2013 IEEE eee hard ware projects

6,854 views

Published on

Published in: Technology, Business
0 Comments
1 Like
Statistics
Notes
  • Be the first to comment

No Downloads
Views
Total views
6,854
On SlideShare
0
From Embeds
0
Number of Embeds
1
Actions
Shares
0
Downloads
87
Comments
0
Likes
1
Embeds 0
No embeds

No notes for slide

2013 IEEE eee hard ware projects

  1. 1.     Academic Projects for EEE (embedded) (2013-2014)       We will develop your ideas and your papers also, For any Further information call-9603150547 e-mail visionsolutions.9@gmail.com                
  2. 2.   EEE PROJECTS Project code Title of the Project Description IEEE & JOURNAL BASED PROJECTS IJEE01 Distribution Transformer Monitoring Using GSM Technology In this we will monitor transformer parameters like current, voltage and temperature, if any of these parameters found abnormal then this systems sends SMS alert to user. IJEE02 Prepaid Energy Meter with GSM technology the GSM technology is used so that the consumer would receive messages about the consumption of power (in watts) and if it reaches the minimum amount, it would automatically alert the consumer to recharge IJEE03 Bluetooth remote home automation system using android application With this we can control home appliances from our android phone. This safe and secure IJEE04 Substation monitoring and controlling using GSM Substation parameters are monitored and it also send alert message when these parameters are abnormal IJEE05 Low cost wireless sensor network in field operation monitoring of ac motor IJEE06 Applied research of the intelligent temperature-controlled speed adjustable motor in radiator fan Cost
  3. 3.   IJEE07 Electronic energy meter with instant billing IJEE08 Remote power on/off control and current measurement for home electric outlets based on a low-power embedded board and ZIGBEE IJEE09 Energy saving project for heating system with ZigBee wireless control network IJEE10 Implementation of ZIGBEE-GSM based home security monitoring and remote control system IJEE11 Automation of residential electricity cut off using network based embedded controller IJEE12 Design of intelligent streetlight monitoring system based on micro controller IJEE13 GSM-based wireless home appliances monitoring & control system IJEE14 Real-Time Atomization Of Agricultural Environment for
  4. 4.   Social Modernization of Indian Agricultural System IJEE15 Method of Measuring Power Quality and Development of Monitor Device IJEE A novel technique of ac power control using micro controller based inverter PROJECTS BASED ON POWER ELECTRONICS PE01 Design of controlled DC voltage regulator using semi converter PE02 Design of controlled DC voltage regulator using full wave converter PE03 Industrial battery charger by thysitor firing angle control PE04 Dual converter using thyristors PE05 Single phase H-bridge inverter with PWM technology using microcontroller PE06 Single phase sine wave PWM H-bridge
  5. 5.   inverter using micro controller PE07 SPWM space vector pulse width modulation PE08 Step down cyclo converter using dual converter SCR bridge PE09 speed control of dc motor by using 8051 PE10 speed control of dc motor using four quadrant chopper PE11 speed control of universal motor using IGBT PE12 speed control of induction motor using voltage control PE13 speed control of induction motor using frequency control PE14 speed control of induction motor using v/f control PE15 H-Bridge and PWM based DC Motor direction and speed control system PE16 Transformer less Variable Frequency
  6. 6.   Drive PROJECTS BASED ON POWER SYSTEMS PS01 Substation monitoring system (measurement of PF, voltage, current, temp.)   PS02 Transmission line multiple fault indication to substation  PS03 Automatic power factor correction using switching capacitors  PS04 Automatic power factor correction using static var compensators  PS05 Transformer oil  temperature monitoring  with automatic Circuit  Breaker operation. 
  7. 7.   PS06 Design and construction of Earth fault relay for single phase power system  PS07 energy tapping identifier  PS08 Unbalanced three phase optimal power flow for smart grids   PS09 Automatic change over for three phase connection with data logger   PS10 Automatic switching of consumer connection in distribution feeder for different load  distribution  PS11 Single phasing preventer for protection of three phase (3-ph) loads  PS12 Microcontroller based Three Phase Load safety implementation with phase fault detector  PS13 Method of Measuring Power Quality and Development of Monitor Device 
  8. 8.   PS14 An On-line Monitoring System of Transmission Line Conductor  PS15 Over voltage or under voltage tripping mechanism  PS16 Three phase fault analysis with auto reset on temporary fault and permanent trip other wise  PS17 Auto selection of any available phase in 3 phase supply system  PROJECTS BASED ON RENEWABLE ENERGY SOURCES SL01 Solar based sinusoidal PWM inverter design using H-bridge SL02 Solar pv cell tracking system for obtaining maximum power output SL03 Solar based irrigation pumping system SL04 Solar based LED street light system with time controlled and auto
  9. 9.   dimming based on ambient light SL05 Solar based traffic light control system SL06 Wireless motor starter with acknowledgement using solar energy for agricultural application PROJECTS BASED ON DIFFERENT APPLICATIONS AS01 Smart Remote for controlling electrical appliance through android mobile. With this we can control any electrical appliances 6500/with our android phone, no need of another including remote .It is safe and secure also. Bluetooth module. AS02 Virtual nurseWith this the patient can easily control his wheel controlling wheel chair chair through simple and smart touching of through android android mobile mobile 6000/including Bluetooth module and normal robot as wheel chair (extra charge for different wheel chair arrangements) AS07 Smart Home/office automation through android mobile. With this we can control any electrical appliances in home or office or industry with our android phone, no need of another remote .It is safe and secure also. 6500/including Bluetooth module AS09 Smart regulator for controlling fan speed through Android mobile. With this we can control speed of fan or AC from our android mobile. 6300/including Bluetooth module.
  10. 10.   AS10 AC motor speed controller through Android mobile. With this we can control speed of AC motor from our android mobile 6750/including Bluetooth module and AC motor. AS11 Advanced street light controlling system through smart phone. In this we can control street light from anywhere through smart phone. 6200/- Industry/home/office automation through smart phone. With this project we can control any electrical appliances of office or home or industry from anywhere by using Smart phone. 6000/- Industrial parameters monitoring system through Smartphone We can monitor different parameters like temperature, voltage, etc through online using smart phone from anywhere 6500/- Home /office/industry electrical appliances controlling by phone call and confirmation through voice feedback. In this we will switch off and switch on any electrical appliances just by calling to this system and press some buttons using DTMF technology. This system also sends voice feedback of device status that is whether device is on or off. VP12 Substation monitoring and controlling system with voice alerts. This system monitor the different parameters of substation like voltage, current and temperature and gives respective voice alerts when something goes abnormal condition and takes necessary action. FS01 Standalone data logger in SD/MMC card with time stamp for industrial applications. In this we will monitor and store different parameters in industry like temperature, voltage, etc .We will store these parameters values in SD 6000/card along with measured time and date also. The stored data format will be in .txt file or excel format so that we can go through entire monthly data using system. FS05 Advanced embedded system based a As we know to save our world we have to reduce usage of paper. This project helps in eliminate AS13 AS14 VP08 With ARM7 With ARM7 With ARM7 6000/- 6000/- 6000/-
  11. 11.   paperless feedback system for colleges and event management systems papers used in feedback systems. In this the feedback and suggestions should be entered from key board and this data will be stored in memory card in a file format using ARM7 micro controller. ET01 Industry parameters monitoring and controlling system based on embedded web server. In this we will monitor industry parameters like 6500/current, voltage, temperature, etc through online using internet from anywhere in the world and we can also control electrical appliances from internet. ET03 Zigbee and internet based advanced street light controlling system. With the help of internet and Zigbee technology we can reduce man power in street light controlling process. We can control street lights from online itself. 6500/- ET05 Internet based home/office automation. With this system we can control any electrical appliances of home or office from anywhere in the world using internet. 6000/- EE01 Wireless Scrutinizer for Detecting the fault in Power System. We take a 230v supply voltage and measure the 6250/current in it. Fault condition is created by using bulbs. We measure the input and output current of the load using 2 ct's. When the bulb is on we assume fault is created and it is indicated in another section using rf. EE02 Wireless load measuring meter for power line. The power in the transmission line is calculated by measuring voltage, current, power factor, and this is indicated in the display by sending the data wirelessly. 6500/- Up-to-date Recording System of Power Line Losses. The power loss in the transmission line is calculated by measuring the voltage drop in the line. The voltage drop is created by using a resistor and an inductor. 6800/- Underground cable fault identification. The objective of this project is to determine the distance of underground cable fault from base station in kilometers EE03 EE06 . 6900/-
  12. 12.   EE05 Two quadrant chopper drive for DC motor speed control. This can be done for small dc motor as well for big (around half hp) motors also depends upon motor availability. 6600/with small dc motor EE06 Wireless motor starter with acknowledgement using solar energy for agricultural application This system sends a message to user when power comes an also sends information whenever power is absent. This system works with solar energy 6500/including GSM and solar EE07 Four quadrant chopper drive for DC motor speed control This can be done for small dc motor as well for big (around half hp) motors also depends upon motor availability 6800/with small motor EE08 design of closed loop controlled DC voltage regulator using full wave semi- converter the 230v ac is converted in to dc using SCRs and the output voltage is measured by the ADC and the firing angle of the SCRs is controlled by the microcontroller only 2 SCRs and 2 diodes will be there is converting circuit 6750/- EE09 Automatic power factor correction using switching capacitors. The power factor is measured by using zero crossing detectors and it is corrected by connecting the capacitors using TRIACs or relays. 6200/- EE10 Automatic power factor correction using static VAR compensators. The power factor is measured by using zero crossing detectors and it is corrected by connecting a single capacitor of larger value using TRIAC and by controlling the firing angle. 6000/- EE11 Design of closed loop controlled DC voltage regulator using full wave converter. The 230v ac is converted in to dc using SCRs and the output voltage is measured by the ADC and the firing angle of the SCRs is controlled by the microcontroller only 4 SCRs will be there in converting circuit. 6000/- EE12 Three phase load protector with automatic fault indication using micro Whenever a three phase fault is occurred it will be indicated by using OP-AMPS and by measuring voltages and currents. And the type of 6000/-
  13. 13.   processor. fault is indicated in the display. EE13 Thyristor based soft starter. The advantage of these starters is the starting current can be controlled to a much lower values than that of the value achieved with the traditional starters. 6500/- EE14 Thyristor based star/delta starter. 6 bulbs are used to represent the motor. There are connected to form into 3 pairs with 2 each connected in series. They are connected in star first then in delta to the three phase supply. 6000/- EE15 Unbalanced Threephase Optimal Power Flow for Smart Grids. Whenever a three phase load is unbalanced it will correct the load by switching some of the single phase loads to the other phases. EE16 Maximum Demand Controller for Industries. This system automatically switches off the low priority appliances whenever maximum load power reached. 6750/- EE17 Automatic Switching of consumer connection in distribution feeder for efficient load distribution Whenever a three phase load is unbalanced it will correct the load by switching some of the single phase loads to the other phases. 6000/- EE18 Distribution grid transformers monitoring using GSM with forced cooling control system The data at the distribution transformer is observed using GSM and if there is any fault it will on the cooling fans. If the fault is on current then it will switch off the transformer 6750/including GSM EE19 Remote substation monitoring system using bidirectional power line communication. With the same 230 v power line we can monitor substation parameters. Around 9000 to 10,000/(modules are not ready) EE20 Design of closed loop controlled DC voltage regulator using full the 230v ac is converted in to dc using SCR's and the output voltage is measured by the ADC and the firing angle of the SCRs is controlled by the 6500/- 6000/-
  14. 14.   wave converter through computer. microcontroller only 2 SCRs and 2 diodes will be there is converting circuit. The required output voltage is set by using hyper terminal. EE21 Design of closed loop controlled ac voltage regulator using TRIAC. Same as the speed control of ac motor but here output voltage is measured using ADC. EE22 Transmission line Voltage and current faults are detected using multiple faults differential protection scheme and the type of the detection and fault is transmitted using RF. indication to electricity board. 6500/- EE23 Power theft identification system in distribution lines using differential power measurement. Current at both the ends of transmission line are measured using CTs and if there is a difference in those currents it means power was theft. 6000/- EE24 Automatic transformer shunt and series parameter calculation from open circuit and short circuit test reading. The OC and SC test readings of the transformer are given through keypad and microcontroller will do calculation and give the output on the LCD. 6750/- EE25 Closed loop dc motor speed control. In this we will control the speed of dc motor and we also take the feedback from the motor and correct the speed level to desired level. 6750/- EE26 Design of cyclo converter using micro controller. The input supply frequency is about 50 Hz. We can get the multiples of 50hz using the SCRs. controller will generate pulses for 4 SCRs and the output frequency of the sine wave is controlled. 6800/- EE27 Reverse power protection for generator. The phase angle of the current and voltage are measured to measure whether the power is in reverse direction of not if the power is in reverse 6750/- 6000 with bulb as motor.
  15. 15.   direction then it will switch of the supply. EE28 Automatic transformer protection using numerical relay. Difference in currents of the two current transformers' will give a buzzer sound. 6750/- EE29 Automatic phase sequence corrector. Whenever the RYB phase sequence is changed it will be corrected by using relays. 6200/- EE30 Design of earth fault relay. Whenever there is an internal fault or the earth 6750/fault then we can sense that by measuring the magnitude of the current and this will give type of the fault. EE31 Reactive power compensation using STACOM. The power factor is measured by using zero crossing detectors and it is corrected by connecting a single capacitor of larger value using TRIAC and by controlling the firing angle. 3000/- EE32 Speed control of universal motor using IGBT. This will be same as the speed control of the ac motor using TRIAC but only difference is IGBT is used to vary the voltage and we will control the dc voltage. First we will convert the 230v ac into dc and then we will control. 6200/including motor EE33 Efficient power saver for street lights using LDR, RTC, LEDs light with solar power This project saves more power that is being 6500 wasted in present street light switching. In this we will consider time and sunlight intensity and we use LED lights and solar power EE34 Agricultural motor controlling with motor safety and water level indicator using GSM. The former can control his field motor without need of going to his field just by sending message. This system also provides safety motor from over heat, low phase power and water level indication. EE35 Automatic changeover for 3 phases connections with data logger. Whenever a three phase load is unbalanced it will correct the load by switching some of the single phase loads to the other phases. EE36 Solar Tracking system for Maximum power In this the panel will give maximum power by Depends upon changing its direction according to sun light Mechanical 6000/including GSM 6800/-
  16. 16.   output with real time power monitoring system. direction. EE37 Voice guider and medicine reminder for patients and old age persons. In this the user will be given one remote (IR or 6750/- with RF RF or ZIGBEE), he has to press any button to get what service he wants and that is played from voice IC so that any person can hear it and come to the user. Another feature of this project is to remind the user for medicines. EE38 Broken conductor detection for overhead lines. The broken conductor can be sensed by using the voltage drop in the line. We will give three switches to indicate broken condition when the switch is operated it will indicate which switch is operated in terms of kilometers. 6000/- EE39 Intelligent shopping trolley using RFID With this we can save billing time and instantaneously the rate and expiry date of the product will be displayed so that we can do the shopping within our budget. 6500 with RFID and 8 tags EE40 Elegant home with power saving, security, safety, remote controlling and auto control of water tank motor In this we will provide multi features to home like 6000/remote controlling of home appliances ,auto controlling of lights depends upon sunlight and auto controlling of water tank motor when tank is full and alert the user when intruders come or when gas leakage or fire accident occurs EE41 Intelligent train engine to avoid accidents and controlling railway gate automatically In this we will control the train by monitoring the 6000/driver’s position or activeness and the gate will b e controlled automatically when train is near the gate. EE42 Design And Development Of Prepaid Energy Meter With Serial Data In this we have one smart card which contains 6500/number units depends upon the amount we will smart pay. These units will be given to energy meter reader system to activate and it will supply power to arrangement and size of It can be done with two motors arrangement or solar panel single motor arrangement (2500 to 6000) with card
  17. 17.   Transmission home till that units are consumed and we have recharge same card again. EE43 Protection And Control Of Low Voltage Motors Used In Industrial Applications. The motor will be protected from over voltage, current, temperature and ground fault conditions. 6000/- (with This system immediately switches off the motor whenever abnormal condition occurs and intimate RF and motor) to control room through RF communication. EE44 Flexible load sharing of transformer with GSM SMS It continuously measure the load current and it shares this load with another transformer when the load is more and send an alert through message. The user can also share directly whenever he wants just by sending message 6500/- EE45 Agriculture field motor control system using GSM Motors in the field are controlled with the help of predefined SMS. 3000/- EE46 Industrial Electrical Devices Control System By this project, we can control the devices in the industries by sending predefined SMS to the controlling unit. 6000/- EE47 GSM based DC Motor Speed and Direction Control The speed and direction of DC motor can be controlled by sending predefined SMS to the system EE48 Cell Phone based Street Light Controlling System with light failure indication system. The on and off controls of the street lights can be done using GSM technology. If any light does not 6700/-with work then that information is sent as message to GSM electricity department. EE49 Temperature Measurement over GSM Mobile Temperature sensor is used to measure the temperature in a particular room and this measured value is sent through GSM to the user mobile. 3000/-with GSM Password protected GSM based Device control. Controlling the devices from remote places only by authorized persons. 6000/-with GSM EE50 6000/-
  18. 18.   EE51 Fingerprint based Access Control system Security is provided in restricted areas using fingerprint technology. The persons are asked to give their fingerprint and the system compares this fingerprint with the already stored information in the system and only allows into if it is an authorized one. 6000/-with Finger print module EE52 Finger print based elevator (lift) operating system. Only authorized persons are allowed to access the lift controls. 6000/- EE53 Low Cost Wireless Sensor Network In Field Operation Monitoring Of AC Motor. The motor will be protected from over voltage, 3500 with RF current, temperature and ground fault conditions. This system immediately switches off the motor 5000 with whenever abnormal condition occurs and intimate Zigbee to control room through RF communication. EE54 A Zigbee Smart Energy Meter Implementation For Energy Efficient Buildings. In This system one control system collects the data from different meters in the building and we can control the appliances of each floor through this control system. Development of a smart power meter for AMI based Zigbee communication Advanced Metering Infrastructure (AMI). This will be useful in heavy apartment’s .individual meters data will be collected and maintained by main system .this main system sends collated data to electricity board. Remote Power On/Off Control And Current Measurement For Home Electric Outlets Based On A LowPower Embedded Board And Zigbee We can control the home appliances through Zigbee remote and this system will display the power consumed by the loads. EE55 EE56 7000/- 3000 without modules 7500 with module And 2500 per each extra meter 2750 without modules 5750 with module
  19. 19.   Communication EE57 EE58 EE59 EE60 EE61 Remote-Controllable and Energy-Saving Room Architecture Based on Zigbee Communication. In this we can control the loads through Zigbee remote or they will also be controlled automatically to save the power. 3000 without modules Applications of Short Industrial devices are monitored and controlled Range Technologies to using Zigbee Technology. Industrial Automation: A Zigbee Approach. 2750 without modules System for Measuring This system measures the power from each home Power Parameters with and sends to central system which is useful in Zigbee Connectivity. apartments. 3000 without modules Wireless Data Encryption and Decryption Using ZigBee Which used in security applications 2750 without modules ZigBee Based Automated Irrigation System. Using ZigBee this system controls the irrigation system automatically. 6000 module 5750 module 6000 module with with with 5750 with module 2750 without modules 5750 module EE62 Bluetooth Robot with We can control this robot through Bluetooth from CMOS image PC and the video sent by robot can be seen in TV sensor(SPY ROBOT) or PC 7000/- EE63 Remote controlled With this we can control home appliances like home automation lights, fan, motor, etc through Bluetooth. This is using Bluetooth safe and secured. 6500/- EE64 Bluetooth based This project measures different parameters in industrial data industry like voltage, current and temperature and acquisition system transmit this data to PC continuously through 6000/- with
  20. 20.   Bluetooth. EE65 Industrial devices With this we can control industry appliances like controlling system machines and motors through Bluetooth. This is using Bluetooth safe and secured. 6000/- EE66 Intelligent electricity This system receives the units consumed from billing system using various meters and generates the bill accordingly. Bluetooth This saves the cost, time and manpower. 6000/- EE67 Touch screen based smart home automation We can control the home appliance just by smart touch 2000 without modules Electrical parameters data logger In this we will continuously measure and display electrical parameters like voltage, current, frequency and temperature EE68 4000 with touch screen and 5000 with RF and touch screen 6000/- EE69 Smart horn for This system reduces the sound pollution that is vehicles with alcohol generated by unnecessary use of horn. This detection for drivers controls the horn intensity depends upon vehicle distance and also gives the special sound when object is detected at back side if vehicle moves backside and this system only allows for driving if driver does not consume alcohol 6250/- EE70 Smart blind stick with This stick gives different sound intensity depends ultra sonic sensor. upon the object distance from person or we can play some voice also depends upon distance. 6000/- EE71 PIR sensor based This project is used to save the power in power saver for conference halls and in auditoriums. When there auditorium and are no persons in the hall ,then lights and fans 6300/-
  21. 21.   conference halls. will be switched off automatically EE72 Intelligent security and This project detects fire accidents, gas leakages 6500/safety system for and also alert through SMS when main door is colleges and industries closed without closing any other room entrance or if any other door is opened without opening main door EE73 An Efficient Monitoring Of Substations Using Microcontroller Based Monitoring System using RF This system monitors the subsystem to provide safety and intimate to control room through RF 6500/- EE74 Wireless Power Grid Controller RF based industrial Automation System With this we can control the power grid through PC using RF communication The industrial loads like motors, coolers, etc are monitored and controlled by a RF remote. 6000/- EE76 DC motor speed and direction control using RF In this project we can control speed and direction of DC motor depending on the requirement using 6500/RF signals EE77 Wireless Stepper motor control using RF The stepper motor direction can be controlled using RF communication. 6500/- EE78 Power Management The various appliances in the hotels are System in Hotels using controlled by giving commands from the PC. PC. 6000/- EE79 PC based Hi-tech We can control the home appliances just by Home Implementation. sitting in front of PC. 6000/- EE80 Industrial Automation using PC. 6000/- EE75 The industrial appliances are controlled by the commands issued from the PC. The controlling unit receives these commands from the PC and 6500/-
  22. 22.   controls the devices according to the commands. EE81 Industrial electrical appliances control using IR. To reduce the manpower for controlling the devices we are implementing this project. Here we will be controlling devices by using a general TV REMOTE. 6000/- EE82 DC motor speed and direction control using IR. A DC motor is controlled using wireless communication. In this project we can control the speed of the dc motor and its direction. 6000/- EE83 Stepper motor control using IR The direction of the stepper motor can be controlled using an IR remote. 6200/- EE84 Automatic Room light controller with visitor counter using IR. This project displays the number of persons present in the room and controls the light according to the intensity of daylight. 6000/- EE85 Auditorium Controlling System The lights and fans in auditorium are controlled by IR remote. 6000/- EE86 Shopping Malls Security and Power Management System using IR The design of security and the method of consuming the power in the shopping malls are carried out in this project. 6000/- EE87 AC motor speed control using TRIAC The speed of AC motor can be varied rapidly on and off by TRIAC. 6000/- EE88 Phase Sequence Indicator and Controlling System. The controlling unit continuously whether 3phase is coming from the line or not so as to run the motors which run only with 3-phase. If 3phase is not coming, the controlling unit automatically shuts down the system. 6000/- EE89 Boiler Monitoring and Control System. The temperature is measured and controlled for the industrial boilers. 6000/-
  23. 23.   Involuntary Industrial Power Scheduler using Embedded System. Power Saver for Advertisement Hoardings using RTC. The power management in the industries can be done effectively using this project. 6800/- This system switches on the lights only at preprogrammed timings using RTC thus saving the power up to the maximum extent. 6800/- EE92 Solar Tracker for acquiring maximum power. The project aims at designing a system that would 6000/sense and follow the position of the sun and rotate the panel in the direction of the sun to obtain maximum power output. EE93 Water Scheduling for Municipalities Water supply to different localities is done on time basis. The supply will be automatically cut once the time allotted to that particular locality lapses. 6800/- EE94 Electronic Security System for Homes/Industries with auto dialer. This system provides security to the homes or offices by interfacing sensors with the controlling units. If anything goes wrong, the system automatically dials up to the predefined number and also activates the alert system. 6000/- EE95 Energy Saver for Automatic Room Light Controller with Visitor Counter The system aims at saving the power by switching on/off the light depending upon the sensor output. It also counts the number of persons present in the hall and displays this value on the LCD. 6000/- EE90 EE91    

×