2. Mild steel consist of iron alloyed with less than
0.3% carbon , most commonly between 0.1 to
0.25%. The building industry frequently uses mild
steel in construction because of its ductility and
malleability.
MILD Steel frame usually refers to a building
technique with a "skeleton frame" of
vertical steel columns and horizontal beams,
constructed in a rectangular grid to support
the floors, roof and walls of a building which
are all attached to the frame. The
development of this technique made the
construction of the skyscraper possible.
4. MILD STEEL PLATES are made
by using high grade raw
material which provides them
properties like resistance from
corrosion and high durability.
Widely demanded in the
market . These mild steel plates
are available in various sizes in
the market.
Properties :o
o
o
o
o
Solid strength
Rust free
Abrasions resistant
Long lasting
User friendly
5. The cup locks are hired on rent for construction of
residential, commercial and industrial sites. Cup lock
can be erected for straight, curved and circular
configuration for both access and support.
Simplicity and strength :
Beside this , if we discuss about its strength and
simplicity, then we find that it lies in the node point
or fastening method. Moreover, four horizontal can
be fastened at one time making a very rigid
connection.
6. Locate the blade end of
horizontals into lower
Tighten with a hammer blow
Lower the upper cup
down
A positive and rigid connection of
four units is achieved in one single
action
7. STANDARD SIZES : -MEMBER
STANDARD SIZE AVAILABLE
( in meters )
3m
VERTICAL
2.5 m
TOTAL WEIGHT
( in kilograms )
13.5 kg
11.25 kg
9 kg
1.5 m
7 kg
1m
4.5 kg
2m
HORIZONTAL
2m
7 kg
1.5 m
5 kg
1.2 m
4 kg
1m
3.5 kg
11. Props are also available on
rent. They are generally hired
for construction of building,
industrial buildings, sites etc.
Props are one of
the economic method. They
help to support for all kinds of
form work, slabs, beams, wall
& columns. Also used for a
wide variety of applications in
general building construction
and repair work. Props
eliminate the costly labour.
Sizes of props available are
(2+2 m) (2+3 m).
12.
The high tensile steel pin is located through
a slot in the outer section and a hole on
the inner section for coarse adjustment.
The cast collar located below the pin gives
fine adjustment for lending and striking.
A self cleaning device on the collar nut,
which automatically clears the thread of
concrete, and dirt where the nut is rotated
thus assuring quick and easy adjustment.
A hole boss on the collar nut which makes
it easy to turn in confined spaces. By
inserting a bar in the hole.
Base plates and head plates are holed for
use with slab from work.
TPI ACME square thread ensure load
bearing strength at this critical point.
13. ADJUSTABLE TELESCOPIC PROPS SPECIFICATION
NUT
Malleable casting
Top Plate
150 x 150 or 100 x 300 x 5
mm Thick Plate
Base Plate
150 x150 x 6 mm
SIZES AVAILABLE
Prop Size
CP-1
CP-2
CP-3
CP-4
Height (mtr.)
Closed
Extended
1.5
2.75
2.0
3.25
2
3.75
3
4.75
14.
15. REPLACING
Wooden vertical
members ( known as
ballies) used as a frame
structure in building
construction
MILD STEEL
vertical
member( known as a
props) used as frame
structure in building
construction
16. WOODEN BALLIES
MS PROPS
• Wooden Ballies decay due to
termites .
• MS Props are termites free.
• It cannot be used as long lasting
frame structure.
• It can be used as long lasting frame
structure.
• It can be crack.
• There is no cracking.
• They are not in proper shape
although they are not straight.
• They are in proper shape and are
straight.
• It need maintenance.
• It need less maintenance .
17. U-JACK
Jacks are given on rent and
for construction of residential,
commercial and industrial
sites. These high quality jack
provides a method of
adjustment. These are hence
used at the top or bottom of a
scaffold support structure.
They are available as per
international standard. Also
available with best durability
and corrosion free range.
18.
19. SIZES AVAILABLE
Length (in feet)
2.5', 3', 4'
Thickness (in mm) 4, 4.5, 5, 6, 8
Width (in mm)
24, 25, 28, 30
Shuttering clamps and
column is the product
which is being fabricated
with different
specification and based
on the demand of the
customer . The raw
material used is of high
quality and specifically to
match with the
requirement of the client
depending upon the
actual utility of
the shuttering clamp and
Colum clamps.
20.
Acrospan are basically
manufactured out of
sheet that is Lattices of 10
mm dia bar, main bar 14
mm dia, bearing angle 75
x 75 x 10 mm. There exist
one number of eye bolt
with additional angle
stiffener welded to the
sheet and bearing angle
from inside. They are
made of high quality raw
material. Available as per
international standard.
21. ADJUSTABLE TELESCOPIC SPAN S SPECIFICATION
Prop Size
Extension (mtr)
Min.
Max.
ES0-ES1
1.75
2.70
SO ESI
2.40
3.45
SO-S1
2.40
4.10
SO-S1
3.0S
4.7
SIZES AVAILABLE
Allowable Span for centre line spaning
Slab
Thickness
300mm
600mm
900mm
1150mm
100
8000
5630
4600
4000
115
7800
5500
4450
3850
125
7550
5300
4300
3750
150
7100
6700
4050
3550
22. Channels are generally used for supporting the
structure. They are available in varied shapes , sizes
and length. Also available in roll formed metal.They
are also known as angles.
Different types of channels are:
L – channel
T – channel
C-channel
23. THESE MILD STEEL L – channels are STEEL ANGLE
DESIGNATIONS.
But commonly known as angles.
Thickness
L = Angle Designation
4 x 4 = Size of the legs (inches)
1/2 = Thickness of the legs (inches)
(note:- legs can be equal or unequal
size
24. • Uses
Truss members, Bracing, Lintels
etc.
•Designation
C 9 x 13.4
C = channel Designation
9 = Nominal Depth ( inches)
13.4 = weight / ft
25. These mild steel I – channels are the WIDE
FLANGE.
But commonly known as GATTER.
• Size Range
Depth; 10.16 cm to 101.6 cm
• Uses - Beams & columns
• Proportions - Shape
Tall & narrow – Beam
Square – Columns & Piles
26. Prop Size
Verticles
Horizontals
Size
Extension (mtr)
40 MM NB B Class
Tube
40 MM NB B Class
Tube
1500 x 1200 MM
2000x 1200 MM
2400 x 1200 MM
H - Frame Scaffolding
System is the one of the
most consuming allied
product of Steel
scaffolding system in
building construction line.
The uses are multiple to
support Beams, Slab,
Staging of Bridges,
storage of building
material. and easy
movement on the top of
the work place by labor
and engineers. H frame
system is Light weighted
and easy in transportation
with longer lasting in uses.
27. Joint pins are used for building
construction. They are hired for
construction of residential,
commercial and industrial sites.
Actually, they are internally
connected and allow ease of
joining. Beside this, available in
small size.
These joint pins are important
part of scaffolding network
because individually they are
able to support structures up to
multi stories. Joint Pins are
fittings that are designed with
the utilities.
28. The couplers or clamps are
available on rent. Used for
construction of industrial
building, sites etc. Couplers
are provided in various
types like:
#Pressed Double Coupler,
Pressed Swivel Coupler,
Dual Purpose Double
Coupler etc.
All these are made with
high grade raw materials.
29. Pressed Double
Couplers is exclusively
used for joining 40 mm
NB tubes at 90
degrees angle to
other tubes, ledgers or
props whereas
Pressed Swivel
Coupler is used for
connecting 40 mm NB
tubes at any angle
other tubes, ledgers or
props for diagonal
bracing.
30. Mild steel pipes are
available on rent and
hire for construction in
different buildings. mild
steel pipes is flawlessly
designed in tubular
forms. Available in
diverse dimensions. As
such, they are also
offered as per the
specifications and
demands of clients.
31. Rust Resistant
• Abrasion resistant
• Tensile strength
• Temperature Tolerance
• Durable and long lasting
•
32. Steel Challis (khapeda) are
widely used in India and are
fabricated from square
specially designed for
providing safe platform with
proper placement & support.
Steel Challis are available in
different sizes. MS Square Pipes
helps to provide a perfect
platform in construction work.
It is a platform on which one
can sit and work. It is of 2 m
length and 18” wide. They are
made of square pipes.
