Projector enclosures for staged events
Outdoor projector enclosures
Digital advertising is a form of electronic advertising using different mediums, for example AV
displays and projectors. These display the information, ads as well as other data. Commonly found
in both private and public locations from corporate buildings to shops.
weatherproof projector housings
Digital signage and projector protection
We have all seen the digital advertising posters which might be used indoors, being deployed
outdoors in protective, outdoor housings. These housings provide all of the essential protection
from the next thunderstorm - whether it's raining, snowing or sunny. A leading example was the
2012 London Olympics when 9 outdoor digital signage kiosks were supplied to the main sponsor
with the Olympics.
Before the Olympics in 2012 was the Queen's Diamond Jubilee Concert that had Buckingham
Palace illuminate with 36, 20,000 lumen projectors from Barco and it is partner.
As a way you can observe out of this example, technology has shifted!
Using 4K projectors being utilized for digital signage, they have a large investment up to $10K, are
you aware that 7000 lumens NEC range. While they are deployed in locations like train stations
and used as points of info they must be protected, to guarantee the hardware isn't getting
damaged and guarantee the ad campaign is often a success.
Outdoor projector enclosure
As possible understand, you have a very costly part of hardware, you will want to protect it, one of
the best options is usually to place the hardware in a protective housing, previously being
designed and produced by a well established enclosure manufacture who's projector housings are
manufactured from steel, welded for maximum strength after which powder coated to supply a
resilient outer coating.
The protective, projector enclosures come complete with a dual air conditioning that could
eliminate the air every 7 seconds within the protective housing, the outdoor, projector housing is
additionally fitted with thermostatic heater when the projector just isn't doing work in the tiny
hours also to keep condensation in the hardware.
The protective projector housing is secured with 2 high security locks as well as the viewing
window is 6mm thick, insulation could be fitted to the internal walls if required.
One of the unique points with the protective, projector housing is you don't need to open the
housing to update the information, this can be achieved, either remotely or by way of a
weatherproof USB port around the projector enclosure.
The present range of protective projector enclosures are around for projectors as much as 10,000
lumens, other projectors sizes can be obtained as custom units.