ShowNewsBrasil Paint Show – ABRAFATI 2011BYKJET – New Line of Wetting & Dispersing Additives for Inkjet InksNEW! Additives...
Show NewsNew DefoamersWe shapethe futureBYK-1740                                             Further Information?Check out...
Green Defoamer       based on Eco-friendly       and Sustainable Raw       Materials – BYK-1740       •	 100% VOC-free    ...
Show NewsNew DefoamersSilicone- and MineralOil-free PolymericDefoamer for Water-borne CoatingsBYK-1711 is a perfectly bala...
ABRAFATI 2011   Your Benefits   BYK-014   •	 Emission-free,	no	fogging   •	 Shows	excellent	defoaming	properties	in	variou...
Show NewsNew Wetting andDispersing AdditivesCost-effective!DISPERBYK-1996
ABRAFATI 2011New Polymeric DeflocculatingWetting and DispersingAdditive DISPERBYK-199 forAqueous SystemsDISPERBYK-199 is a ...
Show NewsNew Wetting andDispersing AdditivesNew ControlledFlocculating Wettingand DispersingAdditive for Water-           ...
ABRAFATI 2011       Your Benefits       DISPERBYK-198                                                   100% High Solids W...
Show NewsNew Surface AdditivesMacromerTechnologyBYK-355010
Patented Surface Active SiliconeAcrylate Copolymer for Solvent-borne SystemsBYK-3550 is not only a new surface additive. I...
Show NewsNew Surface AdditivesFluorine-free Silicone Additive toImprove Substrate Wetting andLeveling in Water-borne Syste...
Silicone-free Polymeric                                    Your BenefitsLeveling AdditiveA polymeric leveling additive wil...
Your Benefits                                                                   BYK-3933 P                                ...
ABRAFATI 2011Rheology Additivewith Temperature-Stable Viscosity                                                           ...
Show NewsAdditives forAdhesives & SealantsAdhesivePerformance                  Air Release Additives for Solvent-borne and...
ABRAFATI 2011Discover Adhesives Againwith BYKToday, in many industrial segments like the automotive and electronic        ...
Show News  NEW BYK-mac  Standardization in  Multi-angle Color                               Your Benefits  and Effect Cont...
ABRAFATI 2011NEW smart-chartSoftwareAll Critical Color and AppearanceParameters can be Controlled andAnalyzed within One S...
Show News NEW BYKJET Product lineAdditivesfor Inkjet Inks BYKJET-Additives 20
ABRAFATI 2011Novel Wetting & DispersingAdditives for Inkjet InksIn general, wetting and dispersing additives are used to i...
Show News            Adhesion Promoters            Adhesion Promoter            for Solvent-free,            High-solid, a...
ABRAFATI 2011    The demand for environmentally and health friendly    systems is constantly growing, more and more high-s...
“Our Vision”:The Innovative World                                                 Excellently	equipped	research	and	synthe...
Upcoming SlideShare
Loading in …5
×

Veja o que você conhecerá no estande Byk e Bandeirante Brazmo

1,557 views

Published on

  • Be the first to comment

  • Be the first to like this

Veja o que você conhecerá no estande Byk e Bandeirante Brazmo

  1. 1. ShowNewsBrasil Paint Show – ABRAFATI 2011BYKJET – New Line of Wetting & Dispersing Additives for Inkjet InksNEW! Additives for Coatings & InksDefoamers – Surface Additives – Rheology Additives – Pigment Wetting & Dispersing AdditivesNEW! Multifunctional Powder Coatings AdditiveNEW! BYK-Gardner QC Solutions• Objective mottling control• Efficient smart-chart QC software• BYK-mac “Green” formulations – What does this actually mean? A global industrial standard that precisely defines what “green” means does not yet exist. However the buzzword everybody talks about is “green.” All of us have a certain perception of what itAchieving “green” means and the demand for “green” keeps growing. It is therefore not surprising that for quite a while there has been a “green” influence in the development of new products in all industrialgoals together sectors. After all, “green” simply means environmentally-friendly. In the chemical industry the development of new products is also affected more and more by requirements arising from environmental laws. The growing “green” awareness among consumers is alsoOur customers can count on us when it comes to meeting the accelerating the trend toward more environmentally-friendly systems.“green” challenge, because we make it possible for them todevelop and produce environmentally-friendly products. What is environmentally-friendly? The VOC content of products and raw materials certainly is one ofNEW! Defoamer for aqueous systems the most important and decisive indicators of how “green” a productBYK-1740 is the sustainable and environmentally sound solution that is. However, the deciding factors are often the environmental friend-shapes the future. liness of a product based on the various eco-labeling systems that• 100% VOC-free – for zero-emission aqueous architectural coatings are in existence and the percentage of renewable materials in the and plasters product. Formulators still have to ask themselves: which specific• 100% sustainable – on the basis of vegetable oil derivatives requirements have to be met in developing “green” systems, which• 100% performance – absolutely comparable to standard defoamers raw materials are especially suitable to meet these requirements, based on mineral oil and where can these materials be best procured? In addition, they also want to be certain that the use of environmentally-friendly rawFor more information see page 3 materials does not adversely impact performance of the final product. To support our customers in all of these concerns, and to provide answers to any possible “green” questions, BYK has assessed the entire topic comprehensively and has coined the term “Greenability”. At BYK we have known for a long time that quality and environ- mental friendliness are not mutually exclusive. Quite the contrary: We already offer numerous products and technologies that meet current environmental standards without sacrificing BYK’s customary high quality.
  2. 2. Show NewsNew DefoamersWe shapethe futureBYK-1740 Further Information?Check out our brochures B-1, L-G 20, B-G 2, B-G 5 andCM-G 20 for further information on our “green” additives,services and range of products or take a look at:www.byk.com/greenability2
  3. 3. Green Defoamer based on Eco-friendly and Sustainable Raw Materials – BYK-1740 • 100% VOC-free for zero-emission aqueous architectural coatings and plasters • 100% sustainable on the basis of vegetable oil derivatives • 100% performance absolutely comparable to standard mineral oil-based defoamersYour BenefitsBYK-1740• Shows excellent defoaming properties• Is especially suitable for water-borne emulsion paints with PVC > 40 and emulsion plasters• Has no negative infl uence on color acceptance and odor• Is especially stabilized against yellowing • Shows good storage stability, as an additive itself and in the paint 3
  4. 4. Show NewsNew DefoamersSilicone- and MineralOil-free PolymericDefoamer for Water-borne CoatingsBYK-1711 is a perfectly balanced product:it is very efficient but still fairly compatible,and requires low to medium shear forces forincorporation. Silicone-free Polymeric Defoamer Your Benefits with Anti-popping Properties for Water-borne Systems BYK-1711 Silicone-based defoamers are very efficient in • Perfectly balanced product • Dosage level between 0.1- 0.5 % defoaming water-borne coatings. In systems (in exceptional cases up to 1.0 %) where silicone-free products are desired, • Easy to handle and incorporate • Stable product – no phase separation BYK-015 is the product of your choice! • No seeding in clear coats • Covers a wide range of applications BYK-015 is a silicone-free defoamer combining from UV to 2-pack, water-borne systems good defoaming with improved anti-popping in one product. Your Benefits BYK-015 • Good defoaming, especially in pigmented water-borne systems • Increases the popping limit of the coating especially in baking systems • No haze or turbidity in clearcoats4
  5. 5. ABRAFATI 2011 Your Benefits BYK-014 • Emission-free, no fogging • Shows excellent defoaming properties in various dispersions • Is especially recommended for water-borne interior and exterior emulsion paints (PVC range 30 to 85), plasters and adhesives • Suitable for wide pH range from 3 to 12 • No negative infl uence on yellowing, color acceptance or odor • Easy to incorporate • Highly economicalMineral Oil- and It is recommended for Further Information?Silicone-free water-borne interior and exterior emulsions in aDefoamer for PVC range from 30 to 85.Water-borne Since it is quite universal,Systems BYK-014 works equally well in plasters and adhesives. ItBYK-014 shows excellent has no negative influence ondefoaming performance in yellowing, color acceptancevarious dispersions such as or odor. BYK-014 is highlyacrylates or VAE´s (vinyl economical and easy toacetate ethylene). incorporate. Check out our brochure L-DI 1 for further information on our defoamers or take a look at: www.byk.com/support 5
  6. 6. Show NewsNew Wetting andDispersing AdditivesCost-effective!DISPERBYK-1996
  7. 7. ABRAFATI 2011New Polymeric DeflocculatingWetting and DispersingAdditive DISPERBYK-199 forAqueous SystemsDISPERBYK-199 is a cost-effective wetting and dispersing additivefor various water-borne coatings, decorative as well as industrial,both for resin-free slurry grinds or in combination with a grindingresin. DISPERBYK-199 is a copolymer based on modified acrylatechemistry and it stabilizes inorganic and organic pigments throughits anchoring groups and electrosteric working mechanism.DISPERBYK-199: Excellent Color Acceptance in a High Gloss Pure Acrylic Top Coat Paint: Colorant 97:3 Polyacrylate Polyacrylate plus DISPERBYK-199 Competitor SurfactantYour BenefitsDISPERBYK-199• Cost-effective alternative to commonly used dispersants (e.g. Na+ and NH4 salted polyacrylic + acids) and high molecular weight wetting and dispersing additives in aqueous systems• VOC < 1500ppm• APEO- and amine-free 7
  8. 8. Show NewsNew Wetting andDispersing AdditivesNew ControlledFlocculating Wettingand DispersingAdditive for Water- Your Benefitsborne SystemsANTI-TERRA-203 and ANTI-TERRA-204, which were developed ANTI-TERRA-250years ago for solvent-borne paints, stabilize pigments through acontrolled flocculation, which leads to excellent anti-settling • Reduced settling of inorganic pigments/properties. fi llers due to controlled fl occulation • No fl ooding and fl oating These controlled flocculating additives form a network via • Improved color acceptance and resulting hydrogen bonds, modify the rheology profile and form a yield lower ∆E valuespoint. To comply with the requirements of recent water-borne • Higher spreading in self leveling epoxy formulations, BYK transferred this successful concept of control- fl ooringsled flocculating wetting and dispersing additives and designedANTI-TERRA-250 for aqueous systems. Standard Standard Polyacrylate Deflocculating ANTI-TERRA-250 Competitor 1 Competitor 2 Additive evitiddA etalyrcayloP gnitaluccolfeD 052-ARRET-ITNA 1 rotitepmoC 2 rotitepmoC dradnatS dradnatS8
  9. 9. ABRAFATI 2011 Your Benefits DISPERBYK-198 100% High Solids Wetting • Is effective on organic pigments and Dispersing Additive for and carbon blacks • Excellent color strength, high gloss, Solvent-borne and Solvent- and transparency – less pigment input possible free Systems • Low viscosity of the pigment concentrates BYK developed a high molecular, 100% solids additive that provides out- • Good storage stability of the pigment standing pigment deflocculation and stabilization. DISPERBYK-2155 is concentrates/printing inks entirely flowable, storage stable and covers a wide compatibility range. DISPERBYK-2155: Spherical Structure Generates Flowable High Molecular Weight PolymerWetting and DispersingAdditive for AqueousPrinting Inks Conventional linear structure: DISPERBYK-2155 spherical structure: MW: 20.000 g/mol MW: 20.000 g/molWith the usage of DISPERBYK-198 you are now able to stabilize Solids content: 100% Solids content: 100% Viscosity: Not flowablepigments, where standard solutions fail. DISPERBYK-198 provides Viscosity: 13.000 mPa·sexcellent results with carbon blacks and organic pigments suchas some yellows and (red-) violets.DISPERBYK-198: High Gloss and Transparency in a Yellow (P.Y.150)Printing Ink Formulation Your Benefits DISPERBYK-2155 • 100% solidsStandard DISPERBYK-198 • Flowability and high molecular weight at the same time • Most versatile high molecular weight wetting and dispersing additive • Good millbase viscosity reduction • Excellent defl occulation/stabilization of inorganic and organic pigments Further Information? Check out our brochure L-WI 1 for further information on our Wetting and Dispersing Additives or take a look at: www.byk.com/support 9
  10. 10. Show NewsNew Surface AdditivesMacromerTechnologyBYK-355010
  11. 11. Patented Surface Active SiliconeAcrylate Copolymer for Solvent-borne SystemsBYK-3550 is not only a new surface additive. It bases on a newtechnology called: Macromer Technology.The additive is a silicone macromer modified polyacrylate, whichincludes both characteristics (acrylate & silicone) in one additive.This patented technology offers new properties which are onlyachievable by such a new chemistry. The additive itself is not a mix-ture. There are direct bonds between silicone chain and polyacrylate.BYK-3550 shows, depending on the type respectively polarity of thesystem, different shaped performances and a different mode ofaction. Macromer Technology • Direct bond between silicone chain and polyacrylate (no mixture) • Flexible adjustments to specific properties possible • Lower silicone content but still excellent performance (excellent surface tension reduction and better recoatability at the same time)Silicone-macromermodified Polyacrylate X Silicone chain X Acrylate chainYour BenefitsBYK-3550in polar systems:• Strong surface tension reduction in liquid coatings result in good substrate wetting• No signifi cant reduction of the dry surface energy• Excellent leveling due to acrylate backbone• Good anti-crater properties due to effi cient silicone• No increase of surface slipin non-polar systems:• Superb recoatabilitiy and leveling due to the long acrylate chain• Excellent anti-blocking properties due to surface active silicone 11
  12. 12. Show NewsNew Surface AdditivesFluorine-free Silicone Additive toImprove Substrate Wetting andLeveling in Water-borne Systemsand Solvent-free UV CoatingsA drawback of modern formulations is that thewater component, due to a dramatically reducedamount of co-solvents, causes a much highersurface tension.Hence, substrate wetting becomes more difficult.Without using environmentally critical fluorosur-factants or additive combinations with differentprofiles (i.e. utilize a mix of surfactants, silicones,acrylates or alcohol alkoxylates) BYK-3455 showsa strong reduction of dynamic and static surfacetension and therefore an excellent substratewetting. Additionally, due to the high mobilityof the additive to the surface BYK-3455 gives anextra positive effect on leveling. Your Benefits BYK-3455 in water-borne coatings: • Improved substrate wetting, fl ow and leveling • Strong reduction of static and dynamic surface tension • Better pore wetting of wood substrates • No infl uence on intercoat adhesion • Reduced picture framing / fi sh eyes • No increase in slip in solvent-free UV coatings: • Improved substrate wetting, fl ow and leveling • No foam stabilization
  13. 13. Silicone-free Polymeric Your BenefitsLeveling AdditiveA polymeric leveling additive will be the best choice BYK-399for systems that first and foremost require good In coil coatings:leveling, followed by reduced surface tension, and • Excellent leveling additivesubsequently the use of a silicone- and fluorine-free • Slight reduction of surface tension additive. approx. 1- 3 mN/m) (BYK-399 is a 100% active-substance, polymeric • Improved results in terms of substrate leveling additive for solvent-borne coatings that is wetting • Defoaming effect at higher dosages effective at low dosages and shows a convincing, ( 0.7%)well-balanced performance in different coating • Highly compatiblesystems, systems, such as coil-, can-, industrial-and automotive coatings. In can coatings: • Excellent leveling properties with high DOI values Highly compatible - Effective at low dosages -Further Information? • Provides a slight reduction of surface tension Improves substrate wetting in - Check out our brochure L-SI 1 for further information systems where silicones are not on our Surface Additives or accepted take a look at: www.byk.com/support • Compliant with FDA 175.300 at a dosage up to 0.1% as supplied based upon total formulation In automotive coatings: • Silicone-free – no risk of foam stabilization 13
  14. 14. Your Benefits BYK-3933 P • High, unspoiled transparency with minimized haze in powder clear coats • Sound wetting and easy coatability which is important for powder coatings that are basecoats or get recoated with liquid coatings • Prevents fogging effects which are caused by evaporation or humidity Multifunctional Additive for Clear and Pigment Powder Coatings Perfect leveling is a “must” for every powder coating.BYK Additives for Consequently, there is a wide choice of standard leveling additives available. However, there are different coatingPowder Coatings problems and performance profiles that can´t be served by the usual products such as: • high transparency in powder clear coatsMicronized Wax Additives • increased surface tensionGloss reduction CERAFLOUR 920 • wetting and coatability of powder coatings CERAFLOUR 950 • fogging effects on powder coatings CERAFLOUR 970 CERAFLOUR 990 CERAFLOUR 991 Contrary to the standard leveling additives, new BYK-3933 PPigment wetting CERAFLOUR 960 has a multifunctional performance profile. CERAFLOUR 994Out-gassing CERAFLOUR 961 CERAFLOUR 962 CERAFLOUR 988 BYK-3933 P – Only Low Influence on Transparency in a Hybrid System CERAFLOUR 993Surface slip CERAFLOUR 961 High haze Low haze CERAFLOUR 980 CERAFLOUR 990 CERAFLOUR 996 CERAFLOUR 998Anti-slip CERAFLOUR 920 CERAFLOUR 970Texture CERAFLOUR 965 CERAFLOUR 968 CERAFLOUR 969 1.5% Standard additive 1.5% BYK-3933 PStructure CERAFLOUR 967 Test system: Polyester/epoxy clear coatAcrylate Additives forAnti-cratering, Leveling and Surface Flow ControlStandard additives BYK-360 P Further Information? BYK-366 P BYK-368 P BYK-3900 PSpecial additives BYK-364 P Check out our binder for further information on our BYK-3931 P Powder Coatings or take aMasterbatch additives BYK-356 look at: BYK-359 www.byk.com/support BYK-361 N14
  15. 15. ABRAFATI 2011Rheology Additivewith Temperature-Stable Viscosity Rheology AdditivesBehavior for Solvent-borne SystemsTo improve anti-sagging properties in forced drying and baking systems,which are used for automotive, automotive refinish, industrial and BYK-415 – Temperature-Stable Viscosity Profileplastic coatings, specific requirements have to be fulfilled by the rheology 1additive. It has to build up a structure immediately after the sprayapplication and has to ensure a stable viscosity profile at differenttemperatures during evaporation and the drying phase. Excellent Viscosity (Pa · s)anti-sagging properties are achieved only when these standards areattained, and this leads to a higher application security. 20 40 60 80 100 120BYK-415 is a newly developed liquid rheology additive for automotive Temperature (°C)and industrial coatings especially suited for this purpose. The additive X BYK-415 X Sag Control Agent X Fumed Silica X Polyamide X Controlhas an excellent compatibility and shows no turbidity in the liquidcoating, which makes it especially suited for clear coats. In high-rotationbell applications a combination of BYK-415 with BYK-430 guaranteesperfect flow and anti-sagging properties. BYK-415 – Assessment of Sag ResistanceBYK Range of Liquid Rheology Additives High-rotation bell application on Sag resistant perforated metal plate no tear drop BYK-410 BYK-411 BYK-415 BYK-420 BYK-425 BYK-428 BYK-430 BYK-431Chemical Urea Urea Polyurea Urea Urethane Urethane Polyamide PolyamideComposition 55 µm 43 µmFlow Wedge applicationbehaviorThixotropic X X XPseudoplastic X X X X Requirement: Improvement of sag resistance especially under temperature increaseNewtonian X Tear drop test Drying: 20 min. / 140 °CPolarityCompatibilityWater X X XHigh polar systems y y yMedium polarsystems X y X X yLow polarsystems y X y XIncorporationPostaddition X X X X XMediumshear X X y y y y y yHigh shear/grind X X X y y X XX recommended y suitable Your Benefits BYK-415 • Temperature-stable viscosity behavior • Improved anti-sagging properties due to fast structure recovery • Less infl uence on fl ow & leveling • No turbidity in the liquid paint • Shear-stable viscosity profi le • Excellent compatibility and easy incorporation • Minor impact on yellowing due to 15 temperature or UV exposure
  16. 16. Show NewsAdditives forAdhesives & SealantsAdhesivePerformance Air Release Additives for Solvent-borne and Solvent-free Systems Polyurethane systems Epoxy systems Acrylates BYK-066 N BYK-A 530 * BYK-070 BYK-088 * BYK-A 550 * (silicone-free) BYK-A 515 (silicone-free) BYK-A 535 (silicone-free) * Additive complies with FDA 21 CFR § 175.10516
  17. 17. ABRAFATI 2011Discover Adhesives Againwith BYKToday, in many industrial segments like the automotive and electronic Further Information?industry, the use of adhesives as a connecting element is out of thequestion. New materials and processing technologies require modern New Additive Catalog forand innovative adhesive systems which are inevitably combined with Adhesives & Sealantseffective and efficient raw materials. • Technical data sheets with application information • Detailed information on theBYK is your competent technology partner when it comes to mode of action of additivesimproving adhesive performance! Check out our Adhesives & Sealants finder for further information orAs the market leader for surface additives, pigment and filler wetting take a look at: www.byk.com/supportBYK’s core expertises lead to innovative additives for many differentkinds of adhesives.BYK understands the language of the adhesive market.Additives for Adhesives & Sealants• Defoamers and air release additives• Liquid rheology additives• Wetting and dispersing additives• Surface additivesBYK Rheology Additives for Adhesives & Sealants Adhesives & Sealants based on Polyurethane, Water-based systems: Epoxy and Acrylate: Anti-setting BYK-E 420 Improved rheology, anti-setting Anti-sagging BYK-425 liquid rheology additive: BYK-E 410 High shear BYK-428 Improved anti-sagging properties tickening liquid rheology additive: BYK-430 In combination with fumed silica: BYK-R 605 In combination with fumed silica: BYK-R 605New Additive Solutions for Reactive Adhesives and Sealants Wetting & Dispersing AdditivesViscosityreductionAnti-Settling &Colour StabilityPolyurethane BYK-W 969 BYK-W 980 BYK-W 961 BYK-W 985 BYK-W 966 BYK-9076Epoxy BYK-W 985 BYK-W 940 BYK-9076Acrylate BYK-W 969 BYK-P 105 BYK-W 940 17
  18. 18. Show News NEW BYK-mac Standardization in Multi-angle Color Your Benefits and Effect Control BYK-mac of Metallic Finishes • Multi-angle color (-15°/ 15°/ 25°/ 45°/ is Becoming Reality 75°/ 110°), Sparkle and Graininess measurement are objectively measured with one instrument • Color standards can be electronically Innovative technologies (LED light sources, transferred to other BYK-mac users camera technology and patented calibration • Temperature stable results and long term routines) result in an unsurpassed and proven calibration interval (3 months!) • 10 year warranty on light sources “Repeatability and Reproducibility” gauge • Pass / Fail results displayed on the instrument performance. for instant feed back of color performance at the production line • Professional data documentation and analysis with new software, smart-chart: Scorecards – Trend charts 18
  19. 19. ABRAFATI 2011NEW smart-chartSoftwareAll Critical Color and AppearanceParameters can be Controlled andAnalyzed within One Software Package Your Benefits smart-chart It is smart in more than • One software package to document one way. 6 different apps and analyze color, effect, orange peel let you set up a state-of- and mottling the art color & appearance • Powerful standard management with ability management system – the to using digital color standards among the prerequisite for continuous entire supply chain for seamless communication process improvement. • Customer specifi c color and appearance scales for major automotive makers are already predefi ned • Data analysis was never easier. See all your test series at once. Select fi lter criteria and view the measurement data with a click Mottling, a Customer RelevantPurchasing Criterion, can now NEW cloud-runnerObjectively be Measured at theProduction LineUp to now mottling was evaluated mainly visually and so the perceived resultswere dependent on the auditor and the lighting conditions. The cloud-runneris small and light weight. And quickly scans over a large surface area – up to100 cm scan length. Your Benefits cloud-runner • Objectively measure what is perceived as mottling • Easy-to-use “mottling index” for pass / fail analysis • Independent of color and texture of effect finishes • Intuitive operation with scroll-wheel and large display 19 • Data analysis with new software smart-chart
  20. 20. Show News NEW BYKJET Product lineAdditivesfor Inkjet Inks BYKJET-Additives 20
  21. 21. ABRAFATI 2011Novel Wetting & DispersingAdditives for Inkjet InksIn general, wetting and dispersing additives are used to improve opticalproperties of inkjet inks in terms of color strength, transparency andgloss. Also they have to provide an outstanding viscosity reduction ofpigment concentrates as well as final inks in combination with anefficient long-term storage stability without any viscosity shift.Additionally wetting and dispersing additives have to meet specificrequirements, which are requested in inkjet applications, i.e.prevention of blonzing phenomenon, avoiding cogation in thermalprinting process and improvement of brightness, sharpness andscratch resistance (“smudge” resistance).Another import aspect is a positive impact on processibility andapplication of inkjet Inks. Suitable wetting and dispersing additiveshave to offer very narrow and small-sized particle size distributionsto improve ink’s filterability and have to provide a noticeable positiveimpact on jettability (long run application).BYKJET Wetting & Dispersing AdditivesSolvent-borne Applications UV-Curable Applications Water-borne ApplicationsBYKJET-9130 BYKJET-9150 BYKJET-9170BYKJET-9131BYKJET-9132BYKJET-9133Recommendation Chart for Solvent-borne Inkjet Inks BYKJET-9130 BYKJET-9131 BYKJET-9132 BYKJET-9133InkJet Yellow y X XInkJet Magenta X y XInkJet Cyan y X X yOther pigments * X X y yInkJet Black y XX recommended y suitable* Various pigments are additionally used to achieve a high quality color matchingYour BenefitsBYKJET-Additives• Outstanding pigment stabilization of pigments leads to unique color brilliance• High effi cient viscosity reduction of pigment concen rates as well as fi t nal inks• Long-term storage stability of concentrates and inks without any viscosity shift • Wide compatibility in typical inkjet systems• Excellent fi lterability due to narrow and 21 small-sized particle size distribution
  22. 22. Show News Adhesion Promoters Adhesion Promoter for Solvent-free, High-solid, and Solvent-borne 2-pack Epoxy Systems 22
  23. 23. ABRAFATI 2011 The demand for environmentally and health friendly systems is constantly growing, more and more high-solid and solvent-free 2-pack epoxy systems are being developed in the industry. Adhesion is one of the key challenges for these systems. BYK-4511 is a new adhesion promoter based on a new technology, which completely fulfil this essential request.BYK-4511 – Excellent Continuous Condensation Test Results Control Reference 1 Reference 2 BYK-4511Test System: 828 type epoxy/polyamide primer system; Substrate: cold-rolled smooth steelTest Conditions: 168 h; Dosage: 1% active substance Your Benefits BYK-4511 • Improves adhesion on several metal substrates, such as sandblasted steel, cold-rolled steel, galvanized steel, aluminum, and also on glass... • Improves the surface tolerance when, for example, the paint is applied on oily or rusty surfaces • Improves the overall performance of multi-layer systems • Increases the fl exibility of the paint fi lm • Increases anti-corrosive performance hesion o for our ad ask als nd Please -4500 a al rs BYK tur pr omote rchitec for a BY K-4510 al coatings stri an d indu 23
  24. 24. “Our Vision”:The Innovative World Excellently equipped research and synthesis Why not fi nd out more and request your of BYK Products laboratories as well as regional service labs constitute a sustainable infrastructure. It is own copy of “Our Vision”? Just send an email to Frank.Dederichs@altana.com or Anyone wishing to attain global success on this basis that BYK develops innovations phone us on +49 281 670-25004.today requires a clear strategy. For BYK it is that provide perfectly tailored solutions for clear that proximity to the customers is the new market trends and challenges. Current ww.byk.com/visiondetermining factor for success. From its examples of this are the new product line work in partnership with its customers, the for ink jet applications and the wetting and company is developing innovative additives dispersing additive DISPERBYK®-2012, this for coatings, plastics and industrial applica- year’s winner of the BYK Advance innova-tions, as well as testing and measuring tion award.instruments. With the publication “Our Vision – Innovations at BYK”, the company A further milestone in our product develop-presents itself and its range of products. ment is our nanoadditives. These exception- ally versatile additives are suitably for the BYK is an international presence: with its widest variety of applications. The global sales network, the company always Greenability program, meanwhile, rounds has an ear to the market. Thus it ensures off the company’s product portfolio. It ena-that it is always abreast of the requirements bles BYK to provide its customers with eco-that arise in the various sectors and regions. friendly product solutions. Visit us at Booth #58, 59, 72, 73Need Additional Information or Free Product Samples?Contact your local BYK technician for additionalinformation on BYK’s innovations at ABRAFATI2011 or simply send an e-mail to:info@byk.comIf you would like to order free additive samples,you can do so from our service area on ourwebsite: www.byk.com/additivesGet the Additive Guide app for your iPad! Additive GuideShow News BYK-Chemie GmbH BYK-Gardner GmbH ANTI-TERRA®, ATEPAS®, BYK®, BYK®-DYNWET®, BYK®-SILCLEAN®, BYKANOL®, BYKETOL®, BYKJET®,Brasil Paint Show – ABRAFATI 2011 P.O. Box 10 02 45 Lausitzer Straße 8 BYKOPLAST®, BYKUMEN®, DISPERBYK®, DISPERPLAST®, ISAROL®, LACTIMON®, NANOBYK®, SCONA®, 46462 Wesel 82538 Geretsried SILBYK® and VISCOBYK® are registered trademarks of BYK-Chemie.A publication of BYK-Chemie GmbH. Germany Germany AQUACER®, AQUAMAT®, AQUATIX®, CERACOL®, CERAFAK®, CERAFLOUR®, CERAMAT®, CERATIX®, Tel +49 281 670-0 Tel 0-800-gardner HORDAMER® and MINERPOL® are registered trademarks of BYK-Cera.The person to contact for content is Fax +49 281 65735 (0-800-4273637)Stefan Gollnick, +49-8171-3493-0 This information is given to the best of our knowledge. Because of the multitude of formulations,Tel +49 281 670-25006 info@byk.com Fax +49-8171-3493-140 production and application conditions, all the above-mentioned statements have to be adjusted to thee-mail: Stefan.Gollnick@altana.com www.byk.com circumstances of the processor. No liabilities, including those for patent rights, can be derived from this www.byk.com/ instruments fact for individual cases.Editorial team: Sherry Brown, Frank Dederichs, This issue replaces all previous versions – Printed in BrasilStefan Gollnick, Wilhelm Klammer,Aurelio Rocha, Nicole Weiand 10/2011Layout and Design: heureka! GmbH,Nicole Weiand

×