Soil stabilized,geosynthetic &cement concrete prestressed road


Published on

  • Be the first to comment

  • Be the first to like this

No Downloads
Total views
On SlideShare
From Embeds
Number of Embeds
Embeds 0
No embeds

No notes for slide

Soil stabilized,geosynthetic &cement concrete prestressed road

  1. 1. By :ANKIT KUMAR
  2. 2. soil stabilized roads Step1 Stabilization Soil stabilization is the process whereby soil and related materials are made stronger and more durable by mixing with stabilizing agents. The common method to achieve soil stabilization are: a) Stabilization by compaction b) Mechanical stabilization c) Stabilizing by the use of stabilizing additives like cement, lime, bitumen and many other stabilizers available in the market. Alternatively, you may use TopSeal- SoilStabilizer a Soil Stabilizer & Strengthener. 100% Environmentally safe Non-toxic, non-flammable non-corrosive, non-allergenic Water-based liquid form
  3. 3. Step 2 SeaIing The stabilized soil surface is then sealed with TopSeal SOIL SEALANT, providing a waterproof layer to prevent rain water penetration into the soil and keep the road in condition at all times. A stabilized soil road in dry condition will perform in its best condition with TopSeal Soil Sealant covered on soil surface, making it dust free and mud free at all times. Waterproof. No erosion by rainwater & traffic Maintain soil/gravel road strength even during rainy seasons Dust & mud free Minimum maintenance Not slippery, overcoming hilly road problems Seal stabilized soil surface using Top Seal Soil Sealant
  4. 4. Step 3Maintenance Patching any pothole or depression by mixing roadside soil with TopSeal-SoilStabilizer, followed by sealing a layer of TopSeal Soil Sealant on the affected area. Maintenance can be done as and when required for long-lasting road. Pothole & Depression Maintenance
  5. 5. Geo-synthetic RoadGeosynthetics are a class of building materials, which differ in structure, technology, performance characteristics, composition of raw materials. They are united by a convenient form of delivery (rolls, blocks, tiles), the ability to ensure a high quality geosynthetic materials in factory-built, that is, the ability to create additional layers (strata) of assured quality at the lowest labor costs for job site and minimum relative transport costs.
  6. 6.  The advantages of prestressed concrete have been known for some time. But the technique of prestressing concrete for highway use has presented problems. And although many authorities believe that a prestressed concrete highway should have many advantages over a conventional road, the problem has been to find economical method of building it.
  7. 7. PRESTRESSED CONCRETE  Prestressed concrete, invented by Eugene Frevssinet in 1928 is a method for overcoming concrete’’s natural weakness in tension . It can be used to produce beams , floors or bridges with a longer span than is practical with ordinary reinforced concrete.  It can be accomplished in three ways: pre- tensioned concrete, and bonded or unbonded. Pre-tensioned concrete  Pre-tensioned concrete is cast around already tensioned tendons.  This method produces a good bond between the tendon and concrete, which both protects the tendon from corrosion and allows for direct transfer of tension.  The cured concrete adheres and bonds to the bars and when the tension is released it is transferred to the concrete as compression by static friction.  However, it requires stout anchoring points between which the tendon is to be stretched and the tendons are usually in a straight line.  Thus, most pretensioned concrete elements are prefabricated in a factory and must be transported to the construction site, which limits their size.  Pre-tensioned elements may be balcony elements, lintels , floor slabs, beams or foundation piles.
  8. 8. PRESTRESSED CONCRETE PRINCIPLE – Using high tensile strength steel alloys producing permanent pre- compression in areas subjected to Tension. A portion of tensile stress is counteracted thereby reducing the cross-sectional area of the steel reinforcement . METHODS :- a) Pretensioning b)Post-tensioning PRETENSIONING :- Placing of concrete around reinforcing tendons that have been stressed to the desired degree. POST-TENSIONING :- Reinforcing tendons are stretched by jacks whilst keeping them in serted in voids left pre- hand during curing of concrete. These spaces are then pumped full of grout to bond steel tightly to the concrete. STEEL BARS BEING STRETCHED BY JACKS