Successfully reported this slideshow.
We use your LinkedIn profile and activity data to personalize ads and to show you more relevant ads. You can change your ad preferences anytime.
Analysis of harmonic at different level
on distribution system ,its effect and
reduction by using appropriate filters
ANUJ...
4:Current and voltage distortion factor and their limit
Content
3: Harmonic Hazards
1: Harmonic Definition
2: Generation o...
WHAT ARE HARMONICS –
Harmonics are integral multiples of some fundamental frequency that, when added
together, result in a...
In fact, any function may be constructed from a
sine wave and some number of its harmonics:
Where do they come from?
The power company typically supplies a reasonably
smooth sinusoidal waveform:
Where do they come from?
...but nonlinear devices will draw distorted waveforms,
which are comprised of harmonics of the s...
Common sources of Harmonics
Lighting ballasts
UPS systems
M
AC and DC drives
IN SHREE CEMENT plant DRIVES are main source ...
In recent years, as rectifier, variable frequency speed control devices,
electric arc, electrized railway and all kinds of...
Harmonic Hazards
Power
Equipment
Products Money
expense
Safety
Harmonic
affects safety
operation of
production lines,
and ...
The direct effects caused
by harmonics
● Reactive power
compensator (TSC) can’t
switch on or capacitor
burnt.
● Harmonics ...
The direct effects caused
by harmonics
● Harmonic causes damage of control modules of numerical
control machine, PLC and h...
The direct effects caused
by harmonics
● Harmonic causes transformer overheat, big noise and even
burning; power cable ove...
The direct effects caused
by harmonics
● Harmonics will cause interference to adjacent communication
systems, it will make...
Harmonic-"Subtle Poison" in power
network
● Air pollution, water pollution etc, it can’t result in
dead immediately, but i...
Harmonic Distortion factors
• Harmonic Distortion is a mathematical way of describing how
non-sinusoidal a wave shape appe...
THD V
Individual distoration
limit
5
3
2.5
1.5
1.5
1
IEEE-519 voltage distortion limits
69 Kv and under 69000-161Kv 161 Kv...
IEEE-519 current distortion limits
Concerning current harmonic distortion,IEEE-519 defines the limits as a function of the...
Even harmonics are limited to 25% of the odd harmonic limits.
Current distortions that result in a DC offset (e.g., half-w...
Methods for Harmonic Mitigation
● large power electrical nonlinear equipments often requires
mitigation equipment in order...
● An LC circuit, tuned to each harmonic order to be filtered, is
installed in parallel with the non-linear load . This byp...
Active Power filter(APF)
● Active Power Filter Capabilities-
Eliminating Voltage and Current Harmonics
Reactive Power Comp...
Active Power filter
Study, analysis and reduction
of harmonics in unit-3 to unit-8
● We measured THD of values only on the cooler bas bar
(415...
Study, analysis and reduction
of harmonics in unit-7
Study, analysis and reduction
of harmonics in unit-7
THDv
(%)
THDi
(%)
Cur-
rent
(A)
Wire
CU
losses
(W)
THDv
(%)
THDi
(%)
...
Study, analysis and reduction
of harmonics in unit-7
THDv (%) THDi (%) Current(A) CU losses(W)
Lighting D.B. 5 6.533 60 81...
THD v R
THD v B
THD I Y
THD I AVG
0
10
20
30
40
50
60
70
LC-20
• Total CU losses=60921.8 W
• Total Cu losses per day=60921.8*24=1462.123
KWH per day
• 1KWH=3.5 RS
• Money loss due to Cu...
• Cost of filter to be- 15, 00,000 RS for rating of
400A
• Payback time=15, 00,000/23,030=57 month=
5 year 5 month
• Actua...
1. There will be no false tripping of circuit breaker, relay and fuses
due to harmonics.
2. Due to harmonics current wire ...
UNIT-3 to UNIT-8 Cooler bus (415 V)
Cooler pcc
Bus bar
UNIT-3 UNIT-4 UNIT-5 UNIT-6 UNIT-7 UNIT-8
THD v (%) 10.833 3.4 5.96...
Analysis of harmonic at different level on distribution system ,its effect  and reduction by using appropriate filters
Upcoming SlideShare
Loading in …5
×

Analysis of harmonic at different level on distribution system ,its effect and reduction by using appropriate filters

2,246 views

Published on

analysis of harmonic in cement plant in beawar & suggestion of filter at appropriate place in power system of plant

Published in: Engineering

Analysis of harmonic at different level on distribution system ,its effect and reduction by using appropriate filters

  1. 1. Analysis of harmonic at different level on distribution system ,its effect and reduction by using appropriate filters ANUJ ARORA IIT ROORKEE MENTOR-MR. ARUN AGARWAL
  2. 2. 4:Current and voltage distortion factor and their limit Content 3: Harmonic Hazards 1: Harmonic Definition 2: Generation of harmonics 5:Methods for Harmonic Mitigation Study, analysis and reduction of harmonics in unit-3 to unit-8 6:
  3. 3. WHAT ARE HARMONICS – Harmonics are integral multiples of some fundamental frequency that, when added together, result in a distorted waveform. • superimposed on fundamental • produced by non-linear loads • named by order number "n Harmonic Definition Example: In a 50 Hz electrical system, 150 Hz is the 3rd harmonic, 250 Hz is the 5th harmonic, and so on. harmonics distorted wave fundamental
  4. 4. In fact, any function may be constructed from a sine wave and some number of its harmonics:
  5. 5. Where do they come from? The power company typically supplies a reasonably smooth sinusoidal waveform:
  6. 6. Where do they come from? ...but nonlinear devices will draw distorted waveforms, which are comprised of harmonics of the source:
  7. 7. Common sources of Harmonics Lighting ballasts UPS systems M AC and DC drives IN SHREE CEMENT plant DRIVES are main source of harmonic.
  8. 8. In recent years, as rectifier, variable frequency speed control devices, electric arc, electrized railway and all kinds of power electric devices are being widely used in power grid, the power quality is becoming more and more poor than before because of non-linear, impact and unbalance caused by these loads.Now the harmonic pollution is the main reason of poor power quality. The Generation of Harmonic Ferromagnetic Satuation Type: Transformer, Reactor, Mutual inductor etc. Solid State Switch Type: Rectifier, inverter etc. The harmonic is mainly related to rectifier pulse. 6-pulse generates 6K±1 harmonic, 12-pulse generates 12K±1 harmonic. Electric Arc Type: Electric arc furnace, metal melting device, welding machine etc, harmonic change very fast.
  9. 9. Harmonic Hazards Power Equipment Products Money expense Safety Harmonic affects safety operation of production lines, and then cause product quality problems, such as Paper production, textile, semiconductor etc. Capacitor Aging, Reactor burning, motor damage, transformer overheating, communication device damage and power cable aging etc. Harmonic increases line loss and transformer design capacity, and then cause extra electricity bill and equipment cost. Harmonic results in misoperation and failure operation of protection relays, and then the control cabinet can’t work normally; there are potential safety hazards of harmonic resonance and fire
  10. 10. The direct effects caused by harmonics ● Reactive power compensator (TSC) can’t switch on or capacitor burnt. ● Harmonics will cause parallel resonance and series resonance in power grid, it will magnify harmonic, which result in bad power accidents.
  11. 11. The direct effects caused by harmonics ● Harmonic causes damage of control modules of numerical control machine, PLC and home appliance and office appliance.
  12. 12. The direct effects caused by harmonics ● Harmonic causes transformer overheat, big noise and even burning; power cable overheat and aging.
  13. 13. The direct effects caused by harmonics ● Harmonics will cause interference to adjacent communication systems, it will make communication devices generate noise, reduce communication quality, and even result in data lost.
  14. 14. Harmonic-"Subtle Poison" in power network ● Air pollution, water pollution etc, it can’t result in dead immediately, but its threaten always exists, so, the harmonic pollution to power grid is like environment pollution to human, it is subtle poison.
  15. 15. Harmonic Distortion factors • Harmonic Distortion is a mathematical way of describing how non-sinusoidal a wave shape appears. • THD v for voltage harmonics and THD i for current harmonic measurement.
  16. 16. THD V Individual distoration limit 5 3 2.5 1.5 1.5 1 IEEE-519 voltage distortion limits 69 Kv and under 69000-161Kv 161 Kv and above Current and voltage distortion limit
  17. 17. IEEE-519 current distortion limits Concerning current harmonic distortion,IEEE-519 defines the limits as a function of the ratio between the short-circuit current at the PCC ( Isc) and the average current corresponding to the maximum demand during a period of 12months (IL).
  18. 18. Even harmonics are limited to 25% of the odd harmonic limits. Current distortions that result in a DC offset (e.g., half-wave converters) are not allowed. IEEE-519 practically establishes a joint involvement of the customer and the electric company to maintain harmonic distortion levels within limits that will enable the power distribution systems to operate within safe voltage distortion limits. The most widespread standards for harmonic control worldwide are due to IEEE in the U.S. and IEC (International Electrotechnical Commission) in the European Union.
  19. 19. Methods for Harmonic Mitigation ● large power electrical nonlinear equipments often requires mitigation equipment in order to attenuate the harmonic currents and associated voltage distortion to within necessary limits. ● There are two types of filters: Passive filters Active filters
  20. 20. ● An LC circuit, tuned to each harmonic order to be filtered, is installed in parallel with the non-linear load . This bypass circuit absorbs the harmonics, thus avoiding their flow in the distribution network. ● The passive filter is tuned to a harmonic order close to the order to be eliminated ● Passive filter easily effected by load impedance and can be damage if its overload and its require floor area that is 3 time large than Active filters so people prefer active filter over passive filter. Passive filters
  21. 21. Active Power filter(APF) ● Active Power Filter Capabilities- Eliminating Voltage and Current Harmonics Reactive Power Compensation ( power factor improvement) Regulating Terminal Voltage Compensating the Voltage flickering ● Active filter uses harmonic reduction techniques to improve the quality of power, by injecting equal current or voltage distortion into the network but in opposite magnitude, which automatically cancels the actual distortion presented in the circuit and it utilize fast-switching insulated gate bipolar transistors (IGBTs) bridge
  22. 22. Active Power filter
  23. 23. Study, analysis and reduction of harmonics in unit-3 to unit-8 ● We measured THD of values only on the cooler bas bar (415 Volt) of all unit because mainly all the VFD or drives are present at the cooler pcc. ●All THD are in %(percentage) , current in ampere and losses in Watt. ● In many of A.C. drive and all d.c. drive because of their low frequency ALM-35(harmonic measurement meter) can’t measure THD V and THD i . it only work in range of 40 to 50 HZ.(It represent by - in table)
  24. 24. Study, analysis and reduction of harmonics in unit-7
  25. 25. Study, analysis and reduction of harmonics in unit-7 THDv (%) THDi (%) Cur- rent (A) Wire CU losses (W) THDv (%) THDi (%) Curr ent (A) CU Wire losses (W) Motor Losses (W) Motor +wire CU Looses (W) FN-8A 5.76 38.1 225 312.8 12 28.2 245 585.2 2481.3 3379.5 FN-9A 5.56 36.3 270 328 14.43 6.16 273 1062 2110.6 3500.6 FN-10 5.53 40.8 180 300.3 13.8 15.9 160 777.2 1305.6 2383.1 FN-11 5.46 58.5 65 39 - - 105 306.6 992.25 1337.8 FN-12 5.26 39.7 190 334.5 12.16 4.86 270 2027 3013.6 5375.5 BOOSTER FAN 7.33 39.03 200 360 7.9 1.86 250 1875 2583.7 4818.7 Kiln M.D. 6.2 62.4 580 2523 - - 500 1125 25000 28648 GRATE-1 4.8 60 50 72 - - 55 183.9 248.05 503.95 GRATE-2 4.9 70 45 46 - - 50 139.1 187.5 372.65 Before DRIVE After DRIVE
  26. 26. Study, analysis and reduction of harmonics in unit-7 THDv (%) THDi (%) Current(A) CU losses(W) Lighting D.B. 5 6.533 60 81.9 Welding D.B. 5.4 13.733 15 1 Cooler APFC 7.733 44.766 580 1009.2 Cooler transformer with APFC OFF 4.333 13.66 1500 5015.25 Cooler transformer with APFC ON 7.133 28.1 1420 4494.56 NOTE-1. We found out that after use of APFC electricity bill is decreased but harmonic contents is increase its means APFC is actually enhancing harmonics by decrease impedance for harmonics voltage. 2. If we use filters as place of APFC than along with power factor improvement it’s also decrease harmonic contents.
  27. 27. THD v R THD v B THD I Y THD I AVG 0 10 20 30 40 50 60 70 LC-20
  28. 28. • Total CU losses=60921.8 W • Total Cu losses per day=60921.8*24=1462.123 KWH per day • 1KWH=3.5 RS • Money loss due to Cu losses =5117 RS per day • If we use filter at the cooler bus pcc than we can save 15% losses due to harmonics • Saves money per day if we use filters=5117*0.15=767.61 Rs per day • Saves money per month if we use filters=23030 RS
  29. 29. • Cost of filter to be- 15, 00,000 RS for rating of 400A • Payback time=15, 00,000/23,030=57 month= 5 year 5 month • Actually after use of harmonic filter power factor also increase upto 0.98 so if we use harmonic filter then there will be no need of APFC .so we can implement this APFC to another place. • APFC cost=5, 70,000 RS • PAYBACK TIME=(15,00,000 - 5,70,000)/23,030 =3 YEAR 4 month
  30. 30. 1. There will be no false tripping of circuit breaker, relay and fuses due to harmonics. 2. Due to harmonics current wire is overloaded and their temperature increase upto 10 degree C above their normal temperature due to this insulation life decrease upto 50% in motor actually after use of active we increase insulation life of motor and decrease the current in wires so losses also decrease. 3. Power factor improve upto 0.98. Remark- For remove harmonics and decrease losses in wire, motor and transformer harmonics Filter of 400 A suggested at the cooler bus bar. And along with this there are other benefits of use the active filters –
  31. 31. UNIT-3 to UNIT-8 Cooler bus (415 V) Cooler pcc Bus bar UNIT-3 UNIT-4 UNIT-5 UNIT-6 UNIT-7 UNIT-8 THD v (%) 10.833 3.4 5.966 6.7 7.133 6.4 THD i (%) 48.866 7.533 16.1 21.166 28.1 18.466 ● UNIT-3 and UNIT-7 have THDv and THDi very high. ● So firstly we will have to implement Active filter at Cooler pcc bus bar of unit-3 and unit-7.

×