8447779800, Low rate Call girls in Tughlakabad Delhi NCR
ISO Standards for Fire Safety
1. ISO STANDARDS ON
FIRE SAFETY
Ali Irfan Khawaja
Director, FPAP
Manager Technical, NQA Pakistan
2. PRESENTATION COVERS …….
History of Fire Safety Legislations.
History of ISO and standardization.
Fire Safety standardization
ISO standards on fire Safety
4. History of Fire Legislations
1900 :
Report from the Select Committee on Fire Brigades
1923:
Report of the Royal Commission on Fire Brigades
and Fire Prevention
1947 :
Fire service act
1971:
The Fire Precautions (Workplace) Regulations 1971
5. Major contributors of Fire Safety
Standardization / Codes
•
•
•
•
•
•
FPA – UK
NFPA-USA
FPA-NZ
Canadian fire safety association
IMO
FPA-Pakistan
7. ISO History
ISO (International Organization for Standardization) is the world’s
largest developer of voluntary International Standards.
8. ISO History
founded in 1947, with 67 official TCs
and since then have published more
than 19 500 International Standards
covering almost all aspects of
technology and business.
9. ISO History
Today ISO have members from 164 countries and about 150 people
work full time for ISO Central Secretariat in Geneva, Switzerland.
11. Technical Committee (TC)
The technical work is carried out
through technical committees
(TC's) which are established by
the Technical Management
Board (TMB).
TC's establish their own
subcommittees (SC's) and
working groups (WG's) to
undertake the work.
Each and SC has a secretariat
assigned to a member body for
eg. BSI, DIN, AFNOR, ANSI,
JISC, UKAS, NQA etc
12. Technical Committee (TC)
TC
92 – Fire Safety
TC 92 / SC1 - Fire Initiation and Growth.
TC 92 / SC2 - Fire Containment
TC 92 / SC3 - Fire Threat to People and Environment
TC 92 / SC4 - Fire Safety Engineering
14. ISO Standards …….
ISO/TS 13447:2013
Fire safety engineering -- Guidance for use of fire zone models
ISO 16730:2008
Fire safety engineering -- Assessment, verification and
validation of calculation methods.
ISO 13943:2008
Fire safety -- vocabulary
ISO 23932:2009
Fire safety engineering -- General principles
ISO/TS 24679:2011
Fire safety engineering -- Performance of structures In fire
15. ISO Standards …….
ISO/NP 16730-1
Fire safety engineering -- Assessment, verification and
validation of calculation methods -- Part 1: General.
ISO/TR 16730-2:2013
Fire safety engineering -- Assessment, verification and
validation of calculation methods -- Part 2: Example of a
fire zone model.
ISO/TR 16730-3:2013
Fire safety engineering -- Assessment, verification and
validation of calculation methods -- Part 3: Example of a
computerized fluid dynamics (CFD) model
16. ISO Standards …….
ISO/TR 16730-4:2013
Fire safety engineering -- Assessment, verification and
validation of calculation methods -- Part 4: Example of a
structural model
ISO/TR 16730-5:2013
Fire safety engineering -- Assessment, verification and
validation of calculation methods -- Part 5: Example of an
Egress model
17. ISO Standards …….
ISO 16732-1:2012
Fire safety engineering -- Fire risk assessment -Part 1: General
ISO/TR 16732-2:2012
Fire Safety Engineering -- Fire risk assessment -Part 2: Example of an office building
ISO/TR 16732-3:2013
Fire safety engineering -- Fire risk assessment -Part 3: Example of an industrial property
18. ISO Standards …….
ISO/NP 16733-1
Fire safety engineering -- Selection of design fire
scenarios and design fires -- Part 1: General
ISO 16734:2006
Fire safety engineering -- Requirements
governing algebraic equations -- Fire plumes
ISO 16735:2006
Fire safety engineering -- Requirements
governing algebraic equations -- Smoke layers
19. ISO Standards …….
ISO 16736:2006
Fire safety engineering -- Requirements
governing algebraic equations -- Ceiling jet flows
16737:2012
Fire safety engineering -- Requirements
governing algebraic equations -- Vent flows
ISO/TR 16738:2009
Fire-safety engineering -- Technical information
on methods for evaluating behavior and
movement of people
20. ISO Standards …….
ISO 14520-1:2006
Gaseous fire-extinguishing systems -- Physical
properties and system design -- Part 1: General
requirements
ISO 7745:2010
Hydraulic fluid power -- Fire-resistant (FR) fluids
-- Requirements and guidelines for use
ISO 7010:2011
Graphical symbols -- Safety colours and safety
signs -- Registered safety signs
21. ISO Standards …….
ISO 3864-1:2011
Graphical symbols -- Safety colours and safety
signs -- Part 1: Design principles for safety signs
and safety markings
ISO 3864-3:2012
Graphical symbols -- Safety colours and safety
signs -- Part 3: Design principles for graphical
symbols for use in safety signs
ISO 3864-4:2011
Graphical symbols -- Safety colours and safety
signs -- Part 4: Colorimetric and photometric
properties of safety sign materials