1.
Dealing with Incomplete Data for
Mapping and Spatial Analysis
Aileen Buckley
Esri – Redlands
@mappingcenter
abuckley@esri.com
April 7 | Boston, MA
AAG 2017

2.
Workshop overview
• A little about missing data
• Methods for dealing with missing data
• A focus on imputation methods
• Analyzing the results of imputation methods

3.
Data “values” or lack thereof
VALUE MEANING
" " Blank
"NULL" Null
"NA", "N/A" Not Available or Not Applicable
"?", "UKN", "UNKNOWN" Unknown
"OTHER A selection from a multiple-choice survey or pull-down menu
"Not Answered" or "Not Provided" The question was asked, but the response was not provided
"0" Known zero
"Non-match" Not matched to other internal or external data sources
"Error" or "Undefined" Generated, for example, when dividing by zero
"-9999" or other numeric value out of range Not part of the recorded data or data outside the study area
"No data", "NoData", "NODATA" Data is absent
"---" or some other indicator Who knows? How can you be sure that you interpret this correctly?
Largest (or smallest) double integer
The largest (or smallest) integer that can be stored in a double field;
DBL_MAX or approximately 1.8 × 10308 (if the double is an IEEE 754 64-bit
double)

4.
Raster data
• Raster
- NoData = Outside of mapped
- 0 = Zero value
- -9999 = Masked out (don’t include in the
analysis)
- -9999 = Lack of information (e.g., cloud
cover or sensor malfunction)

5.
Vector data
• Existing data
enumeration units
are used
• Values for features
within the units are
recorded – or not!

6.
Reasons for missing data

7.
Collection problems
• Data may be missing because it cannot be collected
- For example, access to a location is denied or locations cannot be safely
accessed
• Data collection may be thwarted by regulations or restrictions
- For example, the maximum altitude for drones in the United States is currently
400 meters and drones can only be used in areas that are not designated as no-
fly zones
• Other times data cannot be collected because the features of interest
cannot be located

8.
• Sometimes the data are collected and then become compromised
when files are mishandled
- For example, values may be missing if a file was not copied completely
• Data manipulation, conversion, and merging can also result in
missing data
- For example, data stored in spreadsheet format may become corrupted when
converted to another format—values may be converted to NULL; leading or
trailing zeros may be stripped off; numeric values may be converted to strings
which cannot be used in calculations; or certain values may not be converted at
all
Handling problems

9.
• Some data types (for example, shapefiles) do not support null values,
so some other value will be substituted instead (for example, a null
integer is stored as a zero, and a null text string is stored as a space)
Handling problems
See blogs.arcgis.com  Formatting an Excel table for use with ArcGIS

10.
• A dataset may be complete but it does not contain data of the
desired type
- For example, with remote sensing data, clouds or topography may obscure the
data of interest
• Collected data may be questionable if the method of collection is
suspect
- This happens, for example, when sensors malfunction or are incorrectly
calibrated or when a person doesn’t adequately understand or correctly
interpret a survey question
Data problems

11.
• When the numbers of people or families used to compute the
demographic statistics are small, the data may be suppressed:
- to discourage misinterpretation and misuse of the statistics that are unstable
because of small numbers—those percentages and medians tend to have poor
reliability
- to protect the confidentiality of the people whose data are included in a report
by reducing or eliminating the risk of identity disclosure
Data suppression
Source: State Cancer Profiles, https://statecancerprofiles.cancer.gov/suppressed.html

12.
The implications of dealing with missing data
• Analyses of data sets with missing data are more complex than
analyses of complete data sets
• There is a lack of consistency among analyses if analysts compensate
for missing data in different ways or their analyses are based on
different subsets of data
• In some cases, incomplete data cannot be used to compute official
statistics (e.g., census)
• Statistical analyses can produce biased and misleading results

13.
• “Given the expense of collecting data, we cannot afford to start over
or to wait until we have developed foolproof methods of gathering
information (an unachievable goal).
• We find ourselves left with the decision of how to deal with the fact
that we do not have complete information for the entire data set.”
The conundrum
Source: Pigott,T.D. (2001) http://galton.uchicago.edu/~eichler/stat24600/Admin/MissingDataReview.pdf

14.
Dealing with missing data
Statistical methods

15.
Complete datasets
• One approach, and the simplest, is to use only those datasets with
complete information, though this sometimes means that the
question at hand cannot be adequately or fully answered, and if
alternative datasets do not exist, then the answer may not be
answered at all

16.
Complete cases
• Another approach is to use only those cases with complete
information
- Listwise deletion – drop the observation if the value for any variable is
missing; sometimes called “complete case analysis”
- Pairwise deletion – drop the observation if the value for the variable of
interest is missing; sometimes called “available case analysis”

17.
• “Researchers either consciously or by default in a statistical analysis
drop informants who do not have complete data on the variables of
interest.
• In statistical language, if the number of the cases is less than 5% of
the sample, then the researcher can drop them.”
Complete cases
http://www.statisticssolutions.com/missing-values-in-data/

18.
• This can exclude a large fraction of the original sample thereby
reducing the power of the statistical analysis because the number
number of observations (n) is reduced
• It is difficult to compare the results of analyses from pairwise
deletion because the sample will be different for each analysis
Listwise or pairwise deletion
Source: Soley-Bori, M. (2013), http://www.bu.edu/sph/files/2014/05/Marina-tech-report.pdf

19.
Imputation
• An alternative is to fill in a plausible value for the missing
observations, such as using the mean of the observed cases on that
variable; this is called imputation
• This is a way to avoid pitfalls involved with listwise or pariwise
deletion because imputation preserves all cases by replacing missing
data with an estimated value based on other available information

20.
Geoimputation
• Geoimputation or geographical imputation methods are used
to replace missing values in spatial data by assigning a
value for the missing data using both the characteristics of the
and the characteristics from:
- a larger geographic aggregate area (this can be either global or
geoimputation), or
- nearby areas in which the unit is located (this is local geoimputation)

21.
• “More recently, statisticians have advocated methods that are based
on distributional models for the data.”
• These advanced methods include:
- Multiple imputation
- Maximum likelihood
- Baysian simulation
- Hot deck imputation
Other approaches
Source: Pigott,T.D. (2000), http://galton.uchicago.edu/~eichler/stat24600/Admin/MissingDataReview.pdf

22.
• “They lead to an underestimation of standard errors and, thus,
overestimation of test statistics.
• The main reason is that the imputed values are completely
determined by a model applied to the observed data, in other words,
they contain no error.”
Limitations of imputation techniques in general
Source: Allison, P. D. (2000). Multiple Imputation for Missing Data: A CautionaryTale. Sociological Methods & Research, 28(3), 301-309.

23.
A special note about
census data

24.
• There are three common reasons:
- Household or unit nonresponse
- Person nonresponse
- Item nonresponse
Missing values in census data
Source: https://www.census.gov/spd/types.html

25.
• Missing data for a household or unit occurs when an enumerator is
able to find an address but is unable to obtain any census data
- This may happen because no one is at home or no one is willing or able to
participate in the survey
- It can also occurs when the people at the address have moved to an unknown
or unavailable address
• In these cases, a nonresponse is dealt with through weighting
adjustments
Household or unit nonresponse
Source: https://www.census.gov/spd/types.html

26.
• Missing data for a person occurs when data is collected from one but
not all people in a household or unit
- This can happen because someone is not willing, able, or available to
participate in the survey
• Missing values are imputed or edited (logically inferred from other
data that have been provided)
Person nonresponse
Source: https://www.census.gov/spd/types.html

27.
• Missing data for an item or question in the survey occurs when a
person completes part of the survey but does not answer one or more
individual questions
- This can occur if a person is unwilling or unable to provide the requested
information; a person forgets to answer a question; a response is logically
inconsistent; an enumerator fails to ask a question or record an answer; or an
enumerator erroneously records the response
• Missing values are generally imputed in these cases
Item nonresponse
Source: https://www.census.gov/spd/types.html

28.
General principles for
dealing with missing data
Imputation

29.
Map the data
• Determine if the missing data is:
1. Clustered
2. At the core
3. At the perimeters
• All of these are red flags  check the data collection and handling
methods

30.
Explore the data
• What value(s) are used to represent missing data?
• How many records contain missing values?
• What is the range of values? Are there “hard max or min values?
• What variability is in the values?
• Are there outlier?
• It is risky to work with missing data:
- when there is too much of it  5% of the data or more
- when it is on the tails of the distribution

31.
43/3108 = 1.38%FREQUENCY 3108.00
SUM 546226.90
MEAN 178.56
MIN 59.70
MAX 362.80
RANGE 303.10
STD 506.87

32.
Consider how the data will be used
• If it is for visualization only (e.g., a map), the results of dealing with
missing data (e.g., imputation) may not be visible because of the
mapping process itself (e.g., classification)
• How will the results be used?What are the implications for using
results with data that was “invented”?

33.
Geoimputation methods

34.
Geoimputation methods demonstrated in this workshop
- Global method
- Impute from the a global statistic of the dataset
- Regional method
- Impute from the state rate
- Local methods
- Impute from polygon neighbors
- Impute from an areal interpolation surface
- Impute usingThiessen polygons
- Impute using the Fill MissingValues tool

35.
Impute from a global value
• Substitute the global statistical value for the missing values
• For example, global mean

36.
Impute from a regional value
• Substitute the regional statistical value for the missing values
- For example, state rate

37.
Impute from an areal interpolation surface
• Use areal interpolation to create a surface from the known values
• Substitute the values at the location of the polygon centroid for the
missing values

38.
Impute from polygon neighbors
• Use the values of the neighboring polygons to calculate a mean
• Substitute the neighborhood mean for the missing values

39.
Demos

40.
Impute using the Fill Missing Values tool
• Use the imputation tool available in the next release of ArcGIS Pro
• A variety of options for how to impute the missing values

41.
Fill Missing Values tool
• Easy to use
• Handles both space and time
• Many options for the parameters
- Impute multiple values
- Different neighborhoods

42.
Demo

43.
Best practices for imputing data

44.
Choose the best type to represent the data
• Points
• Lines
- FeatureVerticesTo Points with the MID option -- a point will be created at the
midpoint, not necessarily a vertex, of each input line or polygon boundary
• Polygons
- FeatureTo Point with CENTROID option = the output point
will be located at the center of gravity (centroid) of the polygon
- FeatureTo Point with INSIDE option = the output point will be
inside the polygon

45.
Choose the best fill method
• Average
• Minimum
• Maximum
• Median
• TemporalTrend

46.
Choose the best fill method
• Pick the option that makes the most sense for the data
- Average – useful for many cases
- Minimum – when you don’t want to overexaggerate (% people with a graduate
degree)
- Maximum – when you don’t want to underestimate (e.g., % of children in
school lunch programs)
- Median – when there are extremes or outliers (e.g., housing value)

47.
Choose the best conceptualization of spatial relationships
• Pick the option that
makes the most sense
for the data
- Insect infestation 
Contiguity
- Real estate market 
Distance Band

48.
For inverse distance weighted (with the Fill Missing Values
tool)
• Generate Spatial Weights Matrix
- Use this to generate a matrix that includes the distance to neighboring points
or polygon centroids
• Generate Network Spatial Weights

49.
Evaluating the results

50.
Evaluate the results of imputation
• Check the number and percentage of values imputed
- Are any still missing? If so, where are they?
• Don’t impute from imputed values (otherwise you are “inventing”
data from “invented” data)
- You might be tempted to do this when all missing values are not imputed (e.g.,
a feature with a missing value is surrounded by others with missing values)
- Alternatives:
- Change the parameters (e.g., the number of neighbors or size of neighborhood)
- Use a different method (e.g., global or regional geoimputation; areal interpolation)

51.
Compare distributions
• Examine the distribution of the data set before and after imputation
(i.e., the histogram and descriptive statistics)
- This tells you how much imputation changed the global distribution
• Map the standard deviation
- This tells you how different the imputed values are from those used in the
imputation (the neighbors)
• Look for regional applicability/inapplicability of the imputation
method
- This tells you if the method works in some areas but not others

52.
Perform sensitivity analysis
• Perform sensitivity analyses to assess how sensitive results are to
reasonable changes in the methods and paramters used
1. Perform your analysis
2. Impute the missing values
3. Perform the analysis again
4. Compare the results

53.
Evaluate the results of the sensitivity analysis
• If there is a lot of variability, try a different approach
- For example:
- try using a larger neighborhood or more neighbors
- try using a different method (e.g., areal interpolation)

54.
Consider the implications of imputation on the results
• Imputation fails to acknowledge uncertainty in the imputed values
• Typically, imputation results in narrower confidence intervals,
underestimation of standard errors and, thus, overestimation of
overestimation of test statistics

55.
• Make explicit the assumptions of any methods used to cope with
missing data, for example, that the data were assumed missing at
random, or that missing values were assumed to have a particular
value, such as a poor outcome
• Address the potential impact of missing data on the findings in your
Discussion
• Indicate on the map which features had missing data
When communicating the results
Source: Higgins & Green (2011),
http://handbook.cochrane.org/chapter_16/16_1_2_general_principles_for_dealing_with_missing_data.htm

56.
Thank you!
Aileen Buckley
Esri – Redlands
abuckley@esri.com
@mappingcenter