Successfully reported this slideshow.
Your SlideShare is downloading.
We use your LinkedIn profile and activity data to personalize ads and to show you more relevant ads. You can change your ad preferences anytime.
  • Be the first to comment

Plastic Manufacturing Company - Business Plan

  1. 1. E n t r e p r e n e u r s h i p a n d N e w B u s i n e s s F o u n d a t i o n 2013 Care Plastics Pvt. Ltd Business Plan Arpana Pradhan AyushMan Tamrakar Jashmina Pradhananaga Kathmandu College of Management
  2. 2. Acknowledgement We would like to express our sincere gratitude towards Kathmandu College of Management, for providing us with the opportunity to prepare this business plan and also for guiding us throughout the project. We are also thankful to Mr. Shree Ranjan Wasti, Lecturer of Entrepreneurship and New Business Foundation for helping us conduct the research. We would like to acknowledge his valuable guidance and support that motivated us to contribute tremendously to this report. The success of this report also depends on the encouragement and guidelines of many others. So, we would like to take this opportunity to thank all of them who have helped us through this report. We conducted a research on the bottle manufacturing process and via this research we have been able to envision ourselves with ideas regarding the scope and challenges of business opportunities in Nepal. We believe that it will really help us get our dreams come true in the near future. Through this project we have gained a lot of experience in finding out more about the subject matter and the entrepreneurship concepts as well as the financial and business concepts. Moreover we have gained the knowledge of the process and how this subject actually helps is to be and entrepreneur. After the project, we realize that setting up a new business requires a lot of thought and hard work. Last but not the least, we would also like to thank all the friends who were always supporting and there when needed. Thank you. Arpana Pradhan Ayush Man Tamrakar Jashmina Pradhananaga
  3. 3. Signature Page I hereby certify that I have read this document and, in my opinion it is satisfactory in scope and quality as a business plan project held during third year sixth semester for the under graduate course of Entrepreneurship and New Business Foundations held at Kathmandu College of Management. . Date: __________________________ Remarks: ……………………………………………………………………………………………………… ……………………………………………………………………………………………………… …………………………………………………………………...………………………………… ……………………………………………………………………………………………………… ……………………………… ________________________________ Mr. Shree Ranjan Wasti Entrepreneurship and NBF Instructor Course Facilitator Kathmandu College of Management
  4. 4. Copyright All rights of this report are reserved. No part of it may be reproduced or transmitted in any form without the prior notice and permission by the authors. No patent liability is assumed with respect to the use of the information content there in. Authors: Arpana Pradhan Ayush Man Tamrakar Jashmina Pradhananaga Kathmandu College of Management Gwarko, Lalitpur Date: 20th May 2013 Disclaimer
  5. 5. The objective of this report was to gain insight in the field of making business plan and analyzing the financial situation and feasibility of a bottle manufacturing company in Nepal. The authors are confident that the results of the analysis and the results presented in this report will be taken as guidance for a comprehensive study at the future date. The authors are not responsible or liable legally and morally against the results and consequent decisions based on the responses received from the analysis. The views expressed in this report are those of the group members only. Table of Contents
  6. 6. Executive Summary 1.0 Company Description 1.1 Company History 1.2 Missions Statement 1.3 Products 1.4 Current Status 1.5 Legal Status and Ownership 2.0 Industry Analysis 2.1 Industry Size Growth Rate and Sales Projections 2.2 Industry Structure 2.3 Nature of Participants 2.4 Key Success Factors 2.5 Industry Trends 2.6 Long Term Prospective 3.0 Market Analysis 3.1 Market Segmentation 3.2 Buyer Behavior 3.3 Total Market Demand 3.4 Competitors Analysis 3.5 Market Share 3.6 Sales Forecasting 4.0Marketing Plan
  7. 7. 4.1Overall Marketing Strategy 4.2Product Price Place Promotion 4.3Marketing Expense 5.0 Production Plan 5.1 General Approach to Production 5.2 Fixed Asset Requirement 5.3 Life of Fixed Assets 5.4 Planned Capacity and Future Capacity 5.5 Factory Location and Layout 5.6 Raw Material Requirement and cost 5.7 Labor Requirement and Cost 5.8 Labor Motivation 5.9 Indirect Factory Overhead 5.10 Per Unit Cost of Production 6.0 Product Design and Development Plan 6.1 Development Stats and Tasks 6.2Challenges and Risks
  8. 8. 6.3 Intellectual Property 7.0 Management Team and Company Structure 7.1Management Team 7.2Company Structure 7.3Preoperatibng Activities and Cost 7.4 Fixed Asset Requirement 7.5Administrative Office 8.0 Financial Plan and Projections 8.1 Assumptions Sheet 8.2 Sources and Uses of Funds Statement 8.2.1.0Total Capital Requirement 8.2.1.1Fixed Capital 8.2.1.2Working Capital 8.2.1.3Preoperating Expenses 8.2.1.4 Others 8.2.2 Capital Structure 8.3Loan Repayment Schedule 8.4Selling Price 8.5Income Statement 8.6Cash Flow Statement 8.7 Balance Sheet 8.8Return on Investment 8.9 Break Even Point Executive Summary
  9. 9. Plastic is the basic need of our day to day life. During recent years the plastic industry has grown with a substantial growth rate. This growth is driven by 3 sectors viz. packaging, infrastructure and agriculture. PET bottles have become highly popular packaging for many kinds of liquid products such as soft drinks, drinking water, cooking oil because o f its s trength, light we ight , and s atis fac to ryresistance to acids and almost all organic solvents. We, the Care plastics provide a wide range of plastic bottles solutions for household and raw material for packaging of various companies. Care Plastics Company is planning to start its way with a view to manufacture plastic bottles in Nepal. Ourmainfocus isourindustrialcustomerwhomwewillsellPETbottles andPET flakes. It will contribute more than 90% of our sales. We will also support on the household plastic business which is the part of our portfolio. The pre operating cost will be Rs 131000. Sinceplastic materialdoes notcarryanybrand nameso itwillgiveus anadditionalbenefit in long term to establish our brand name. To exploit the market we willus e p enetratio n p ric ing as o ur marketing s trategy and util ize o ur s tringent distributionnetworkandstrongindustrialrelationship. 1.0 Company Description
  10. 10. 1.1 Company Description The company will provide a wide range of plastic bottles for both producers and consumers. The products for consumers can be suitable for household water refilling purposes and portable water carriage purposes. However, our potential customers are business producers who will be producing soft drinks and juice. The market will be favorable for us as the prices have been set at a reasonable level. The company after a stable start off will apply a sustainable green approach and use recycled materials. The company has its production set up in Dhulikhel where a positive advantage will exist as the sector has sufficient manpower and resources and it has a direct link with transportation and communication. The administrative decisions will be centralized from the capital of the country, Kathmandu. The office will be set up in Bagbazar. This location is best favorable with the potential market and will benefit at its best. 1.2 MissionStatement
  11. 11. Care Plastics Pvt. Ltd. is a manufacturing company dedicated to manufacture plastic bottles, utilizing environmentally friendly manufacturing methods. We intend to make enough profit to generate a significant return for our investors and to finance continued growth and continued development in quality products. We will also maintain a friendly, fair, and creative work environment, which respects diversity, new ideas and hard work. Care Plastics Pvt. Ltd.  Strives to provide the excellent plastic bottle solution to the customers at competitiveprices.  Continuallyexpandsourrangeofproducts.  Ispoisedtoservicebothlargeandsmallcustomers
  12. 12. 1.3 Products Product no.: 901 Product Code: AGYR Product Name: PET Orange Product Color: Transparent/Brown/Green Product Description: Bottle for Juice and Medical Use Product Size: 8 inches Product Weight: 30 gm Product no.:902 Product Code: KLRH Product Name: PET Blue Product Color: Transparent/Blue/Brown/Red Product Description: Bottle for Household use Product Size: 12 inches Product Weight: 70gm Product no.: 903 Product Code: GTWY Product Name: PET Glass Product Color: 904 Product Description: Bottle for Mineral Water Product Size: 10 inches Product Weight: 30 gm Product no.: 904 Product Code: TSGF Product Name: PET Cola
  13. 13. Product Color: Transparent/Green Product Description: Bottle for Cola and Soda Product Size: 7 inches Product Weight: 60 gm 1.4 Current Status Total Assets:Nrs. 1,93,07,974 Total Capital: Nrs. 73,07,974 Total Liabilities: Nrs. 1,20,00,000 Office Address: Bagbazar, Kathmandu, Nepal Factory Location: Dhulikhel, Kabhre, Nepal Warehouse Location: Dhulikhel, Kabhre,Nepal No. of Employees in the Office: 10 No. of workers in the Factory: 19 1.5 LegalStatus and Ownership (As on 2013) Company Name: Care Plastics Pvt. Ltd.
  14. 14. PAN no. 121291235 Established year: 2013 Company Share: 1/3 ownership of Arpana Pradhan 1/3 ownership of Ayush Man Tamrakar 1/3 ownership of JashminaPradhananga 2.0 Industry Analysis 2.1 Industry Size Growth Rate and Sales Projections The plastic bottle manufacturing industry has had a steady growth rate in the past decade in Nepal. However, the recent years have brought an increase in various brands and
  15. 15. companies that have created an increased demand for bottle manufacturing in Nepal. The plastic products manufacturing industry has players who produce not only packaging bottles, but also plastic utensils, plastic buckets, plastic water tanks, plastic plumbing products etc. the bottle manufacturing companies have received high demands lately due to the increase in mineral water production. Demands are also placed by other small to large food industries such as pickles, mayonnaise, jam, honey, coffee, tea, etc. 2.2 Industry Structure The following pattern islikelytobe general but therewill be somevariation fromcountrytocountry. Raw MaterialProducers These are chemical and petroleum companies who produce "virgin" plastic (sometimes called resin or polymer) in huge quantities. Virgin material is delivered in powder or pellet form, in plastic or paper sacks of around20 kilos weight, in large cardboard drums that hold many times that quantity or even by roadtanker. Compounders These specialist companies, usually small, stock various polymers and provide the manufacturers of plastic goods with technical advice and the most suitable materials or mixtures for each individual need. Stockists These warehouses stock polymers and compounds but neither manufacture themsel ves, nor pro vide a compounding ser vice. The y may be age nts or subsidiaries of the producer companies or departments of companies concerned with the supply of other materials such as chemical, rubber or paper. They may be willing to stock reclaim alongside virgin materials, especially if these are in shortsupply. SpecialistManufacturers orMolders T he s e b u y t he i r r a w m at e r i al s f r o m c o m po u n de r s . If t he y do t h e i r o w ncompounding, or if the m aterial is used as pro duced and does not needcompounding, they m ay buy direct from stockists or produce rs. The y arespecialists inplastics and do not perform other types of manufacturing. They may be an attractive market to the manufacturer because they operate at high volume, but rarely have as much flexibility to vary product quality as molders who know, accurately, thefinal market fortheproduct. Other Manufacturers Many companies are not plastics specialists but employ molding operations in the manufacture of some other product. For example shoe and boot makers use plastics
  16. 16. extensively and may carry out the various plastics molding operations in the same production sequence as the work in leather, canvas, rubber etc. Manymanufacturers use plastic packaging machinery at the end of a production operation. Fabricators These firms cut and join sheet, rod or extrusion to manufacture a variety of products. They have no opportunity to use reclaim. Machinery and Tool Makers one othersectoroftheplasticsindustryjustifiesmentionalthoughnotcustomersforreclaim. Themakersand suppliers of plastics manufacturing machinery, tools, moulds and dies are well informed about who does what, who makes what and who uses what withinthe local plastics industry. They may advise who islikelytobuy material 2.4 Key SuccessFactors The main keys tothe successoftheCompany are: •Secure Supply- Contract for supply of post-consumer bottles and post-industrial manufacturing waste forPET raw material feedstock. •Satisfy ourcustomersothat we canretainthem •Maintain lowoverhead and operatingcosts •Provide betterpricesthan all ourcompetitors 2.5 Long Term Prospective The development of Care Plastics required to accomplish a series of action and formalities. Since we are new in the market we kept our production low initially, as demand will increase the production will be enhanced respectively. Now we are manufacturing only two types of plastic bottles i.e. PVC andPET, as we grow we will produce a wide the range ofplastic bottles.The development processinvolves following steps:
  17. 17. •Legal formalities •Office/businesssetup •Future offeringsand expansion plan Development strategy In future we are looking for the production of a variety of plastic bottles. These plastic bottles will be •LDPE (Low densitypolyethylene) •HDPE (High densitypolyethylene) Our long term strategy will base on timely completion of the establishment of the business centre with low execution cost. Our strategy will focus not only the current uninterrupted productionof PVC and PET bottles and acquisitionof customer as fast as we can, but we will also look for the future expansion plan and execution strategy. Our future development strategy will focus on to chart out a careful plan for the future expansion and growth of our business. The development strategy will address followingissue: •How will we expand our services? •Which arethe new areas we will include toprovide our services? •What will be theformat ofthebusiness? Our development strategy will address all those above mentioned point. As we will grow and our earning will increase, we will produce more of PVC and PET bottles as well as expand in new area. We have a development strategy to expand our facilitysize in ordertomeettheproduction size 3.0 Market Analysis 3.1 Market Segmentation Strong demand for plastic bottles is working in the industry's favor. Major users of plastic packaging, apparently responding to consumer desires, have begun incorporating at least some recycled plastic content in their products as part of the growing interest in recycling. Resin demand is on the rise as prices for the two major recycled resins, PET and HDPE, continue to hold value or appreciate against their virgin counterparts. The Company has chosen its target markets because PET is in high demand as flake resin by converters, as roll stock sheet used to produce high visibility packaging and as
  18. 18. high strength strapping for the lumber industry. Sales are price-sensitive, so that proximity to markets and feed stock source provide a competitive edge. 3.2 Buyer Behavior Since we are ne w player in the m arket so we need to m ake some stringent strategies to penetrate market and grab customers. The customers of the plastic bottles industry are scattered due to lack well known brand names. So our first priority will be to accumulate the defused customers. The direct customers are the customers whom we are selling our prod uctregul arly. So for us house holds whom we are selling plastic goods andcompanies who are getting raw materials for packaging are direct custome rs (PE T bottles). So only i n Kat hm andu, in terms of business to business market around 20small and medium scale companies are our direct customers. Apart from them there are few small companies which are giving compounding services. They use to collect various types of plastics flakes along with the virgin plastic and suggest customer (companies) in choosing appropriate plastic. An Asha enterprise is one compounder whom we will sellourplastics. 3.3 TotalMarketDemand Demand can be defined as the quantity which consumer is willing to purchase at a given price during a certain time period. In our case, demand will be determined by the individual demand of the shops selling plastic bottles. The estimation of the demand of the bottles is shown as follows: Monthly demand (in Shop Number(in sample)
  19. 19. quantity) 1 2 3 4 5 Bottles 1120 965 1050 1035 930 Total Market Demand = 5100 units per month Number of Competitors (Manufacturers) = 3 No. of shops selling bottles = 24 Average Market Demand = (5100 / 5) units = 1020 units per month Actual Total Market Demand = (1020 * 24) units = 24480 units per month 3.4 Competitors Analysis In plasticbottlesmanufacturing marketthereis nospecificbrandname existingsothe marketisflooded bysmallcompanies which areinthisbusiness. Sotheyareour biggestdirectcompetitors.As we arealso not alone as a supplier of PET to the companies as raw materials there are many companies in this region which are supplying PET. Om Plastic Industries is one of them who is currently selling all types of plastic bottles. So in case of business to business market they are our direct competitors. 3.5 MarketShare Market share will help us determine our competitors, total market share of different competitors and how we plan to make sure that we grab more of the market share in the
  20. 20. future. Our market share will be estimated on the basis of number of competitors. The industry has only 3 known competitors. Therefore, the market share of our company is: Market share = (24480 / 4) units = 6120 units per month 3.6 Sales Forecasting The next important factor for success is planning. Planning involves the forecasting of sales; that is, determining the amount of sales in advance. It helps to estimate the amount of production to be done. Forecasting of the sales depends on the market share of the product. Uncertain environment becomes a barrier to effective forecasting of sales. Sales can be forecasted through: 1. Conservative estimation (60% - 70%) 2. Moderate estimation (70% - 80%) 3. Aggressive estimation (80% and above) The sales forecast for the first five years is as follows: Year Sales (inqty) Sales (in amt)(Rs.) 2014 55080 1,28,33,640 2015 58752 1,36,89,216 2016 62424 1,45,44,792 2017 66096 1,54,00,368 2018 73440 1,71,11,520 4.0Marketing Plan 4.1OverallMarketing Strategy The Com pany has chosen to focus on t he production of plastic bottles packagin g materials from recycled post-consumer beverage bottles. We have identified a significant available market in the eastern part of Kathmandu. All of our
  21. 21. initial marketing strategy will be to secure contracts in t hat segme nt, and after reachi n g full planned capacity, we look to grow in concert with that segment and related markets. We see little need at present for further market research and development, and will focus oncontinually updating our production technology in aneffort to remainingthe forefront of ourchosenmarketplace. 4.2ProductPrice Place Promotion  Product/Service Strategy The packaging companies require high quality and highly transparent PET bottles. The companies which are producing mineral water will reject PET bottles with even a small impurity/ opaqueness. So we the Care Plastics provide high endPET flakes for the perfect packaging. The company will apply recycling and extrusion technology managed by decades of industry specific expertise to create a competitive advantage for its clients. These processes will produce clean, cost-efficient, recycled raw material for manufacturers of thermoform, laminate and other high value-added products, and high strength packaging strapping for shippers of large products and pallets, t h e r e b y r e d u c i n g c o s t s a n d c r e a t i n g a c l e a r p r i c i n g e d g e a m o n g t h e i r competitors. Plastic bottles are now in high demand. And this demand is driven by continuously increasing promotional activities.  Pricingstrategy As plastic products do not carry any brand name so only pricing and distribution strategies will work to achieve competitive edge. The pricing strategy we will use is penetration pricing. The price of the plastic bottles we will sell will be lower than the market price. Also for the PET flakes and bottles the price will be lower than the competitors. A lower price enables us to get contracts of PET bottles and sheetsfromvarious companies .  Place strategy Firstly we will target Kathmandu, Bhaktapur and Lalitpur areas. We will have a distribution center in Kathmandu which continuously maintains the supply of the bottles. PET bottles will be stored in warehouse
  22. 22. which is close to the facility itself. The sales people will directly contact to the companies whichrequirethesebottlesfor packaging and look for the contracts. In city as stated above that we will have a distribution center, from that center we will distribute towhole sellers.  Promotionstrategy Wewillpromote through o nline social me dia and we will also de velo p our website which enables us to widely spread our contact among various companies. The site will have full details of product which are available for companies as well as end user. 5.0 Production Plan 5.1 GeneralApproach to Production Plastic bottles are the preferred containers for most soft drinks as well as for light household cleaners and other consumer goods. Small manufacturers can make custom plastic bottles using virgin or recycled Polyethylene Terephthalate (PET) flakes and a simple, easy-to-obtain manufacturing apparatus. With more and more specialty consumer products manufacturers launching new products, the need for custom-designed PET bottles is increasing. Therefore, we are going for small packaging manufacturer to obtain these bottles. Since the cost of entry is not great and the process is relatively simple, PET bottle manufacturing represents an exciting small business opportunity.
  23. 23. The steps in the process of manufacturing plastic bottles are given below: Step 1: We should obtain PET from a reliable supplier. PET is manufactured by polymerizing, or reacting, the chemicals terephthalic acid and ethylene glycol so as to produce pellets of a raw material called polyethylene terephthalate, which is abbreviated to PET. However, because PET is not biodegradable, it is possible to obtain raw PET for bottlemanufacturing from shredded recycled plastic bottles.
  24. 24. Step 2: Secondly, we should mold the raw PET pellets or recycled shredded PET into a preform, which resembles a test tube in appearance.This is done using either a separate preform molding machine or a combined one-step apparatus that includes the preform and final molding within one machine. We are using a combined one-step apparatus. Step 3: Thirdly, the mold is to be stretched. The preform is placed into a mold that corresponds to the shape of the bottle and is contained within the injection molding device. In some cases the original preform tube is cut into shorter lengths before being placed in the stretch-molding device. Hot, pressurized air is blown through a steel tube that pushes the heated preform tube against the mold so that crystallization takes place as the heated preformed PET is forcedto take the shape of the inside of the mold. Step 4: The bottles are then trimmed as necessary to remove excess PET, and then cooled with compressed air before they are either filled on-site or shipped to the location where they will be filled. Hot filling bottles are only possible when they will be used for the sale of foods of a certain degree of acidity, and this should be done only with proper equipment. Step 5: Finally the bottles are labeled as necessary once they are filled. Labels are produced with separate equipment and are not usually provided by PET bottle manufacturers unless the manufacturer also fills the bottles. Therefore, we are not labeling the product in the factory. 5.2 Fixed AssetRequirement S no. Description Unit Quantity Rate(Rs) Amount(Rs) 1. Land Ropani 1 48,00,000 48,00,000 2. Building Sq. ft. 7316 956.81 70,00,000 3. Plant and Machinery a) Extrusion line b) Cap Making Machine Set Set 1 1 12,00,000 7,00,000 12,00,000 7,00,000
  25. 25. c) Combination Mixer d) Generator Set Set 1 1 10,00,000 2,00,000 10,00,000 2,00,000 4. Furniture a) Big table b) Small table c) Chair Pcs Pcs Pcs 4 2 15 7,000 4,000 1,500 28,000 8,000 22,500 5. Vehicle Set 1 30,00,000 30,00,000 Total 1,79,58,500 5.3 Life of Fixed Assets  All depreciation will be calculated on the basis of straight line method.  The building is depreciated at the rate of 15% per annum and the life is estimated to be 25 years.  All the plants and machineries are depreciated at the rate of 20% per annum and are estimated to have life of 12 years.  All the furniture is depreciated at the rate of 20% per annum and is estimated to have life of 8 years.  The life of vehicle is estimated to be 10 years and is depreciated at the rate of 20% per annum. Life of Fixed Assets S No. Description Amount(Rs) Depreciation % Depreciation Amt(Rs) 1. Building 70,00,000 15% 10,50,000 2. Plant and Machinery a) Extrusion line b) Cap Making Machine c) Combination Mixer d) Generator 12,00,000 7,00,000 10,00,000 2,00,000 20% 20% 20% 20% 2,40,000 1,40,000 2,00,000 40,000 3. Furniture a) Big table b) Small table c) Chair 28,000 8,000 22,500 20% 20% 20% 5,600 1,600 4,500 4. Vehicle 30,00,000 20% 6,00,000 Total 1,31,58,500 22,81,700
  26. 26. Monthly Depreciation 1,90,142 5.4 Planned Capacityand Future Capacity The factory will be open from 9am to 6pm. Some of the raw materials used will be available in the local market whereas others will be imported from China. The company will only provide the wholesaler with an estimate of a monthly and yearly demand. The total number of working days will be 240 days. We have kept our capacity a bit large than what is required today but it is quite relevant in context to the increased demand in future since there are few competitors and we expect that the locally made plastic bottles will be widely used than those imported from abroad in future. Below is the calculation of future capacity utilization estimation: Future CapacityUtilization Year Capacity Utilization Sales (inqty) 2014 75% 4590 2015 80% 4896 2016 85% 5202 2017 90% 5508 2018 100% 6120 5.5 FactoryLocationand Layout
  27. 27. Location of the Factory – Dhulikhel, Kabhre
  28. 28. Factory Layout as prescribed by a technical engineer on Plastic Manufaturing Company of a US based company – Lienroc Plastics Manufacturing Company 5.6 Raw MaterialRequirement and cost Plastic bottles are formed using a variety of techniques. The various raw materials required for the production of plastic bottle are:  High Density Polyethylene (HDPE) is the most widely used resin for plastic bottles. This material is economical, impact resistant, and provides a good moisture barrier. HDPE is compatible with a wide range of products including acids and caustics but is not compatible with solvents. HDPE is naturally translucent and flexible. The addition of color will make HDPE opaque although not glossy. HDPE lends itself readily to silk screen decoration. While HDPE provides good protection at below freezing temperatures, it cannot be used with products filled at over 160 °F (71 °C) or products requiring a hermetic (vacuum) seal.  Low Density Polyethylene (LDPE) is similar to HDPE in composition. It is less rigid and generally less chemically resistant than HDPE, but is more translucent. LDPE is
  29. 29. used primarily for squeeze applications. LDPE is significantly more expensive than HDPE.  Polyethylene Terephthalate (PET, PETE or polyester) is commonly used for carbonated beverage, water bottles and many food products. PET provides very good alcohol and essential oil barrier properties, generally good chemical resistance and a high degree of impact resistance and tensile strength. The orienting process serves to improve gas and moisture barrier properties and impact strength. This material does not provide resistance to very high temperature applications—max. temp. 200 °F (93 °C).  Polyvinyl Chloride (PVC) is naturally clear, has extremely good resistance to oils, and has very low oxygen transmission. It provides an excellent barrier to most gases and its drop impact resistance is also very good. This material is chemically resistant, but it is vulnerable to solvents. PVC is an excellent choice for salad oil, mineral oil, and vinegar. It is also commonly used for shampoos and cosmetic products. PVC exhibits poor resistance to high temperatures and will distort at 160 °F (71 °C), making it incompatible with hot filled products.  Polypropylene (PP) is used primarily for jars and closures and provides a rigid package with excellent moisture barrier. One major advantage of polypropylene is its stability at high temperatures, up to 220 °F (104 °C). Polypropylene is autoclavable and offers the potential for steam sterilization. The compatibility of PP with high filling temperatures is responsible for its use with hot fill products. PP has excellent chemical resistance, but provides poor impact resistance in cold temperatures.  Polystyrene (PS) offers excellent clarity and stiffness at an economical cost. It is commonly used with dry products including vitamins, petroleum jellies, and spices. Styrene does not provide good barrier properties, and exhibits poor impact resistance.  Post Consumer Resin (PCR) is a blend of reclaimed natural HDPE (primarily from milk and water containers) and virgin resin. The recycled material is cleaned, ground and recompounded into uniform pellets along with prime virgin material especially designed to build up environmental stress crack resistance. PCR has no odor but exhibits a slight yellow tint in its natural state. This tint can be hidden by the addition of color. PCR is easily processed and inexpensive. However, it cannot come into direct contact with food or pharmaceutical products. PCR can be produced in a variety of recycled content percentages up to 100%.  Bioplastic- polymer structures based on processed biological materials rather than petrochemicals.
  30. 30. We have decided to choose the supplier low cost without compromising on the quality. The table below shows the total monthly raw material costs and estimated requirement for the company. The raw material quotation is forwarded to the wholesaler who stocks the goods according to the company’s requirement. Raw MaterialRequirement and Cost S No. Description Quantity Rate (Rs) Amount (Rs) 1. Polyethylene Terephthalate 765 pound 50 38,250 2. High Density Polyethylene 700 pound 46.75 32,725 3. Low Density Polyethylene 650 pound 45 29,250 4. Polyvinyl Chloride 675 pound 55 37,125 5. Polypropylene 500 pound 50 25,000 6. Polystyrene 500 pound 55 27,500 7. Post Consumer Resin 475 pound 55 26,125 8. Bioplastic 400 pound 60 24,000 9. Others 25,000 Total 2,64,975 5.7 Labor Requirement and Cost The business requires various types of laborers – skilled, semi-skilled and unskilled as well. Skilled laborers are required so that the plants and machineries can be handled properly and the production process can go smoothly. Semi skilled laborers are also required to assist the skilled ones in the minor activities. Similarly, unskilled laborers are also required to carry out other minor activities like gate keeping, security, etc. However, finding these various types of laborers would be difficult. Since the factory location is Dhulikhel, we plan to employ local laborers and if required, we will hire few from the valley as well.
  31. 31. The laborers will be given a proper work schedule which is to be followed strictly. One week training program will be conducted for the laborers. They are required to inform the management at least one month in advance before quitting the job. Labor Requirement and Cost S No. Description No. Rate(Rs) Amount (Rs) Total Amt (Rs) 1. Direct labor a) Skilled -Factory head -Technician -Others b) Semi-skilled c) Unskilled 1 1 2 8 5 12,000 15,000 10,000 6,000 4,000 12,000 15,000 20,000 48,000 20,000 1,15,000 2. Indirect Labor a) Production Manager b) Logistics Manager 1 1 20,000 12,000 20,000 12,000 32,000 Total 1,47,000 5.8 Labor Motivation The laborers will be given a proper work schedule which is to be followed strictly. One week training program will be conducted for the laborers. They are required to inform the management at least one month in advance before quitting the job. we will develop effective labor packages that will be designed by proffessional HR firms to motivate the workers. we will take careful measure regarding employee safety in the workplace, and equip our workers with all necessary materials and equipment. Extrinsic rewards will be our basic motivation factor under which we will provide enough monetary compensation to our workers. other benefits will also be
  32. 32. provided. we will employ proper work schedules, taking consideration to workers breaks to create a healthy working envoirnment within the factory 5.9 Indirect FactoryOverhead Indirect Factory Overhead Expenses (Monthly) S No. Description Amount (Rs) 1. Indirect labor 32,000 2. Refreshment 34,200 3. Electricity and Water 20,000 4. Repair and Maintenance 10,000 5. Transportation 15,000 6. Stationery 2,000 7. Warehouse expense 10,000 8. Others 10,000 9. Depreciation 1,90,142 Total 3,23,342 5.10 PerUnit Costof Production S No. Description Amount (Rs) 1. Monthly Raw Material Cost 2,64,975 2. Monthly Direct Labor Cost 1,15,000 3. Monthly Factory Overhead Expense 3,23,342 Monthly Total Cost of Production 7,03,317
  33. 33. Monthly Production 4590 units Cost of Productionper Unit 153.23 6.0 Product Design and Development Plan 6.1 Development Stats and Tasks 6.2Challenges andRisks Strengths  The strengths of this company is that it is relatively stable. Although the demand for manufacturing bottles tends to fluctuate with the ups and downs of the economy, it is characterized by regular periods of recovery following any downturns. Moreover, manufacturing plastic bottles has become highly efficient over the last century, with the ability to maximize both the productivity of the workers and machines to maximize profits. Weaknesses  A weakness of our firm is that much of it is built on the production of non-essential goods. This means that a severe downturn in the economy can have a crippling effect on it. Another weakness is that it is a mature industry. There is little room for growth. As a result, the manufacturing of the plastic bottles industry can be a cash cow for those who are already in it but may be unattractive to new entrants. Opportunities  Opportunities in this industry are in the technology and bio-technology areas. These are growing market segments with higher profit margins. Additionally, they are knowledge- dependent market segments that require highly specialized workers, which makes it difficult for low wage countries to compete in this market segment, thereby providing an edge to more industrialized countries. Foreign markets with a growing middle class are providing opportunities for technology and bio-technology manufacturers to increase their profitability through exports. Threats  The largest threats to this type of firm in developed nations are from low wage countries. The low wages of these countries have made it impossible for many businesses in developed nations to compete, requiring them to either close or move overseas to find
  34. 34. cheap labor.
  35. 35. 6.3 Intellectual Property 7.0 Management Team and Company Structure 7.1ManagementTeam This company will be managed under the partnership venture of Mr. Ayush Man Tamrakar, Ms. Jashmina Pradhananga and Ms. Arpana Pradhan. These three partners will be contributing on equal proportions. Ayush Man Tamrakar, President, has a 20 year history of experience encompassing all aspects of Polymer Raw material, Plastic Conversion Methods, and Venture Development. He has founded successful ventures in plastic converting industry, and assisted in the launch of five plastic converting manufacturing plants. Jashmina Pradhananga, Executive VP and COO, is a graduate Engineer with over 20 years and experience in the post- consumer plastics recycling industry and is the inventor of the primary cleaning and refining technology used in the process for this project. She has received a patent for her technology and has been directly involved in over twenty- five major post consumer plastics recycling projects. Arpana Pradhan, CFO, has over 30 years investment and merchant banking and management experience. She has assisted in raising over $500 million and served as board member in over 40 public and private companies. 7.2CompanyStructure
  36. 36. The organization will be managed by Ms. Jashmina Pradhananga, Mr. Ayush Man Tamrakar and Ms. Arpana Pradhan. Under them there will be different managers who will be directly reporting to them. Each manager will have their own department and will be responsible for their work. The organization chart is shown below: CentralOffice Production Department Sales and Marketing Department Accounting Department General Manager Production Manager Factory Head Assistant Factory Head Technical Head Logistics Head Warehouse Supervisor Sales and Marketing Manager Sales Supervisor Regional Sales Officer 1 Regional Sales Officer 2 Regional Sales Officer 3 Maketing Officer Account Head Assistant Accountant 1 Assistant Accountant 2
  37. 37. 7.3Preoperating Activities and Cost The following activities need to be done before the business can be operated: Registering the business ½ week Preparing the business plan 4 weeks Applying for the loan and approval 8 weeks Contacting equipment suppliers 2 weeks Constructing the factory 18 weeks Hiring the labor 2 weeks Installing the equipment 3 weeks Purchasing the materials 2 weeks Trial production 2 weeks The trail production has to be done to see how good the product comes out and whether there is any problem with the plan and the machinery or not. Moreover, we have to come out with the sample product in the market to see the response. All these costs are included in the pre operating cost. They are as follows: Description Amount Registration cost 7000
  38. 38. Trial Production 100000 Market Survey 10000 Transportation cost 5000 Telephone registration 4000 Others 5000 Total 131000 10% amortization 13100 Monthly Amortization 1091.67 7.4 Fixed AssetRequirement Asset Unit Quantity Rate Total GrandTotal Office Building Sq.ft 1500 14 21000 21000 Plant & Machinery Computer Telephone Calculator Generator Set Set Set set 3 3 3 1 25000 1000 30000 75000 3000 2400 30000 110400 Furniture Table Chairs Sofa Cupboard pcs 3 9 1 2 5000 1500 30000 10000 1500 13500 30000 10000 68500
  39. 39. Total 199900 Life of Fixed Assets for Office Assets Amount Depreciation % Depreciated amount Building 210000 15 3150 Plant and machinery Computer Telephone Calculator Generator 75000 3000 2400 30000 20 20 20 20 15000 600 480 6000 Furniture Table Chairs Sofa Cupboard 15000 13500 30000 10000 20 20 20 20 3000 2700 6000 20000 38930 Monthly 3244
  40. 40. 7.5Administrative Office Description Amount Telephone Bill 2000 Refreshment 30000 Accountant Salary 7000 Others 5000 Depreciation 3244 Amortization 1091.67 Total 48335.67 8.0 Financial Plan and Projections 8.1 Assumptions Sheet  Raw material stock for ½ month  Production time is 2 days  Finished goods stock is 5 days  Credit facility for debtors is for 10 day  Monthly marketing expense is Rs. 30,000/-  Cash management is one month expense on direct labour, factory overhead, marketing expense, and administrative expense  Bank loan of Rs. 1,20,00,000 at 15% interest rate per annum. The loan payback installment is Rs. 24,00,000 each year till 5 years.  Mark up is 15% and the tax rate is 25%
  41. 41. Total Capital Requirement The total capital requirement refers to the amount of money a business needs for its normal operations and also the amount of cash and easily liquidated assets that a broker/dealer or bank needs to meet SEC regulations, usually expressed as a proportion of total liabilities. In general, the kinds of assets that can make up the broker-dealer capital requirement are strictly defined. 8.2 Sources and Uses of Funds Statement 8.2.1.0TotalCapitalRequirement The total fixed assets requirement is: S No. Description Amount (Rs) 1. Fixed Assets for Factory 1,79,58,500 2. Fixed Assets for Office 1,99,900 Total Fixed Capital 1,81,58,400 8.2.1.1 Fixed Capital S No. Description Amt (Rs) 1. Raw material stock (for ½ month) 1,32,487.5 2. Work-in-process stock (153.23/2 * 2 days * 230 units) 35,243 3. Finished Goods stock (153.23 * 5 days* 230 units) 1,76,214.50 4. Credit Sales (153.23 * 10 days* 230 units) 3,52,429 5. Cash Management (1,15,000+30,000+(48,335.67-3,244- 1,091.67)+(323342-190142)) 3,22,200 Total 10,18,574
  42. 42. Cash Management = Monthly Direct Labor expense + Monthly Marketing expense + Monthly factory Overhead Expense + Monthly Administrative Expense Working Capital 8.2.1.2Working Capital 1. Working Capital 10,18,574 8.2.1.3 Pre-operating Expenses The trail production has to be done to see how good the product comes out and whether there is any problem with the plan and the machinery or not. Moreover, we have to come out with the sample product in the market to see the response. All these costs are included in the pre operating cost. They are as follows: S. No. Description Amount(Rs) 1. Registration cost 7,000 2. Trial Production 1,00,000 3. Market Survey 10,000 4. Transportation cost 5,000 5. Telephone registration 4,000 6. Others 5,000 Total 1,31,000 10% amortization 13,100 Monthly Amortization 1091.67 The pre-operating expense as previously calculated is Rs. 1,31,000. Thus, the total amount required to start the business is Rs. 1,31,000. Now the total project cost is:
  43. 43. TotalCapital Requirement S No. Description Amount (Rs) 1. Fixed Capital 1,81,58,400 2. Working Capital 10,18,574 3. Pre-Operating expense 1,31,000 Total Capital Requirement 1,93,07,974 8.2.2 CapitalStructure We have planned to take loan of Rs. 1,20,00,000 from Nepal Investment Bank Limited. This makes the loan constitute 62.15% of the total capital requirement. And the rest 37.85% will be invested by the three owners in equal proportion (that is Rs. 24,35.991.33 each). The capital structure is given below: Owner’s Equity 73,07,974 Loan 1,20,00,000 Total 1,93,07,974 8.3 Loan Repayment Schedule The loan is to be pain over period of 5years at an interest rate of 15% per annum. For the security of loan, the owners have a land and building with a valuation of Rs. 1,75,00,000 which will be kept as collateral for the loan from the bank. The loan repayment schedule is given as below: Year Loan Amount Payable Interest (15%) Principle Total Payment 1 1,20,00,000 18,00,000 24,00,000 42,00,000 2 96,00,000 14,40,000 24,00,000 38,40,000 3 72,00,000 10,80,000 24,00,000 34,80,000
  44. 44. 4 48,00,000 7,20,000 24,00,000 31,20,000 5 24,00,000 3,60,000 24,00,000 27,60,000 8.4 Selling Price S No. Description Amount (Rs) Amount (Rs) 1. Unit Cost of Production 153.23 2. Monthly Administrative Expense 48,335.67 3. Monthly Marketing Expense 30,000 4. Monthly Interest on Loan (15% of 1,20,00,000)/12 1,50,000 Total 2,28,335.67 Monthly Production Units 4590 units Per Unit Cost (2,28,335.67/4590) 49.75 Final Cost 202.98 15% Mark-up 30.45 Selling price per Unit 233.43 ~ 233 8.5 Income Statement Description Amt (Rs) Amt (Rs) Income from Sales (233 * 55080 units) 1,28,33,640 Less: Raw Materials (2,64,975 * 12) 31,79,700 Direct Labor (1,15,000 * 12) 13,80,000
  45. 45. Indirect Factory Overhead (1,33,200 * 12) + 22,81,700 38,80,100 Total 84,39,800 (84,39,800) Gross Profit 43,93,840 Less: Marketing Expense (30,000 * 12) 3,60,000 Administrative Expense (44,000 * 12) + 38930 + 13100 5,80,030 Total 9,40,030 (9,40,030) Earning Before Interest and Tax 34,53,810 Less: Interest expense (15%) (18,00,000) Earning Before Tax 16,53,810 Less: Tax (25%) (4,13,452.5) Earning After Tax 12,40,357.5 8.6 CashFlow Statement Description Pre-operating 1st year Cash Inflow Equity 73,07,974 Loan 1,20,00,000 Sales 1,28,33,640 Cash Sales 1,22,98,905 Total Cash Inflow 1,93,07,974 1,22,98,905 Cash Outflow Pre-operating expense 1,31,000 Purchase of Fixed Assets 1,81,58,400 Raw Material Cost 31,79,700 Direct Labor Cost 13,80,000 Factory Overhead Expense 15,98,400 Marketing Expense 3,60,000 Administrative expense 5,28,000 Increase in Inventory 3,43,945 Interest expense 18,00,000
  46. 46. Repayment of Loan 24,00,000 Tax 4,13,452.5 Total Cash Outflow 1,82,89,400 1,20,03497.5 Net Cash Flow 10,18,574 2,95,407.5 Cash balance in the beginning - 10,18,574 Cash balance at the end 10,18,574 13,13,981.5 8.7 Balance Sheet Description Pre-Operating 1st Year ASSETS Current Assets Cash 10,18,574 13,13,981.5 Inventory - 3,43,945 Account Receivables - 5,34,735 Total Current Assets 10,18,574 21,92,661.5 Fixed Assets 1,81,58,400 1,81,58,400 Less: Depreciation - (23,20,630) Net Fixed Assets 1,81,58,400 1,58,37,770 Pre-Operating Expense 1,31,000 1,17,900 Total Assets 1,93,07,974 1,81,48,331.5 CAPITAL AND LIABILITIES Long term loan 1,20,00,000 96,00,000 Owner’s equity 73,07,974 73,07,974 Accumulated profit - 12,40,357.5 Total Owner’s Equity 73,07,974 85,48,331.5 Total Capital and Liabilities 1,93,07,974 1,81,48,331.5
  47. 47. 8.8Returnon Investment 8.9 Break Even Point
  48. 48. 8.10 Projected Income Statement for 5 years Description 1st Year 2nd Year 3rd Year 4th Year 5th Year Capacity Utilization 75% 80% 85% 90% 100% Sales Forecast (in units) Total Sales Volume (Rs) Direct Cost (Raw Material and Direct Labour) (Rs) Indirect factory overhead(Rs) Total Production Cost(Rs) Gross Profit(Rs) Administrative Expense(Rs) Marketing Expense(Rs) Total Administrative and Marketing Expenses(Rs) EBIT(Rs) Interest expense(Rs) EBT(Rs) 25% Tax (Rs) EAT/ Net Profit (Rs) Accumulated Profit (Rs)

    Be the first to comment

    Login to see the comments

  • LawrenceAdamu

    Feb. 20, 2020
  • jecycableza

    Feb. 21, 2020
  • OindrilaDas9

    Feb. 22, 2020
  • LohithaMoramreddy

    Mar. 26, 2020
  • PinalMundhada

    Apr. 23, 2020
  • bedilubelay

    Apr. 23, 2020
  • Drwhyte1

    Apr. 25, 2020
  • DeeGovind

    Jun. 5, 2020
  • Fisehaseifu1

    Jun. 16, 2020
  • ChaceFraser

    Jul. 7, 2020
  • sandipcadd

    Jul. 18, 2020
  • RashidiTaiwo

    Jul. 24, 2020
  • TrinaSimms

    Oct. 2, 2020
  • JulietIdaraOluwatami

    Oct. 8, 2020
  • VirtueVentures

    Nov. 5, 2020
  • NafeesaArif1

    Nov. 19, 2020
  • KamilCiroCatacutan

    Jan. 17, 2021
  • ApehAgbo

    Mar. 19, 2021
  • EngMats

    Mar. 29, 2021
  • antenehmekuria1

    May. 8, 2021

Plastic Manufacturing Company - Business Plan

Views

Total views

78,323

On Slideshare

0

From embeds

0

Number of embeds

97

Actions

Downloads

2,862

Shares

0

Comments

0

Likes

87

×