Successfully reported this slideshow.
We use your LinkedIn profile and activity data to personalize ads and to show you more relevant ads. You can change your ad preferences anytime.

Basic process of roofing techniques


Published on

There are many types of roofings are available in the market. Homeowners have to check for the roofing whether it is needed maintenance or reroofing should be done for the are few basic process about roofing.

Published in: Business
  • Be the first to comment

  • Be the first to like this

Basic process of roofing techniques

  1. 1. Basic process of roofing techniques
  2. 2. Roofing materials • We have to understand the basic types of roofing before the homeowner decide to install new roof or repairing old roof in their home. • First we have to understand the roofing materials and what kinds of roof suits for your home. • There are many types of shingles( involved-in-roofing-process/) are available for your home and choose the best shingles that suits your home.
  3. 3. • Asphalt composite shingles: Cheap and easily obtainable, but less attractive than other options due to flat appearance. • Wood Shake: Pricey but attractive shingle. • Metal Roofing: Still rare, and few roofers know how to install it well; special companies are required for this job. • Slate Roofing: Highly attractive, and a high-end roofing option; extremely slippery to walk on. • Rubber Slate or Faux Slate: Recycled post-industrial synthetics gaining in popularity.
  4. 4. Remove shingles or roof over them • The weight issues are the main argument against laying additional layers of asphalt shingles is that the roofing materials can get too heavy for the underlying roof framing. • This can be a structural problem, especially for older houses. It is often said that a triple layer of asphalt shingles is equal to a single layer of slate shingles an exceedingly heavy type of material. • One other problem with shingling over existing shingles is that you are essentially repeating some of the surface irregularities that may already be there.
  5. 5. • Putting new shingles over that doesn’t do much for the aesthetic aspect. • One way to minimize this problem is to go over the old roof and correct as many problems as you can. • It doesn’t take much more than a hammer, some roofing nails, and a handful of shingles to correct the problem of bumps, gaps, and protruding nails. • Re-roofing –( steps-in-reroofing-the-house)Stripping up off the existing layer and then laying down the new layer adds more work to the process.
  6. 6. Best season for roofing • If roofers only wanted for perfect conditions to install a roof, they would go out of business. Extending work seasons helps roofers and consumers alike. • In most parts the optimal roofing season is from late spring to early fall. • Partially installed areas must be perfectly dry before any covering layers are installed.
  7. 7. Basic process in roofing • Remove all existing shingles, deposit them in a roll-off, and remove. • Make minor repairs on roof if in good condition. If not, replace bad wood with plywood, whichever is applicable to your roof. • Install ice dam protection barrier of synthetic materials to prevent backed up ice in the gutters which prevents ice-melt from draining away. • The ice-melt will permeate under the shingles and cause damage to the inside of your house.
  8. 8. • Lay down asphalt paper. • Apply the shingles - starting at the eaves and working upward. • Apply flashing around all areas where leaks might come into the house - against the chimney, stack vents, etc. • Install the ridge vent.
  9. 9. Saving cost • Roofing contractors have a great deal of flexibility to negotiate on the cost on roofing your home. • The roof restoration service ( blog/)has highest professional standard for quality results and workmanship. • They will work according to adhere standards and regulations of roofing.
  10. 10. Contact details Call @ 1300 109 021 Email: Website:
  11. 11. Thank you!!!