Successfully reported this slideshow.
4648 S. Old Peachtree Rd. | Norcross, GA 30071    800.646.3826 (p) | 770.908.2264 (f)                                     ...
www.imetco.comR0311
The Test of Time  Ti m e l e s s e l e g a n c e , p r o v e n p e r f o r m a n c e ,   strength and versatility make Ser...
Long Panels                                                                                                               ...
Re-roofingwith Series 300                                                                Series 300 brings the advantages ...
Series 300 Testing                                                                                                        ...
Wind Uplift AnalysisIMETCO provides metal roofingsystems that are engineeredto the unique needs of each                   ...
Specify                                                                                                                   ...
Ridge/hip Trim                                                                               Butyl Sealant Tape,          ...
CL                                                                                                                        ...
Don’t Forget the WallsIMETCO’s roofing systems arecomplemented by our full line ofmetal wall and soffit panels. Contactyou...
The Total Solution  IMETCO offers a full line of metal  roofing, wall, and edge systems  and accessories. Be sure to  ask ...
Upcoming SlideShare
Loading in …5
×

Series 300 metal_roofing_from_imetco-brochure-2011

993 views

Published on

Product brochure for IMETCO Series 30 0metal roofing system, featuring logo design, copy writing,

Published in: Business
  • Be the first to comment

  • Be the first to like this

Series 300 metal_roofing_from_imetco-brochure-2011

  1. 1. 4648 S. Old Peachtree Rd. | Norcross, GA 30071 800.646.3826 (p) | 770.908.2264 (f) –1– www.imetco.com
  2. 2. www.imetco.comR0311
  3. 3. The Test of Time Ti m e l e s s e l e g a n c e , p r o v e n p e r f o r m a n c e , strength and versatility make Series 300 the metal roofing system of choice. For more than 20 years, the Series 300 ® standing seam metal roofing system has been protecting buildings across North America. After two decades, even the earliest Series 300 roofs are as resilient and beautiful as ever. The remarkable Series 300 structural panel adds dynamic visual impact while providing decades of protection from even the most severe weather conditions, with a total life-cycle cost that is significantly less than that of other roofing systems. With its zeal and reputation for excellence, the IMETCO team is dedicated to offering a level of service and support that exceeds expectations. Since your satisfaction is our only measure of success, we strive for accuracy, quality and unprecedented service on every order. –3–
  4. 4. Long Panels When your project calls for long panels, rely on the experts. IMETCO’s logistics specialists can coordinate transportation of panels up to 85 feet in length, allowing you the convenience and cost benefits of factory-formed panels for a Curving wider range of projects. When it comes to curving, no one does it better than IMETCO. The first to curve a symmetrical seam structural panel, IMETCO can achieve the tightest curves in the industry (having curved to radii as tight as 5’) and minimize oil-canning. Tapering We continue to raise the standards With Series 300, your tapered metal roof for performance and design flexibility design will achieve the stunning visual of metal roofing through ongoing Field Forming and Curving impact desired. Our dedicated manufacturing, product development. Recently, IMETCO’s field formed panels offer the engineering, and project management teams IMETCO celebrated two ground- same warranted, tested, and proven work closely with designers and contractors breaking achievements in Series 300 performance as those manufactured in to address installation panel curving: A concave curve; and our plant. challenges, reduce waste, a continuous, smooth concave-to- and provide panels convex “S” curve. Our full-service factory-quality forming that are custom- equipment features 16 roller stations. tapered for a These extraordinary It is shipped with a de-coiler to your job perfect fit. S-shaped panels site on a 45-foot trailer, and operated are truly a sight on-site by our fabrication experts. IMETCO factory- to behold as your forms each tapered eye travels along panel, which may the reverse-curve exceed 80-feet radius and continues in length, from seamlessly along the a single piece of tangent to the standard convex curve. metal, with stiffening beads adjacent to Whether manufactured in our factory the vertical legs, to and shipped to you, or field curved preserve the flat, on the job site, IMETCO’s curving clean look of the capabilities are unsurpassed. Contact your IMETCO representative for panel’s center. more information. www.imetco.comR0311
  5. 5. Re-roofingwith Series 300 Series 300 brings the advantages of symmetry to architects, installers and building owners alike. With vertical legs that are equal in both size and profile, and a separate seam cap that joins the panels, Series 300 can be installed starting from any point on the roof to produce a sleek, balanced, proportional look that complements any design. Installers have better control over when and where panels are installed, and can even run simultaneous crews to cutSeries 300 completion time in half.is ideal foralmost any Since there are no interlocking male/female seams to worry about, Series 300 panels can be installed in either, orretrofit or roof both, directions at any time. With this innovative systemreplacement design, roof protrusions and other detail work will notapplication, disrupt installation. Crews can simply move around theregardless of obstacle and continue working, then return to insertexisting roof condition or type. missing panels later.As an economical alternative to replacing an entire roof, The seam cap features , with its factory-appliedSeries 300 can be installed directly over the existing roof. hot-melt sealant, is quickly and mechanicallyThis eliminates the cost and environmental impact of seamed. IMETCO’s seamer permanently seals thetearing off and disposing of the old roofing materials, while caps at a rate of 60 feet per minute, and runs in both directions. This eliminates the needproviding: for a third crew member to chase and retrieve• Long-term weather-tight performance the seamer after each course is run.• An absolutely stunning architectural enhancement Series 300 also reduces material waste• Additional insulation to improve energy efficiency since each piece of a cut panel can be used for the opposite sides of a detail• Uninterrupted access condition. to your building Perhaps the most compelling advantageIn many cases, very of a symmetrical metal roof is that symmetry simplifies repair. In the eventfew modifications are that a Series 300 panel needs to berequired to prepare the removed or replaced, ONLY that panelexisting roof to receive needs to be removed or replaced – notthe new metal panels. every other panel between it and theTo make replacing roof’s edge. And while Series 300your roof as painless outperforms any other metal roofingas possible, IMETCO panel available, its symmetry providesoffers engineering peace-of-mind to building owners,services, framing designers and installers who are preparedassemblies, and for any contingency.installation support. –5–
  6. 6. Series 300 Testing MIAMI DADE COUNTY APPROVEDNo matter where your project is located, or which conditions it will encounter, each of the following tests is an important measure of metal roofing systemperformance. UL ASTM ASTM FM® TAS TAS ASTM AAMA TAS ASTM TAS 114 UL TAS ENCON Conditions/Components Tested 580 E-1592 E-1680 4471 201 203 E-1646 501.1 100-95 E-2140 (APP G) 263 125 CN 240 Actual edge components (flashings & trim)    Actual field penetration details ** Panel end laps   Tests to failure    IBC wind uplift requirement* * * Utilizes dynamic loading    Thermal expansion/contraction    Clip wear resistance  Foot traffic resistance  Impact resistance  Vertical load resistance    Energy efficiency  Moisture control     Climate-Related Performance Wind         Rain       Snow     Fire   Tornado    Thunderstorm           Hurricane          Hail     Heat/cold variations    2” Small No leaks Up to .001 Up to No leaks No leaks Up to Up to & large +/- 130 Up to Up to movement Series 300 results Class 90 at Class cfm/sf @ for 6 for 168 Class A for 280 psf missile psf 70 mph 120 mph hours 360 psf 100,000 20.0 psf 1-150 20 psf hours rating impact cycles * International Building Code (IBC) requires wind uplift testing in accordance with UL 580 and/or ASTM E1592. Check with your IMETCO representative to determine which test is applicable to your project. ** Testing of field penetration details is optional. Series 300 has been tested with actual field penetration details. www.imetco.comR0311
  7. 7. Wind Uplift AnalysisIMETCO provides metal roofingsystems that are engineeredto the unique needs of each Performance-Inspired Metal Roofingproject, bringing the designer’svision to life. The process begins Day after day, roofs are assaulted by rain, snow, heat, wind and otherwith a Wind Uplift Analysis environmental attacks. A Series 300 system, with its lasting resilience,for each individual structure, shields its building from these unforgiving conditions and providesconducted by IMETCO’s engineers. building owners with a lifetime of protection for their investment.This analysis follows the AmericanSociety of Civil Engineers (ASCE 7) The precision engineering of a Series 300 roof delivers long-termstandard, Minimum Design Loads for weather-tight performance with Triple Threat Protection™Buildings and Other Structures, to against water infiltration from ponding/standing water, dailydetermine a building’s design wind loads. rainfall, and wind-driven rain. It has been rigorously tested to be leakproof and to withstand hurricane-force winds.The Wind Uplift Analysis considers astructure’s geographic location, mean roof As part of the Series 300/Perfrom-A-Deck assembly, theheight, roof pitch/geometry, exposure condition, system is engineered and tested as recommended byoccupancy class, and other factors that impact the FEMA 361 Design and Construction Guidance forwind load capacity. Armed with these results, Community Safe Rooms for resistance to wind upliftdesigners can specify the right roofing system for and impact from wind-borne debris.their project every time, assured of compliance withthe International Building Code (IBC). An ideal system for structural and/or architectural applications, Series 300 features a 2⅜-inch high symmetrical seam with a separate, easy-to- install seam cap.Unlimited Thermal Movement andWatertight Performance Series 300 can span across open purlins and carry snow and wind loads on slopes asThe dynamic nature of a metal roof is embraced and facilitated moderate as ¼:12. It can also be installedby the Series 300 system. The one-piece clip, isolated seam over any solid deck, on steeper slopes, andsealant, custom trim, flashing, and system details all work even vertically as a wall panel.together to accommodate thenatural expansion and Series 300’s uniquecontraction of metal one-piece concealedthat occurs when clip, made of heavyit is exposed to 16-gauge galvanizedvarying temperatures. or stainless steel,Each Series 300 roof is is designed toengineered for unlimited provide maximumthermal movement to maintain the structural integrityroof’s structural integrity and provide a while allowing unlimitedlifetime of watertight protection. thermal movement. The clip also elevates the panel 3/8-inch off the substrate to allow for air movement. –7–
  8. 8. Specify 1 3/4" 2" 1" 2" Shop Drawing and Submittal Packages Erector note: A thoroughly engineered shop drawing package is Fix panel to clip at this location. Refer to the installation detail. crucial to the success of every project. In addition Refer to sht #? In the 11" x 17" shop dwgs. to the standard details that are available for use Underlayment by designers, IMETCO offers shop drawings that are produced in-house by IMETCO engineers and Substrate Fasteners Fixed Ridge/Hip Detail Arch. Ref.: None customized to the unique requirements of your project. This helps simplify and expedite resolution of any design challenge you may face during project planning and installation. These comprehensive, Ridge/hip trim Ridge/hip trim engineered packages help ensure optimum product performance, proper installation, and code IMETCO’s O -set cleat O -set cleat PerformaEdge Coping compliance, thereby reducing potential liability Valley pan Continuous Continuous butyl sealant tape butyl sealant tape for design professionals, installers, and building owners. Head closure Head closure (factory-formed) (factory-formed) Reference pt. Neoprene Neoprene Shop drawing packages address myriad design and head closure head closure (factory-formed) (factory-formed) Reference pt. Reglet liability considerations, such as: Corner ange Rod & caulk • Wind uplift requirements Counter- panel 1" 1" panel ashingseam cap seam cap • Water control, drainage and run-off Turn up valley panel edge inside vertical Rod & Caulk Fastener Continuous Continuous @ 24" o.c. sealant bead sealant bead • Ice damming panel seam. Fastener Sealant bed • Snow retention @ 12" O.C. Jamb 3" Edge of trim x 10-0" Exploded assembly view Exploded assembly view • Watertight details Valley pan Counter ashing Series 300 • Thermal movement allowances gable clip Fastener Jambclip @ each Trim He Edge of • Aesthetic considerations • Proper product installation Valley closure w/neoprene washer Leg cleatSeries 300 x 10-0" Pop-rivetGable Clip @ 12" o.c. Head assemb Edge of ice And water shield • Coordination of transitional conditions Fastener At Each Clip and adjacent building materials Isometric @ short wall Plywood substrate • Building code compliance Fasteners • Optional P.E. stamping (available for any state) Jamb detail @ sloped roof Arch. Ref.: None Each shop drawing package also includes detailed, Substrate illustrated step-by-step installation guidelines, Fasteners helping installers ensure a quality, expeditious installation while limiting liability. Jamb detail @ sloped roof Arch. Ref.: None www.imetco.comR0311
  9. 9. Ridge/hip Trim Butyl Sealant Tape, Install Continuously O -set Cleat Seam Cap Panel Clip Panel The Total Package Series 300 is more than just a metal panel. It is a total metal roofing solution, complete with all of the support you need to design and install a high-performance Series 300 metal roof. IMETCO’s engineering team helps bring your design concepts to life with custom-tailored and engineered metal systems. As your metal roofing partners, our field service representatives Factory injected Factory injected and inside service teams provide collaborative support hot melt sealant beads Continuous butyl sealant tape Continuous butyl sealant tape hot melt sealant beads throughout all phases of your project to ensure budget- O -set cleat O -set cleat Stainless steel fasteners Stainless steel fasteners (By erector) typ. and code-compliance with IMETCO’s durable, high- (By erector) typ. Ridge/hip trim Ridge/hip trim performance metal systems. For each individual Series 300 application, IMETCO evaluates an array of variables to help you determine Field bend pan using Field bend pan using product and installation requirements. From curving pan-end tool supplied by pan-end tool supplied by IMETCO IMETCO and tapering design support to wind uplift and 1" panel seam cap 1" panel seam cap substrate assembly analysis, we are here to assist you. We routinely help our customers determine appropriate materials, panel width and clip spacing. This hands-on support is what truly Sealant bead Sealant bead up vertical legs up vertical legs differentiates Series 300 and other IMETCO Factory injected Head closure factory-formed Head closure factory-formed products. sealant beads hot melt to t panel pro le and width to t panel pro le and width Continuous butyl sealant tape O -set cleat Stainless steel fasteners Continuous sealant bead, clear orContinuous sealant bead, clear or to match roof panels to match roof panels Neoprene head closure factory-formed to t the panel pro le Ridge/hip trim We (By erector) typ. at IMETCO are driven by one thing - Neoprene head closure factory-formed to t the panel pro le Ridge/hip trim customer satisfaction. It is our mission toead assembly detailbly detail ensure proper system performance based O -set cleat on each individual application, and to Continuous reduce unnecessary costs associated with butyl sealant tape improper design. Field bend pan using pan-end tool supplied by Head closure IMETCO (factory-formed) 1" panel seam cap Neoprene head closure (factory-formed) 1" panel seam cap Sealant bead up vertical legs Continuous sealant bead Head closure factory-formed to t panel pro le and width Exploded assembly view Continuous sealant bead, clear or to match roof panels Neoprene head closure factory-formed to t the panel pro le –9– Head assembly detail
  10. 10. CL 1" Seam Cap Factory Sealant 2-3/8"Series 300 Offers Strength, Beauty and Versatility Panel Continuous BeadsIn addition to the wide range of materials, colors, and mechanical of "Hot Melt" 3/8" Sealant in Each Capfinishes available, Series 300 offers a variety of profiles to Standard Panel Clipaccommodate both aesthetic and functional demands. The Series300 standard seam profile is available in 12-, 16-, and 18-inch Standard Seam Profilestandard widths. The batten seam profile is available in 11-, 16-,and 19-inch standard widths. Contact your IMETCO representativeto inquire about custom panel widths. CL CL CL 1" Seam Cap 12", 16", 18" 2" Seam Cap Factory Factory Sealant Sealant 2-3/8" 2-3/8"Panel Panel 3/8" 3/8" Standard Panel Clip Available With Or Without Center Step-up Standard Batten Clip Series 300 Standard Panel Profile Typical Batten ProfileIn Addition to Series 300, IMETCO Offers a Full Line of Other Metal Roofing SystemsPlease contact us at 800.646.3826 for more information about any of these or other IMETCO products. CL CL CL CL Seam Cap Sealant Bead Panel With Integral Seam Sealant Bead 1.5 or 2" Panel Panel 1-3/4" Sealant Bead Panel 1-1/2" 1" 1/2" 3/16" 3/16" Standard Panel Clip Standard Panel Clip Standard Panel Clip Standard Panel Clip Twin-LocTM Snap-LokTM Perm-LocTM SSTM www.imetco.comR0311
  11. 11. Don’t Forget the WallsIMETCO’s roofing systems arecomplemented by our full line ofmetal wall and soffit panels. Contactyour IMETCO representative for more Experience the Enduring Beauty and Timeless Appeal ofinformation about these and otherproducts. IMETCO Metal Solutions IMETCO is proud to offer a full line of metal roof, wall, and edge 39¼" Overall Width 36" Coverage 12" 1¼" systems and accessories. Using only the highest quality metals fromR-Panel Exposed Fastener Wall Panel select premier mills, IMETCO manufactures its metal products from a wide selection of materials and gauges, including galvanized & Galvalume® steel, aluminum, copper, stainless steel, zinc and titanium.7.2 Rib Exposed Fastener Wall Panel IMETCO’s collection of standard, designer and premium paint finishes provides a wide range of color choices. 39 " Overall Width If the collection does not include your desired color, IMETCO offers custom 34 " Coverage 2 " " colors for an infinite palette ofCOR-PAN Exposed Fastener Wall Panel possibilities. I M E T C O ’s p a i n t e d CL CL 12¾" finishes with Kynar® (Nominal) Panel 500 and Hylar® 5000 1" protective coatings p rovi d e ou t s t a n d i n g Sealant Bead resistance to UV and chemical exposure with PermWall 1.0 Flush Pro lePermWallTM Concealed Clip Wall Panel unmatched performance and color integrity.(also available with 1½” vertical leg at 11¾ inches wide) CL CL 11¾" Panel From smooth, embossed and low-glare (Nominal) CL CL surface textures to striations and minor CL CL ribs added during roll-forming, IMETCO 12" or 16” 12" or 16” (Nominal) (Nominal) 1½" 1" offers several textures to accommodate 1" Sealant Bead aesthetic and structural requirements. FW Panel - Standard Profile FW Panel with Optional Reveal (1/2” or 1”)FW-120 Concealed Fastener Wall Panel PermWall 1.5 Flush Pro le For a sleek, finished look, IMETCO offers CL CL a wide range of roofing accessories. 16" 12¾" Panel Clip Panel Coverage (Nominal) 4" @ 24"o.c. Latitude Fascia, coping, gutters and downspouts Panel 1" are all formed by our talented craftsmen. Fasteners are available in any of our Sealant Bead standard, premium, designer, and customLatitudeTM Series Wall Panel 1.0 Single Vee Pro PermWall le colors. IMETCO’s line of accessories also(Several 12- and 16-inch profiles for horizontal & vertical application) includes head, hip and valley closures, a CL 11¾" CL Panel wide variety of clips, trim, edge stiffeners, (Nominal) and snow retention systems. 1½" 7/16" Panel 12" (Nominal) Sealant Bead –11– CL CLSP-120 Concealed Fastener Single Vee Pro le PermWall 1.5 Soffit Panel
  12. 12. The Total Solution IMETCO offers a full line of metal roofing, wall, and edge systems and accessories. Be sure to ask your representative about other products from IMETCO, such as: Asset Protection • The only American- produced zinc for the construction industry • Corrosion resistant, self-healing • Environmentally Liability Cost friendly Protection Protection AquaBlock Underlayment • Self-adhering, self-sealing • 100% SBS-modified, fiberglass- reinforced PerformaEdge® Fascia & Coping Standard Colors • Weather-tight, wind-resistant Irish Mist Almond Suede Emerald Forest Blue Sapphire • Fully tested per ANSI/SPRI ES-1 standards Tuscan Slate Epic Bronze Solar White Cadet Gray • 20-year blow-off and weather-tight warranties Sandstone Chestnut Georgian Brick Opal Star Colonial Red Silver Cloud Wedgewood Weathered Copper Series 300/Perform-A-Deck Assembly • Series 300 metal roofing from IMETCO • Metal deck and insulation from Martin Fireproofing Designer Colors • Single warranty for complete assembly Iron Mountain Cardinal Red Carolina Coast • Withstands extreme winds and debris impact as Natural Patina Caribbean Coral Merlot recommended by FEMA 361 Design and Construction Guidance for Community Safe Rooms Premium Colors Photovoltaic Many of IMETCO’s roof systems are designed to allow the addition Platinum Silver Roman Copper Brite Copper of enhancements such as solar roof panels. Contact your IMETCO Champagne Preweathered Galvalume Galaxy Blue representative for more information. Signature Collection - Patterned The IMETCO Advantage Antique Bronze Artisan Steel Quartz For more than a decade, we at IMETCO have enjoyed our reputation as a Acrylic Galvalume Copper Patina Field Stone manufacturer committed to providing products of only the highest quality. Our staff comprises expertise in metal roofing, design, engineering, testing, code compliance, manufacturing, and more. Above all, our staff excels in providing unparalleled customer service. Prestige Collection - Natural Metals United Zinc: Glacier Gray Copper At IMETCO, your satisfaction United Zinc: Onyx Black TextureMatte Stainless Steel is our only measure of success! MIAMI DADE COUNTY APPROVED Galvalume® is steel pre-treatment and a registered trademark of Biec International Inc. Hylar® is a fluorocarbon paint finish available on our metal products, and is a registered trademark of Ausimont USA Inc. Kynar® is a fluorocarbon paint finish available on our metal products, and is a registered trademark of Elf Atochem North 4648 S. Old Peachtree Rd. | Norcross, GA 30071 America Inc. FM® (Factory Mutual) is a world leader in property loss prevention and control engineering, research, and training. Its research-based recommendations set new standards that reduce the chance of property loss due to fire, weather conditions, and failure of electrical or mechanical equipment. It is a registered trademark of Factory 800.646.3826 (p) | 770.908.2264 (f) www.imetco.com Mutual Global, and must be identified as such whenever referred to in print. www.imetco.com Series 300® and all other trademarks are owned by Innovative Metals Company, Inc. (IMETCO). 03/2011R0311

×