Process Journal 2

290 views

Published on

Published in: Business, Health & Medicine
0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total views
290
On SlideShare
0
From Embeds
0
Number of Embeds
3
Actions
Shares
0
Downloads
2
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

Process Journal 2

  1. 1. Marking Out And Cutting Wood For Footstool Due:Friday, March 25, 2011 What did you do today?: Today I mark out a piece of wood for my footstool. I am marking the legs of the footstool. The shape of it is in a book style What did you use?: I used a pencil to mark out the wood,’G’ clamp,tennon saw, try square to get a 90º angle and I used a steel rule to get a perfect straight line. Why did I do this the way I did it?: I did it Getting a right angle using a tri- because if I get the right measurement, I dont have to waste my time cutting the wood if it’s not marked out properly. What did I do well?: I did well in being forcused on my project and being quiet. What was the process for today?: I just measured and marked out the piece of wood. What is next in the process?: Next class, I will hopeful I’ll cut out the legs. What I can improve on?: I can improve on counting on myself on doing the right thing. What was my emotion?: I was in a good mood because the weather was nice which can effect my work. What A.O.I and learner profile are you?: This was about human ingenuity by using some tools. I am a thinker because I didn’t just jump to theUsing a steel rule to make out thepart that I am cutting. Cuting the pine wood using a ‘G’ clamp to hold the wood and a tennon
  2. 2. next step without thinking. Cutting Wood For My Footstool Legs Due: Monday, March 28, 2011 What did you do today?: Today I finish cutting out the legs for my stool. l started to cut out my legs support. I made the legs support so that it can fit the legs. I had to first mark out the support before cutting it. What did you use?: I used a pencil to mark out the wood,’G’ clamp,tenon saw, gent saw,crosscut saw ,try square to get a 90º angle and I used a steel rule to get a perfect straight line. Why did I do this the way I did it?: I did it because I have This is the wood that I cut out using a to cut the legs to make The legs, I dont have to waste my time cutting the wood if it’s not marked out properly. What did I do well?: I did well in being forcused on my project and being quiet. I did well in being where everyone is. What was the process for today?: I cut a piece of wood for my footstool legs. What is next in the process?: Next class, I will hopeful I’ll cut out the support to hold my legs. What I can improve on?: I can improve on thinking of I need to do next. What was my emotion?: I was in a good mood becauseI am marking out the support for my the weather was nice which can effect my work. What A.O.I and learner profile are you?: This was about human ingenuity by using some tools. I am a knowledgeable because I knew what to do without beening told to do what I have to do. Cutting out my support using a tennon saw.
  3. 3. Cutting Support For The Legs Due: Tuesday, March 29, 2011 What did you do today?: Today I finish cutting out the legs support for my stool. l started to smooth out my legs support. I made the legs support so that it can fit the legs. I am making it straight and smooth. What did you use?: I used a pencil to mark out the wood,’G’ clamp,tenon saw, gent saw,crosscut saw ,smoothen plane to smooth the wood ,try square to get a 90º angle and I used a steel rule to get a perfect straight line. Why did I do this the way I did it?: I did it because I have to smooth the legs to make the legs straight and Marking out my support using a smooth, I dont have to waste my time smoothing the wood if it’s not properly smoothed. What did I do well?: I did well in being forcused on my project and being quiet. I did well in being where everyone is. I also did well in getting on the right level. What was the process for today?: I Smooth a piece of wood for my footstool legs for my support. What is next Cutting my support with a tennon in the process?: Next class, I will hopeful I’ll finish smoothing out the support to hold my legs. What I can improve on?: I can improve on thinking of what to do next without asking.Smoothing the support with the
  4. 4. What was my emotion?: I was in a happy mood because there was not much people which made it guiet which made me feel free and it was easy to work. What A.O.I and learner profile are you?: This was about human ingenuity by using some tools. I am a caring because I was taking my responeslity in my work. Continuing Cutting Support For The Legs Due: Thursday , March 31, 2011 What did you do today?: Today I start cutting out the second legs support for my stool. I had to draw it before cutting it. It is in a triangular shape. What did you use?: I used a pencil to mark out the wood,disc- sander to smooth the faces of the leg support,apron to protect me , tenon saw, and I used a steel rule to get a perfect straight Tying my apron. line. Why did I do this the way I did it?: I did it because I have to make to leg support in order to have the legs balance and I drawed it the right size as well so that I dont have to waste my time cutting the wood if it’s not properly drawen. What did I do well?: I did well in being forcused on my project and being quiet. I did well in being where everyone is. I also did well in getting on the right level and toMarking out the wood to equal to the using the tools theother support using a steel rule and a right way What was the process for today?: I cutted a second piece of wood for my footstool legs for my support. What is next in the process?: Next class, I will hopeful I’ll finish cutting the support out and smooth the faces. What I can improve on?: I can improve on Cutting my piece of wood using a tennon saw.
  5. 5. thinking of what to do next without asking. What was my emotion?: I was in a so-so mood because the DT studio makes me tired. What A.O.I and learner profile are you?: This was about human ingenuity by using some tools. I am a knowledgeable I did what I need to do for the leason. Cutting The Second Support For The Legs Cutting the support using a tennon saw. Due: Thursday , April 1st, 2011 What did you do today?: Today I Continued to cut out the second legs support for my stool. I had to draw it before cutting it. It is in a triangular shape. What did you use?: I used a pencil to mark out the wood, bench hock to hold the piece of pine wood ,apron to protect me , tenon saw, and I used a steel rule to get a perfect straight line. Why did I do this the way I did it?: I did it because I have to make to leg support in order to have the legs balance and I drawed it the right size as well so that I dont have to waste my time cutting the wood if it’s not properly drawen. What did I do well?: I did well in being forcused on my project and being quiet. I did Checking if my supports are equal. well in being where everyone is. I also did well in getting on the right level and to using the tools the right way. I also did well in getting to the right process. What was the process for today?: I cutted a second piece of wood for my footstool legs for my support.Measure and marking out the pieceof wood using a pencil and steel rule. What is next in the process?: Next class, I will hopeful I’ll finish cutting the support out and smooth the faces.
  6. 6. What I can improve on?: I can improve on thinking of what to do next without asking. I can also improve on finishing this process quick. What was my emotion?: I was in a good mood because the DT studio makes me happy. What A.O.I and learner profile are you?: This was about human ingenuity by using some tools. I am a thinker I did the thinking before doing anything. Making Wood Equal and Drilling holes Due: Thursday , April 18th, 2011 What did you do today?: Today I disc-sander smoothen my pieces of wood up. I also drilled holes in my legs so the I can connect the supports with the legs. Using a disc-sander to smooth my What did you use?: I used a pencil to mark out the wood , tri-square to get a perfect right angle ,apron to protect me , disc-sander and I used a steel rule to get a perfect straight line. Why did I do this the way I did it?: I did it because I have to make to leg support in order to have the legs balance and I drawed it the right size as well so that I dont have to waste my time cutting the wood if it’s not properly drawen. I drilled the hole so that I can screw the pieces. Smoothing my legs support using a What did I do well?: I did well in being forcused on my project and being quiet. I did well in being where everyone is. I also did well in getting on the right level and to using the tools the right way. I also did well in getting to the right process. I did well in being in the right track. What was the process for today?: I drilled a hole in the pine wood in the to put the screws.Drilling holes in my footstool legs.
  7. 7. What is next in the process?: Next class, I will hopeful put the legs to one piece. What I can improve on?: I can improve on trying to work on myself. I can just stop questioning and just doing it on my own. What was my emotion?: I was in a good mood because the DT studio makes me happy. I also like Dt because I use tools that I never used before. What A.O.I and learner profile are you?: This was about human ingenuity by using some tools. I am a thinker I did the thinkingMake a V shape on the top of before doing anything.the of the hole. Drilling holes To Put The Legs To One Piece Due: Thursday , April 19th, 2011 What did you do today?: Today I drilled holes into my pieces of wood. I also drilled holes in my legs so the I can connect the supports with the legs. I also made the top of the hole look like a V to that the screw is flat. What did you use?: I used a pencil to mark out the wood , tri-square to get a perfect right angle ,apron to protect me and I used a steel rule to get a perfect Marking the hole to drill. straight line. Why did I do this the way I did it?: I did it because I have to make to legs can’t just stand without any screws, so I drilled the hole do later I can put the screw in. I did the V shape in the top of the hole so that the screw gones flat with the wood. What did I do well?: I did well in being forcused on my project and being quiet. I did well in being where everyone is. I also did well in getting on the right 1 and to using the tools the right way. I also did well in getting to the right process. I did well in being in the right track. I also did well in being well balance in my speed. What was the process for today?: I drilled a hole in the pine wood in the to put the screws.Tighting the drill bit.
  8. 8. What is next in the process?: Next class, I will hopeful put the legs to one piece. I will put the support on the legs and the leg. What I can improve on?: I can improve on trying to work on myself. I can just stop questioning and just doing it on my own. I can also improve on doing the steps with no mistakes What was my emotion?: I was in a good mood because the DT studio makes me happy. I also like Dt because I use tools that I never used before. I feel well in the Dt studio because the work makes me forget about how tired I am. What A.O.I and learner profile are you?: This was about human ingenuity by using some tools. I am a thinker I did the thinking before doing anything. I am also a thinker because I tryed to think what to do even if it does work. Drilling holes And Making A V Shape For the LegMarking out the wood using a penciland steel rule in the legs for my Due: Thursday , April 21st, 2011 What did you do today?: Today I drilled holes into my other pieces of wood. I also marked out the other piece of wood to drill the holes. I also made a a V shape in the top of the holes. I used a cordless drill which makes the hole. I also had to measure and mark the wood out before drilling Drilling a hole for the screw. What did you use?: I used a pencil to mark out the wood , tri-square to get a perfect right angle ,apron to protect me and I used a steel rule to get a perfect straight line. Why did I do this the way I did it?: I did it because I have to make to legs can’t just stand without any screws, so I drilled the hole do later I can put the screw in. I did the V shape in the top of the hole so that the screw gones flat with the wood. I also marked the wood well because the both are equal. What did I do well?: I did well in being forcused on my project and being quiet. I also did well in marking out the wood. I drill the hole in the right place that I marked out. Making a V shape on top of the hole.
  9. 9. What was the process for today?: I drilled a hole in the other pine wood in the to putthe screws. I also made a V shape on the top of the hole.What is next in the process?: Next class, I willhopeful put the legs to one piece. I will put thesupport on the legs and the leg.What I can improve on?: I can improve on tryingto work on myself. I can just stop questioning andjust doing it on my own. I can also improve ondoing the steps with no mistakes. I also canimprove on going faster in my process.What was my emotion?: I was in a So-somood because it was kinda hot in the dot room. Check if the holes are in the sameThe tools such as the driller is heavy which makes my hand hurt. What A.O.I and learner profile are you?: This was about human ingenuity by using some tools. I am a knowledgeable because I was in the right way of doing my process. I am also knowledgeable because I know my tools well. Drill holes and Finding TheChecking for the right screw. Right ScrewDue: Friday , April 22nd, 2011What did you do today?: Today I drilled holes into my other pieces of wood. I also waslook for the right screw for my footstool legs. I also made a a V shape in the top of theholes. I used a cordless drill which makes the hole. I also had to see how to put my legspieces together.What did you use?: I used a pencil to mark out the wood , tri-square to get a perfectright angle, cordless drill ,apron to protect me and I used a steel rule to get a perfectstraight line.Why did I do this the way I did it?: I did it becauseI have to make to legs can’t just stand without anyscrews, so I drilled the hole do later I can put thescrew in. I did the V shape in the top of the hole sothat the screw gones flat with the wood. I alsocheched that I can put together the pieces together. Drilling a deep v shape for
  10. 10. What did I do well?: I did well in being forcused on my project and being quiet. I also did well in marking out the wood. I drill the hole in the right place that I marked out. What was the process for today?: I drilled a hole in the other pine wood in the to put the screws. I also made a V shape on the top of the hole. What is next in the process?: Next class, I will hopeful put the legs to one piece. I will put the support on the legs and the leg. What I can improve on?: I can improve on just stop questioning and just doing it on my own. I can also improve on doing the steps with no mistakes. I also can improve on going faster in my process. I also can do my work fast. What was my emotion?: I was in a good mood because the room was warm. I also like it because I like using Dt toolsMarking out The place toscrew using a hammer and a What A.O.I and learner profile are you?: This was about human ingenuity by using some tools. I am a communicator because I talked with others before doing anything. Drill holes and Finding The Right Screw Using the drill to make a hole so that Due: Monday , April 25nd, 2011 What did you do today?: Today I drilled holes into my leg support. I also put the legs to one piece by screwing it on. I marked out the place that I was going to drill so that I have the perfect fit. What did you use?: I used a pencil to mark out the wood , tri-square to get a perfect right angle, cordless drill, screws ,apron to protect me and I used a steel rule to get a perfect straight line. Why did I do this the way I did it?: I did it because I have to make to legs can’t just stand without any screws, so I drilled the hole do later I can put the screw in. I also checked that I can put together the pieces together. I put the pieces for the legs together because I Screwing on the screws using a screw driver.
  11. 11. it will hold the legs up. What did I do well?: I did well in being forcused on my project and being quiet. I also did well in marking out the wood. I drill the hole in the right place that I marked out. Finishing the legs of thr footstool. What was the process for today?: I had to put the piece of the legs together. What is next in the process?: Next class, I will hopeful put the top on the legs. What I can improve on?: I can improve on just stopThis is what my project questioning and just doing it on my own. I can also improve on doing the steps with no mistakes. I also can improve on going faster in my process. I also can do my work fast. I also can improve on standing up because I was so tried that I fell down on my knees. What was my emotion?: I was in a bad mood because the room was warm which made me fall on the ground and I couldn’t do much of work. What A.O.I and learner profile are you?: This was about human ingenuity by using some tools. I am a risk- taker because even if I was in a bad mood, I still manage to finsh The legs. Attaching the legs together & making support for The Top Testing the support out. Due: Tuesday , April 26th, 2011 What did you do today?: Today I Attached all my legs pieces together. I screwd it on but first I had to mark out and drill a hole for the screw to go through. I also started to make the support for the top so if holds still. What did you use?: I used a pencil to mark out the wood , tri-square to get a perfect right angle, cordless drill, screws , Disc-sander ,apron to protect me and I used a steel rule to get a perfect straight line. Why did I do this the way I did it?: I did it Marking out the support.
  12. 12. because I have to make to legs can’t just stand without any screws, so I drilled the hole do later I can put the screw in. I also checked that I can put together the pieces together. I put the pieces for the legs together because I it will hold the legs up. I also made the support for the top so it will be still. What did I do well?: I did well in putting the leg piece together. I also did well in planning what I was going to do before starting anything. I also did well in being accurate in my work. Cutting the top of the legs What was the process for today?: I had to put the piece of the legs together. I also had to make the support for the top. What is next in the process?: Next class, I will hopeful put the top on the legs. What I can improve on?: I can improve on just stop questioning and just doing it on my own. I can also improve on doing the steps with no mistakes. I also can improve on going faster in my process. What was my emotion?: I was in a good mood because the Dt tools made me feel good. Marking out a piece of wood for the What A.O.I and learner profile are you?: This was about human ingenuity by using some tools. I am a knowledgeable because I put the pieces together in the right way. Attaching the legs together & making support for The Top Due: Tuesday , May 2nd, 2011 What did you do today?: Today I started cut off the top of the legsto make it straight for the top to fit on the top of the footstool. I had to use a tennon saw to cut to top of the legs off. I first had to measure and mark out the top of the leg using a level. I alsoUsing a level to mark out the top. What did you use?: I used a pencil to mark out the wood , tri-square to get a perfect right angle, cordless drill, screws,
  13. 13. level to mark a perfect horizontal line ,apron to protect me and I used a steel rule to get a perfect straight line. Why did I do this the way I did it?: I did it because to make the top stand, I have to make the top of the leg flat for the support and the leg to level up together. I made the supports because the top can be still. I have to screw the top with the legs. What did I do well?: I marked out the legs support in a piece of legs. I also did well in cutting the top of the leg with out making it cut the line. I did well in being paient when I need help. What was the process for today?: I cutted the top of Cutting the top of the leg. the leg. What is next in the process?: Next class, I will hopeful smooth the top of the legs and cut the supports to. What I can improve on?: I can improve on just stop questioning and just doing it on my own. I can also improve on doing the steps with no mistakes. I also can improve on going faster in my process. I can improve on being fast. What was my emotion?: I was in a good mood because the Dt tools made me feel good. What A.O.I and learner profile are you?: This was about human ingenuity by using some tools. I am a knowledgeable because I put the pieces together in the right way. Straighten the top of the leg Date: Tuesday , May 5th, 2011 What did you do today?: Today I countuied to cut of the top of the leg. I also smoothed the top of the leg up. I also start to cut the other pair of the support. What did you use?: I used a pencil to mark out the wood , tri-square to get a perfect right angle, cordless drill, screws, pullsaw ,apron to protect me and I used a steel rule to get a perfect straight line.Cutting the support out. Why did I do this the way I did it?: I did it because to make the top stand, I have to make the top of the leg flat for
  14. 14. the support and the leg to level up together. I made the supports because the top can be still. I have to screw the top with the legs. I cutted out the support so that the top doesn’t fall off. What did I do well?: I marked out the legs support in a piece of legs. I also did well in cutting the top of the leg with out making it cut the line. I did well in being paient when I need help. What was the process for today?: I cutted the top of the leg and the support. What is next in the process?: Next class, I will hopeful smooth the top of the legs and cut the supports to.Cutting the support using a croping What I can improve on?: I can improve on just stopsaw. questioning and just doing it on my own. I can also improve on doing the steps with no mistakes. I also can improve on going faster in my process. I can improve on being fast. What was my emotion?: I was in a good mood because the Dt tools made me feel good. What A.O.I and learner profile are you?: This was about human ingenuity by using some tools. I am a knowledgeable because I put the pieces together in the right way. Making second pair of the support Date: Thursday , May 6th, 2011 What did you do today?: Today I continued to the second pair of my support. I had to use a croping saw to get the curves lines cutted. I also has to use a tennon saw for the straight lines. I also used the bench vices to hold the piece of wood. What did you use?: I used a pencil to mark out the wood , croping saw ,apron to protect me and I This is what my project will look like used a steel rule to get a perfect straight line. with out paint.
  15. 15. Why did I do this the way I did it?: I did it because to make the top stand, I have to make the support of leg. I also did the way I did it because there was no other way in doing this process What did I do well?: I marked out the legs support in a piece of legs. I did well in being paient when I need help. I also did well in almost finishing the process What was the process for today?: I cut the support up using a croping saw. What is next in the process?: Next class, I will try to attach the support with the legs.Cutting the straight part of the wood. What I can improve on?: I can improve on just stop questioning and just doing it on my own. I can also improve on doing the steps with no mistakes. I also can improve on going faster in my process. I can improve on being fast. What was my emotion?: I was in a good mood because the Dt tools made me feel good. What A.O.I and learner profile are you?: This was about human ingenuity by using some tools. I am a knowledgeable because I put the pieces together in the right way. Smoothing the piece of wood using a Smothing and cutting second pair of support Date: Friday , May 6th, 2011 What did you do today?: Today I cut out the This is a barrel sander. It is used in straight part of The support. I used a genet saw the pedestal drill to smooth out inside to cut it. I also smoothed the curves parts using a curves.
  16. 16. new tool in the pedestal Drill with the drill bit called barrel sander . I also started to smooth the straight part using a disc-sander. What did you use?: I used a pencil to mark out the wood, pedestal drill, disc-sander to smooth in the straight parts , croping saw ,apron to protect me and I used a steel rule to get a perfect straight line. Why did I do this the way I did it?: I did it because to make a perfect curve I had to use the pedestal drill using a special drill bit. I also used a disc-sander so that I have a perfect line What did I do well?: I did well in smoothing out the curves and the straight part of the support. I also did well in cutting the wood without cutting out the line so that I know where to smooth it at.Using a barrel sander in thepedestal drill to smooth the What was the process for today?: I smoothed the support. What is next in the process?: Next class, I will try to attach the support with the legs. What I can improve on?: I can improve cutting wood fast. I could also improve on using my time wisely as sometimes when I am waiting for help, I tend to do nothing at that moment. I also can improve on getting work done quicker. What was my emotion?: I was in a good mood because the Dt tools made me feel good. What A.O.I and learner profile are you?: This was about human ingenuity by using some tools. I am a thinker because I put my brain to a test on which tools to use. Smoothing out the support and attaching it to the legs. Date: Monday , May 9th, 2011 What did you do today?: Today I continued to smooth out the support. I also managed to get a start on drilling holes throught the support and leg and attaching them as well. I had to mark out the pieces of wood before drilling it. I also had to smooth the inside curves using a pedestal drill with a barrel sander bit. What did you use?: I used a pencil to mark out the wood, pedestal drill, disc-sander to smooth in the straight parts ,apron to protect me, cordless drill, screw driver and a bench vice. Why did I do this the way I did it?: I did it because to make Smoothing the straight parts using a disc-sander.
  17. 17. a perfect curve I had to use the pedestal drill using a special drill bit. I also used a disc-sander so that I have a perfect line. I also drilled it so that I can connect it with the legsusing a screw. What did I do well?: I did well in smoothing out the curves and the straight part of the support. I also did well in cutting the wood without cutting out the line so that I know where to smooth it at. I also did well in marking out the mood perfectly. What was the process for today?: I smoothed and drilled the support using a cordless drill, disc-sander and a pedestal drill. What is next in the process?: Next class, I will tryScrewing on the screw using a to attach the support with the legs.screwdriver. What I can improve on?: I can improve cutting wood fast. I could also improve on using my time wisely as sometimes when I am waiting for help, I tend to do nothing at that moment. I also can improve on getting work done quicker. I can improve on being slower while using the disc- sander as I tend to do it really fast. What was my emotion?: I was in a horrible mood because the DT room is hot which puts which goes in my body and takes out all my energy that I can handle which made me almost faint.Drilling a hole using a cordless drill. What A.O.I andlearner profile are you?: This was about human ingenuityby using some tools. I am a risk-taker because even if Iwas in a horrible mood, I tried to work. Attaching The SupportsDate: Tuesday , May 10th, 2011 Putting P.V.A on the piece of wood.What did you do today?: Today I continued to Attach thesupport in my legs. I had to first place the support in thendrill a hole then then add P.V.A to the support and put the
  18. 18. support and screw it with force. I also had to make I use the countesink bit so that the screw goes flat in the wood. What did you use?: I used a pencil to mark out the wood, Cordless drill, P.V.A glue ,apron to protect me, cordless drill, screw driver and a bench vice. Why did I do this the way I did it?: I did it because to make the top stand it will need a support to hold to make it still. I also did it so that the top because equals. What did I do well?: I attached the support with the leg in a equal position. I also did well in screwing the screw on perfectly. I also did well in putting enough P.V.A glue.Putting P.V.A on the piece of wood. What was the process for today?: I had to put the support into the legs. What is next in the process?: Next class, I will try to attach the support with the legs and maybe try to put the leg. What I can improve on?: I can improve on working faster. I can also improve on screwing the screw on well and tightly. I can also improve on cleaning up fast. What was my emotion?: I was in a good mood because DT bring up my energy. What A.O.I and learner profile are you?: This was about Drilling a hole using a cordless drill. human ingenuity by using some tools. I am a risk-taker because I knew what to do in that lesson. Attaching The Supports Date: Thursday , May 12th, 2011 What did you do today?: Today I Attached the last support in my legs. I had to first place the support in then drill a hole then then add P.V.A to the support and put the support and screw it with force. I also had to make I use the countesink bit so that the screw goes flat in the wood.Screwing on the screw using a What did you use?: I used a pencil to mark out the wood,screwdriver.
  19. 19. Cordless drill, P.V.A glue ,apron to protect me, cordless drill, screw driver and a bench vice. Why did I do this the way I did it?: I did it because to make the top stand it will need a support to hold to make it still. I also did it so that the top because equals. What did I do well?: I attached the support with the leg in a equal position. I also did well in screwing the screw on perfectly. I also did well in putting enough P.V.A glue. What was the process for today?: I had to put the support into the legs. What is next in the process?: Next class, try to attach the top in with the legs Marking a spot to drill using the What I can improve on?: I can improve on working faster. I can also improve on screwing the screw quick because it took me a whole lesson to do that. I can also improve on cleaning up fast. What was my emotion?: I was in a good mood because DT bring up my energy. What A.O.I and learner profile are you?: This was about human ingenuity by using some tools. I am a reflective Putting P.V.A on the piece of wood. because I was think on what I could improve when waiting for the P.V.A to dry. Attaching The Supports Date: Friday , May 13th, 2011 What did you do today?: Today I Attached the last support in myThis is what my project will legs. I had to first place the support in then drill a hole then then addlook like with the top on it. P.V.A to the support and put the support and screw it with force. I also had to make I use the countesink bit so that the screw goes flat
  20. 20. in the wood. I also started to put a bigger piece of support to make the top balance well. What did you use?: I used a pencil to mark out the wood, Cordless drill, P.V.A glue ,apron to protect me, cordless drill, screw driver and a bench vice. Why did I do this the way I did it?: I did it because to make the top stand it will need a support to hold to make it still. I also did it so that the top because equals. I also had a big support so that the top stays still. What did I do well?: I attached the support with the leg in a equal position. I also did well in screwing the screw on perfectly. I also did well in putting enough P.V.A glue. I also did well in thinking of ways to make the top well.Sanding the top of my legs using a What was the process for today?: I had to put the support into the legs. What is next in the process?: Next class, try to attach the top in with the legs What I can improve on?: I can improve on working faster. I can also improve on screwing the screw quick because it took me a whole lesson to do that. I can also improve on cleaning up fast. I also can improve on working on my own. What was my emotion?: I was in a good mood because DT bring up my energy. What A.O.I and learner profile are you?: This was about human ingenuity by using some tools. I am a reflective because I was think on what I could improve when waiting for the P.V.A to dry. Attaching The Supports Date: Monday , May 16th, 2011 What did you do today?: Today I Attached the one of the big piece of support to the legs to make the top stay still. I had to make the spot out first, then I had to drill a hole and countersink it. I also used glue to make the support still. I had to screw the screw using a screwdriver. I also had to disc-sander the legs and I also used a sanding bored to smooth it as well. Screwing on my support. What did you use?: I used a pencil to mark
  21. 21. out the wood, Cordless drill, P.V.A glue ,apron to protect me, sanding bored, disc- sander, screwdriver, cordless drill, screw driver and a bench vice. Why did I do this the way I did it?: I did it because to make the top stand it will need a support to hold to make it still. I also did it so that the top because equals. I also had a big support so that the top stays still. What did I do well?: I attached the big support with the leg in a equal position. I also did well in screwing the screw on almost perfectly. I also did well in putting enough P.V.A glue. I also did well in thinking of ways to make the top well.Sanding the top of my legs using What was the process for today?: I had to put the biga sanding board. support into the legs. What is next in the process?: Next class, try to attach the top in with the legs What I can improve on?: I can improve on working faster. I can also improve on screwing the screw quick because it took me a whole lesson to do that. I can also improve on cleaning up fast. I also can improve on working on my own. What was my emotion?: I was in a good mood because DT bring up my energy. What A.O.I and learner profile are you?: This was about human ingenuity by using some tools. I am a reflective because I was think on what I could improve when waiting for the P.V.A to dry. Attaching And Smoothing Legs Date: Tuesday , May 17th, 2011 What did you do today?: Today I Attached the last support on to my legs. I had to go use P.V.A glue it make it stick. I also had to put lots of pressure in the screw because I have to make it tight. After that I had to smooth the stop out using a sanding bored. I had to do it so that I get the top evenly matched with the others parts. What did you use?: I used a pencil to mark out the wood, Cordless drill, P.V.A glue ,apron to protect me, sanding bored, screwdriver, Screw the screws onto the legs.
  22. 22. cordless drill, screw driver and a bench vice. Why did I do this the way I did it?: I did it because to make the top stand it will need a support to hold to make it still. I also did it so that the top because equals. I also had a big support so that the top stays still.i also smoothed the legs so that I make all the parts even. What did I do well?: I attached the big support with the leg in a equal position. I also did well in screwing the screw on almost perfectly. I also did Cutting small pieces of wood. well in putting enough P.V.A glue. I also did well in thinking of ways to make the top well. I also did well at smoothing the legs perfectly. What was the process for today?: I had to put the big support into the legs. What is next in the process?: Next class, try to attach the top in with the legs What I can improve on?: I can improve on working faster. I can also improve on screwing the screw quick because it took me a whole lesson to do that. I can also improve on cleaning up fast. I also can improve on working on my own. Sanding the top of my legs What was my emotion?: I was in a good mood because DT bring up my energy. using a sanding bored. What A.O.I and learner profile are you?: This was about human ingenuity by using some tools. I am a thinker because I had to see what I do before just doing it. Smoothing Legs Date: Thursday , May 19th, 2011 What did you do today?: Today I had to make the top of the legs straight. I first used the smoothing board to smooth the top of the legs. I also used a smoothin plane to smooth theSmoothing the top of the legs using a top. I also had to cut little pieces of wood for some reason.smoothin plane.
  23. 23. What did you use?: I used a pencil to mark out the wood, gentle saw ,apron to protect me, sanding board, smoothin plane and a bench vice. Why did I do this the way I did it?: I did it because I have to make the top stay straight and not rocking. I also did it so it can be tight onto the top of the legs. I also did made cut the piece of wood because I need to make the stool nice and tight. What did I do well?: I smoothed the top well. I used thePutting glue on the top of the legs the smoothin plane the right way. I also used the legs in the smoothin board. I also did well in cutting the wood well. What was the process for today?: I had to smooth the top of the legs. What is next in the process?: Next class, try to attach the top in with the legs What I can improve on?: I can improve on working faster. I can also improve on screwing the Countersink the hole. screw quick because it took me a whole lesson to do that. I can also improve on cleaning up fast. I also can improve on working on my own. What was my emotion?: I was in a good mood because DT bring up my energy. What A.O.I and learner profile are you?: This was about human ingenuity by using some tools. I am a thinker because I had to see what I do before just doing it. Attaching The Top Onto The Legs Date: Friday , May 20th, 2011 Screwing on the screws using a What did you do today?: Today I had to glue on the small piece of wood on top of the big support so it can be leveled up screwdriver.
  24. 24. perfectly. I also had to glue and screw on the top on the legs. Also, to screw on the top I had to drill the holes. I also had to cut out the piece of wood. What did you use?: I used a pencil to mark out the wood, Cordless drill, P.V.A glue, screwdriver, screws, bench hock, bench vice and gentle saw. Why did I do this the way I did it?: I did it because I had to make the top stand I the support was not straight so I had to put a small piece of wood. I also had to put the top because the top can not stand onSanding the sharp edges using it’s own.garnet paper with a sanding block. What did I do well?: I cut out the piece of wood well. I used the drill the right way. I places the small piece of wood in the right place. I also did well in cutting the wood well. What was the process for today?: I had to attach the top. What is next in the process?: Next class, I will try to paint my stool. Filing the corners using a flat file. What I can improve on?: I can improve on working faster. I can also improve on screwing the screw quick because it took me a whole lesson to do that. I can also improve on cleaning up fast. I also can improve on working on my own. I can improve on my drills skills as well. What was my emotion?: I was in a good mood because DT bring up my energy. What A.O.I and learner profile are you?: This was about human ingenuity by using some tools. I am a knowledgeable because I I knew what to do in that lesson without wasting time. Smoothing Sharp Edges And Filling The Gaps Putting the wood filler. Date: Monday , May 23th, 2011
  25. 25. What did you do today?: Today I Smoothed out the sharp corners. I first used a file to smooth the corners up. After that I had to used the rough sanding paper the that it goes smoother. Then, I had to fill in the gaps with wood filler. What did you use?: I used a pencil to mark out the wood, Cordless drill, P.V.A glue, screwdriver, screws, bench hock, wood filler, flat files, garnet paper with a sanding block and bench vice. Why did I do this the way I did it?: I did it because I had to smooth the stool so that there is not sharp edges so that we don’t hurt ourselfs. Also I had to fill in the wood so that there is no gaps in the wood. What did I do well?: I smoothing the footstool well. I used the flat file the right way. I used the garnet paper in the right place. What was the process for today?: I had to smooth the footstool. What is next in the process?: Next class, I will try to paint my stool.Filing the corners using a flat file. What I can improve on?: I can improve on working faster. I can also improve on screwing the screw quick because it took me a whole lesson to do that. I can also improve on cleaning up fast. I also can improve on working on my own. I can improve on my drills skills as well. What was my emotion?: I was in a good mood because DT bring up my energy. What A.O.I and learner profile are you?: This was about human ingenuity by using some tools. I am a knowledgeable because I I knew what to do in that lesson without wasting time. Smoothing Sharp Edges And Filling Sanding the sharop edges using The Gaps garnet paper with a sanding block. Date: Tuesday , May 24th, 2011
  26. 26. What did you do today?: Today I had to finish up Smoothing out the sharp corners. I first used a file to smooth the corners up. After that I had to used the rough sanding paper the that it goes smoother. Then, I had to fill in the gaps with wood filler. I also had to level the legs by making the legs stand up properly. What did you use?: I used a pencil to mark out the wood, bench hock, Smoothen plan , flat files, garnet paper with a sanding block and bench vice. Why did I do this the way I did it?: I did it because I had to smooth the stool so that there is not sharp edges so that we don’t hurt ourselfs. Also I had to fill in the wood so that there is no gaps in the wood. I also had to make theClamping the clamp to my bottom of the lefs straight so that the stool stands still.legs. What did I do well?: I smoothing the footstool well. I used the flat file the right way. I used the garnet paper in the right place. What was the process for today?: I had to smooth the footstool and make the bottom of the stool smooth. What is next in the process?: Next class, I will try to paint my stool. What I can improve on?: I can improve on working faster. I can also improve on screwing the screw quick because it took me a whole lesson to do that. I can also improve on cleaning up fast. I also can improve on working on my own. I can improve on my drills skills as well. What was my emotion?: I was in a good mood because DT bring up my energy. What A.O.I and learner profile are you?: This was about human ingenuity by using some tools. I am a knowledgeable because I I knew what to do in that lesson without wasting time. Trimming Of the the top of the top Date: Thursday , May 26th, 2011 What did you do today?: Today I made a rectange 1 millimeter deep gap for me to put a book cover to match the theme of my book. I used the trimmer route Using the trimmer route.
  27. 27. to make the rectangle 1 millimeter deep. I also had to unscrew the screws and re- countersink them because the screws edges were not levels to the stool. So to hole my footstool, I had to uses a clamp to hole the stool still. What did you use?: I used a pencil to mark out the wood, bench hock, Smoothen plan , flat files, clamp, trimmer route,cordless drill, G-clamp and bench vice. Why did I do this the way I did it?: I did it because I had to smooth the stool so that there is not sharp edges so that we don’t hurt ourselfs. Also I had to fillSmoothing the top of the stool. in the wood so that there is no gaps in the wood. I also had to make the bottom of the lefs straight so that the stool stands still. What did I do well?: I making the 1 mm deep rectangle. I also did well in countersinking the holes well. What was the process for today?: I had to smooth the footstool and make the bottom of the stool smooth. What is next in the process?: Next class, I will try to paint Clamping my footstool. my stool and finish my project. What I can improve on?: I can improve on working faster. I can also improve on screwing the screw quick because it took me a whole lesson to do that. I can also improve on cleaning up fast. I also can improve on working on my own. I can improve on my drills skills as well. What was my emotion?: I was in a good mood because DT bring up my energy. What A.O.I and learner profile are you?: This was about human ingenuity by using some tools. I am a thinker because observe what we learn and follow the process. Level The Bottom Off Date: Friday , May 27th, 2011 Smoothing the bottom of the footstool off.
  28. 28. What did you do today?: Today I made the bottom of the smoothen and straight. I hadto used a smoothen plan to make the bottom straight and smooth. I also had to makesome final smoothing to the sharp edges. I had to use garnet paper to smooth of thesharp edges.What did you use?: I used a pencil to mark out the wood, bench hock, Smoothenplan , clamp,cordless drill, G-clamp, garnet paper with sanding block and bench vice.Why did I do this the way I did it?: I did it because I had to smooth the stool so thatthere is not sharp edges so that we don’t hurt ourselfs. Also I had to fill in the wood sothat there is no gaps in the wood. I also had to make the bottom of the lefs straight sothat the stool stands still. What did I do well?: I did well in smoothing the bottom of the legs straight so that itdoesn’t rock back and forth. I also had to smooth the sharp of edges so the no one hurtsthereself when using it.What was the process for today?: I had to make the bottom of the legs leveled so thatthe stool does not rock back and forth.What is next in the process?: Next class, I will try to paint my stool and finish myproject.What I can improve on?: I can improve on uses my time when I am waiting for help. Ialso can have everything set up and ready for everything to go. I also can improve onworking within the time givin.What was my emotion?: I was in a good mood because DT bring up my energy.What A.O.I and learner profile are you?: This was about human ingenuity by usingsome tools. I am a thinker because observe what we learn and follow the process. Smoothing And Painting StageDate: Monday , May 30th, 2011What did you do today?: Today I did the final smooth up to my footstool. I had to userough garnet paper to smooth off the sharp edges. I also had to find a book cover tomake my stool look more like a book. I picked lordloss because it is a good book. I alsostarted to paint my footstool.What did you use?: I used a pencil to mark out the wood, bench hock, Smoothenplan , garnet paper with sanding block, paint,paint brush, paint pallet and bench vice.
  29. 29. Why did I do this the way I did it?: I did it because I had to smooth the stool so thatthere is not sharp edges so that we don’t hurt ourselfs. I had to paint the stool so thatthe stool does not show that wood. Also I put the book cover so that the stool l will looklike a book.What did I do well?: I did well in smoothing the sharp edges off the footstool. I also didwell in picking the right book cover because it matched the color of the paint. I also didwell in smoothing all the sharp partsWhat was the process for today?: I had to smooth the sharp edges, print a bookcover and paint the stool.What is next in the process?: Next class, I will try to finish painting my stool and finishmy project.What I can improve on?: I can improve on uses my time when I am waiting for help. Ialso can have everything set up and ready for everything to go. I also can improve onworking within the time givin.What was my emotion?: I was in a good mood because DT bring up my energy.What A.O.I and learner profile are you?: This was about human ingenuity by usingsome tools. I am a thinker because observe what we learn and follow the process.

×