use of SD card.