Change the back ground to simple.Add two images on the first slide…. Patterns and cell.
Add applications for objective. That is why it is important. Details on slides about overviewDelete some results, like chemistry, roughness and cell alignment, proliferation and whole discussion part
Orange boxes are this presentation’s topic
Schematically show the process and give objective of this study. Title is not proper. Preparing sample?
Show the film thicknesses, feature size and shapes.
Picture of sputtering system, process parameters onto slide…..
Finish defining constants and symbols used in equations.Get rid of mean and standard deviation. Just say that you measured six times.
Look up papers on film thickness and stress… should we be seeing this?Overall, there’s no common agreement on trend between film thickness and residual stress.In Brennan’s study, film thickness ranges from 0.79 um to 2.54 um. The results show that residual stress decreases with increasing film thickness. However, the differences are not distinguished In another study, where the thickness was range from 36.5 nm to 84.5 nm, it is really hard to tell the trend in stress changing with film thickness.  Possible mechanism:roughness and tensile stress; rougher surfaces generate higher tensile stress due to the propensity for in-plane contact between neighboring grain surfaces. Doljack and Hoffman considered the stress developed when newly deposited grains are attracted to one another during deposition, causing grain coalescence or “zipping” of the grain boundaries. I haven't written them in the article as more tests are needed to investigate exact mechanism behind the results. S. Brennan, ect. X-ray measurements of the depth dependence of stress in gold films. Physica B. 2000, pp. 125-129. GregerThornell, ect. Residual stress in sputtered gold films on quarts measured by the cantilever beam deflection technique. IEEE transactions on ultrasonics, perroelectrus, and frequency control, 1999, Vol. 46, No.4
Put instrument that you used to determine the film roughness. Also how you did the measurements.
InsertaFM slide… how it works and how you will use it (tapping and contact mode)