Successfully reported this slideshow.
We use your LinkedIn profile and activity data to personalize ads and to show you more relevant ads. You can change your ad preferences anytime.
Computer Building & Upgrades
Custom PC
Will be your computer not fast enough or too old?
What you need to know when buying...
Wherever you get your laptop or computer parts & accessories, be sure to shop around for the best
deals and get the design...
Make sure all components are at 70 degrees.
There are a few kinds of compatible computer systems (often known as PC's).
Th...
Older tower systems use a plastic cover on the back; you will have to pry them back having a
screwdriver first to get to t...
Upcoming SlideShare
Loading in …5
×

Computer building7

512 views

Published on

Custom PC, What you need to know when buying...., watercooling

Published in: Technology
  • Be the first to comment

  • Be the first to like this

Computer building7

  1. 1. Computer Building & Upgrades Custom PC Will be your computer not fast enough or too old? What you need to know when buying.... Maybe It is time to have an upgrade! You may also desire to make a new computer. My goal is to explain to you how you can build and/or buy some new own personal computer, with a fraction of what it might cost to purchase a completely assembled system from your leading manufacturer. I'd like to make some suggestions regarding which you could get the necessary parts to build your pc. Catalog ordering is a very fantastic way to get parts & accessories in most cases are going to friendly knowledgeable individuals to advise you regarding your purchase. Just be certain you handle a professional business. An execllent spot to go can be your local computer show. Many bargains are available there especially when you purchase with cash. You can even take a look at computer & electronic stores.
  2. 2. Wherever you get your laptop or computer parts & accessories, be sure to shop around for the best deals and get the designers written warranties. The tools you will want are 1 (one) Phillips and a couple of (two) Flathead non-magnetic screwdrivers. Before you start I must tell you just how electronic circuits are static sensitive so there are a few precautions you should observe. Keep circuit boards inside their antistatic bags until they're willing to be installed. Before handling components discharge your body's static electric charge by touching a grounded surface. The best way to try this would be to plug the pc case into an outlet and touch any unpainted area of the metal. When handling circuit boards. Feel, as this any components for the boards and connectors that plug in the expansion slots. Hold them by their edges and/or any metal mounting hardware on the circuit board. Never slide boards over any surface as they can sustain irreversible damage. Avoid plastic, vinyl, Styrofoam, furs and carpet within your office. You ought to wear a grounding wrist strap.
  3. 3. Make sure all components are at 70 degrees. There are a few kinds of compatible computer systems (often known as PC's). They are the following: Older models known as AT socket 7, and newer ATX slot 1 type models. The SOCKET 370 is another type which is analogous to look at towards the old socket 7 but with speeds well over 1 GHZ and beyond. Be sure to obtain a case, power source, motherboard and CPU which are appropriate for one another. Ask the sales person to make sure. OPENING True. In case you are upgrading your current system come up with a diagram from the contacts in the rear of the system unit so you can replace them correctly if you are finished. First you must ground yourself by touching the unpainted metal chassis. Then unplug the A/C electrical cord and any other cables which may be connected. By studying the back in the unit, locate approximately 6 screws for the outer edges and remove them.
  4. 4. Older tower systems use a plastic cover on the back; you will have to pry them back having a screwdriver first to get to the screws. To eliminate the top's on tower and mini desktop systems, slide the cover back or more. With an old desktop system, turn laptop computer around to handle you and slide the duvet forward. Try not to catch it onto any cables inside the system. Set the cover aside, keeping all screws together within a container. To reassemble, just reverse this action after replacing the necessary components. If you realise This informative article Useful, Please Hyperlink to It! Need to find out a little more about building and upgrading computers?

×