<ul><li>Networking </li></ul><ul><li>This module introduces you to the fundamentals of networking Notifier Fire Alarm Syst...
<ul><li>Introduction: </li></ul><ul><li>A  NOTI∙ FIRE ∙NET  network links multiple Notifier Intelligent Fire Alarm control...
<ul><li>NOTI∙FIRE∙NET </li></ul><ul><li>Notifier Networks can be comprised of peer-to-peer clients on a Local Network (LAN...
<ul><li>NOTI∙FIRE∙NET </li></ul><ul><li>  NOTI∙ FIRE ∙NET supports all ONYX Series fire alarm control panels. It is also b...
<ul><li>Network Topology </li></ul><ul><li>The NOTI∙ FIRE ∙NET can be configured either as POINT-TO-POINT connection or a ...
<ul><li>Network Topology </li></ul><ul><li>A  BUS  configuration has between THREE or SEVEN nodes connected along its segm...
<ul><li>Network Control Module </li></ul><ul><li>Systems in a NOTI∙ FIRE ∙NET network must be physically interconnected by...
<ul><li>NCM Mounting </li></ul><ul><li>A NCM can be mounted in several ways depending upon the application.  </li></ul><ul...
<ul><li>High Speed NCM </li></ul><ul><li>HS-NCM  Series Network Control Modules increase the node capacity of NOTI∙ FIRE ∙...
<ul><li>High Speed NCM </li></ul><ul><li>These are the HS-NCM Series Part Numbers: </li></ul><ul><li>HS-NCM-MF Multimode F...
<ul><li>High Speed NCM </li></ul><ul><li>Each HS-NCM has the following connections: </li></ul><ul><ul><li>Two Notifier Uni...
<ul><li>Cooperative Control-By-Event </li></ul><ul><li>Programming of required interaction between control panels within N...
<ul><li>Network Devices </li></ul><ul><li>There are also other components that provide network control, anunciation and mo...
<ul><li>NCA-2 </li></ul><ul><li>The  NCA-2 Network Control Annunciator  is used to display event information from anywhere...
<ul><li>NCA-2 Mounting </li></ul><ul><li>The NCA-2 can be remotely mounted in an ABS-2D cabinet, wich provide sufficient t...
<ul><li>Network Application </li></ul><ul><li>The next figure ilustrates a network of three NFS2-640 control panels. </li>...
<ul><li>Network Application </li></ul><ul><li>The NCA-2´s common busses make it possible for a single device to report net...
<ul><li>CPU Mainboard components </li></ul>Relays Form-C Relays are provided on Terminals TB1-TB4. The contacts are rated ...
<ul><li>CPU Mainboard components </li></ul>Reconfiguring Relays The Security relay (TB1) and the Supervisory relay (TB2) c...
<ul><li>CPU Mainboard components </li></ul>VeriFire Tools VeriFire Tools is a Microsoft Windows based programming and test...
<ul><li>CPU Mainboard components </li></ul>ACS Bus TB9 provides a supervised connection to ACS-Type annunciators.
<ul><li>CPU Mainboard components </li></ul>Remote Data Port TB9 is the Remote Data Port (RDP) for connection of LCD 160 Re...
<ul><li>CPU Mainboard components </li></ul>Printer Bus The three left –most terminals on TB5 provide for a connection to a...
<ul><li>CPU Mainboard components </li></ul>Network Connection A Notifier Universal Protocol (NUP) port is used to interfac...
<ul><li>CPU Mainboard components </li></ul>Security Switch A normally-closed input is provided for connection of a Securit...
<ul><li>CPU Mainboard components </li></ul>Trouble Bus The CPU2-3030 contains an input for the receipt of auxiliary troubl...
<ul><li>CPU Mainboard components </li></ul>Accessory Power TB6   provides two 24 VDC outputs for powering devices within t...
<ul><li>CPU Mainboard components </li></ul>Backup Battery This lithium battery provides backup of the NCA-2´s on-board mem...
<ul><li>CPU Mainboard components </li></ul>Power Harness Power for the NCA-2 is fed from the main power supply through a c...
<ul><li>NCA-2 Keypad / Display </li></ul><ul><li>The user interface features a 640-character Liquid Crystal Display and st...
<ul><li>NCA-2 Keypad / Display </li></ul>Nine keys in the upper right-hand portion of the keypad provide keys functions.  ...
<ul><li>Alphanumeric Keys </li></ul>The alphanumeric portion of the keypad is in standard QWERTY format.  The keypad is fu...
<ul><li>Soft Keys </li></ul>The soft keys are ten keys to the right and left of the Liquid Crystal Display.  The function ...
<ul><li>ONYXWorks </li></ul><ul><li>The  ONYXWorks Workstation  is a PC-based graphical workstation that links fire alarm,...
<ul><li>ONYXWorks </li></ul><ul><li>The integration interface is the  Echelon Gateway . This gateway communicates over a l...
<ul><li>NOTI∙ FIRE ∙NET Web Server </li></ul><ul><li>The  NOTI∙ FIRE ∙NET Web Server  (NWS) is designed to offer facility ...
<ul><li>NOTI∙ FIRE ∙NET Web Server </li></ul><ul><li>The  Web Server  contains the following components: </li></ul><ul><ul...
<ul><li>ONYX FirstVision </li></ul><ul><li>ONYX FirstVision  is a PC-based touch screen that displays critical graphical i...
<ul><li>ONYX FirstVision </li></ul><ul><li>ONYX FirstVision can also replace annunciators, which are noramally more expens...
<ul><li>NOTI∙ FIRE ∙NET Web Server </li></ul><ul><li>The image below shows an ONYX FirstVision system with IP connection o...
<ul><li>Summary </li></ul><ul><li>The following devices and concepts were attended: </li></ul><ul><ul><li>NOTI∙ FIRE ∙NET ...
Upcoming SlideShare
Loading in …5
×

Networking

2,727 views

Published on

Published in: Technology, Business
0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total views
2,727
On SlideShare
0
From Embeds
0
Number of Embeds
89
Actions
Shares
0
Downloads
0
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide
  • NFS2-3030
  • NFS2-3030
  • NFS2-3030
  • NFS2-3030
  • NFS2-3030
  • NFS2-3030
  • NFS2-3030
  • NFS2-3030
  • NFS2-3030
  • NFS2-3030
  • NFS2-3030
  • NFS2-3030
  • NFS2-3030
  • NFS2-3030
  • NFS2-3030
  • NFS2-3030
  • NFS2-3030
  • NFS2-3030
  • NFS2-3030
  • NFS2-3030
  • NFS2-3030
  • NFS2-3030
  • Networking

    1. 1. <ul><li>Networking </li></ul><ul><li>This module introduces you to the fundamentals of networking Notifier Fire Alarm Systems. </li></ul>NETWORKING
    2. 2. <ul><li>Introduction: </li></ul><ul><li>A NOTI∙ FIRE ∙NET network links multiple Notifier Intelligent Fire Alarm control panels together in the network. </li></ul><ul><li>Network options for NOTIFIER include graphical annunciation, building system integration and remote monitoring capabilities. </li></ul><ul><li>The NOTI∙ FIRE ∙NET can consist of a maximum of 103 nodes. When set up to provide live paging from a DVC node, then it reduces to a maximum of 54 nodes. </li></ul>
    3. 3. <ul><li>NOTI∙FIRE∙NET </li></ul><ul><li>Notifier Networks can be comprised of peer-to-peer clients on a Local Network (LAN) and enhanced into a Wide Area Network (WAN) connecting two or more LANs through leases lines or satelites. </li></ul><ul><li>In a peer-to-peer network each separate system has the same capabilities, and can initiate a communications session without a server or command center. </li></ul>
    4. 4. <ul><li>NOTI∙FIRE∙NET </li></ul><ul><li> NOTI∙ FIRE ∙NET supports all ONYX Series fire alarm control panels. It is also backward compatible with the existing legacy system fire alarm panels. </li></ul>ONYX Series
    5. 5. <ul><li>Network Topology </li></ul><ul><li>The NOTI∙ FIRE ∙NET can be configured either as POINT-TO-POINT connection or a BUS connection. </li></ul><ul><li>A POINT-TO-POINT segment has ONLY TWO nodes attached to it. </li></ul><ul><li>The wire segment distance is dependant on the wire manufacturer, and the susceptibility to noice interference. A fiber segment must meet the maximum of 8 dB signal loss per segment. </li></ul>POINT-TO-POINT connection NODE 1 NODE 2 NODE 3
    6. 6. <ul><li>Network Topology </li></ul><ul><li>A BUS configuration has between THREE or SEVEN nodes connected along its segment, and is limited to a maximum total length of 100 feet from the first to last node. </li></ul><ul><li>A BUS segment cannot be utilized for a Style 7 (Class A) configuration, since in Class A configuration each channel on each node can be connected to one another node. </li></ul>Bus connection NODE 1 NODE 2 NODE 3 NODE 4
    7. 7. <ul><li>Network Control Module </li></ul><ul><li>Systems in a NOTI∙ FIRE ∙NET network must be physically interconnected by using network cards. The particular network card used is dependant on the fire alarm system product. </li></ul><ul><li>All ONYX systems, including the Digital Voice Command (DVC), requiere a Network Module (NCM) , either wire or fiber. </li></ul><ul><li>The wiring connection, external to the node, can be either a NFPA Syle 4 (Class B) or NFPA Style 7 (Class A). </li></ul>NCM-F
    8. 8. <ul><li>NCM Mounting </li></ul><ul><li>A NCM can be mounted in several ways depending upon the application. </li></ul><ul><li>In a NFS2-3030 the NCM can be mounted on the right side of the CHS-M3 chassis. </li></ul><ul><li>In a NFS2-640, it can be mounted on the right side of the CHS-M2 chassis. </li></ul>
    9. 9. <ul><li>High Speed NCM </li></ul><ul><li>HS-NCM Series Network Control Modules increase the node capacity of NOTI∙ FIRE ∙NET and provide several enhancements over the standard NCM series. </li></ul><ul><ul><li>Increase count to 200+ node addresses (maximum node count with NCM series is 102, 54 nodes in digital Audio Applications). </li></ul></ul><ul><ul><li>Single-Channel Digital Audio over NOTI∙ FIRE ∙NET. </li></ul></ul><ul><ul><li>HS-NCM can have two addresses per module. </li></ul></ul><ul><ul><li>ONYX Series Compatible (8th and 9th edition). </li></ul></ul><ul><ul><li>Flash memory. </li></ul></ul><ul><ul><li>Maximum 3´000 feet between nodes. </li></ul></ul><ul><ul><li>Data is regenerated at each node, enabling an HS-NCM module to function as a network repeater (configured with a network address of “0”). </li></ul></ul>
    10. 10. <ul><li>High Speed NCM </li></ul><ul><li>These are the HS-NCM Series Part Numbers: </li></ul><ul><li>HS-NCM-MF Multimode Fiber Module </li></ul><ul><li>HS-NCM-MFSF Multimode/Singlemode </li></ul><ul><li>HS-NCM-SF Singlemode Fiber module </li></ul><ul><li>HS-NCM-W Wire module </li></ul><ul><li>HS-NCM-WMF Wire/Multimode Fiber module </li></ul><ul><li>HS-NCM/WSF Wire/Singlemode Fiber module </li></ul><ul><li>Note: The HS-NCM is NOT compatible with the standard NOTI∙ FIRE ∙NET employing NCM Series Network modules. </li></ul>
    11. 11. <ul><li>High Speed NCM </li></ul><ul><li>Each HS-NCM has the following connections: </li></ul><ul><ul><li>Two Notifier Universal Protocol (NUP) ports that can be used to interconnect ONYX fire alarm control panels, the NCA-2, a Digital Voice Controller (DVC), VeriFire Tools and/or an Ethernet/TCP/IP gateway. </li></ul></ul><ul><ul><li>Two USB connections – one Host Standard A and one ON-THE-GO Mini AB that also allow for the connection of VeriFire Tools. </li></ul></ul><ul><ul><li>External power connection (for use as a remote repeater). </li></ul></ul><ul><ul><li>Ethernet port for future diagnostics </li></ul></ul>Channel A Ground Fault Detection Switches Channel B USB Ports NUP Ports External Power Connection
    12. 12. <ul><li>Cooperative Control-By-Event </li></ul><ul><li>Programming of required interaction between control panels within NOTI∙ FIRE ∙NET is known as Cooperative-Control-By-Event (CCBE). Performed at the local panel. CCBE adds nodal information to the software zone programming, allowing commands to be sent along the network to other systems and network annunciators. The local panel is programmed to active its output due to an incoming event from a distant panel(node). </li></ul>
    13. 13. <ul><li>Network Devices </li></ul><ul><li>There are also other components that provide network control, anunciation and monitoring capabilities: </li></ul><ul><li>The NCA-2 Network Control Annunciator provides control and annunciation capabilities anywhere within the network. </li></ul><ul><li>The NOTI∙ FIRE ∙NET Web Server (NWS) provides remote read status capabilities, as well as email and text messaging over the World Wide Web (WWW). </li></ul><ul><li>ONYX FirstVision is an intuitive touch screen display for first responders to access during an emergency. </li></ul>
    14. 14. <ul><li>NCA-2 </li></ul><ul><li>The NCA-2 Network Control Annunciator is used to display event information from anywhere on the network. These are some of its features: </li></ul><ul><li>The 640-character scre en allows the operator to view more information about an in-progress system event. </li></ul><ul><li>The NCA-2 provides support for non english languages. </li></ul><ul><li>Normally, at least one NCA-2 is intalled in a NOTI∙ FIRE ∙NET network. </li></ul>
    15. 15. <ul><li>NCA-2 Mounting </li></ul><ul><li>The NCA-2 can be remotely mounted in an ABS-2D cabinet, wich provide sufficient to mount its associated NCM. </li></ul><ul><li>The NCA-2 can be mounted either an ABS-2D (shown image) or a Dress Panel, or also as a primary Display rather than a KDM-R2 for a NFS2-640, in this case, the NCA-2 is not used as a Netowrk Device. </li></ul><ul><li>When used in a voice evacuation system, the NCA-2 can be mounted on the top half of the CA-2 Chassis. </li></ul>NCA-2 in Dress Panel
    16. 16. <ul><li>Network Application </li></ul><ul><li>The next figure ilustrates a network of three NFS2-640 control panels. </li></ul><ul><li>The NCA-2 provides full annunciation of the network. </li></ul><ul><li>Each of the four network nodes requires aN NCM card. </li></ul><ul><li>Each segment can be up to 3´000 feet in length. An PT Series Repeater Module can extend this lenght. </li></ul>NCM-W NCM-W NCM-W NCM-W NCA-2 NFS2-640 NFS2-640 NFS2-640 NFN
    17. 17. <ul><li>Network Application </li></ul><ul><li>The NCA-2´s common busses make it possible for a single device to report network-wide activity from a single location. </li></ul><ul><li>The diagram shows a UDACT Digital Commnicator reporting to a central Station. </li></ul>NCM NCM NCM NCM NCA-2 NFS2-640 NFS2-640 NFS2-640 UDACT Central of monitoring and control NFN
    18. 18. <ul><li>CPU Mainboard components </li></ul>Relays Form-C Relays are provided on Terminals TB1-TB4. The contacts are rated for 2 amps at 30 VDC (resistive load).
    19. 19. <ul><li>CPU Mainboard components </li></ul>Reconfiguring Relays The Security relay (TB1) and the Supervisory relay (TB2) can be reconfigured as Alarm relays by changing the position of switches SW1 and SW2 respectively.
    20. 20. <ul><li>CPU Mainboard components </li></ul>VeriFire Tools VeriFire Tools is a Microsoft Windows based programming and test utility with online and offline capabilities. Connection between the computer and CPU2-3030 is made through a USB cable plugged into a connector J15 (Type “B” cable), J14 (Mini USB) or with a NUP cable into the J1 NUP port.
    21. 21. <ul><li>CPU Mainboard components </li></ul>ACS Bus TB9 provides a supervised connection to ACS-Type annunciators.
    22. 22. <ul><li>CPU Mainboard components </li></ul>Remote Data Port TB9 is the Remote Data Port (RDP) for connection of LCD 160 Remote Annunciators. The connection is supervised.
    23. 23. <ul><li>CPU Mainboard components </li></ul>Printer Bus The three left –most terminals on TB5 provide for a connection to an isolated serial printer. PTX (transmit), PRX (receive), REF (reference). A Keltron printer can be connected to the CTX/CRX terminal (second from right).
    24. 24. <ul><li>CPU Mainboard components </li></ul>Network Connection A Notifier Universal Protocol (NUP) port is used to interface the NCA-2 to NOTI ∙ FIRE ∙ NET via an NCM-W or NCM-F Network Control Module.
    25. 25. <ul><li>CPU Mainboard components </li></ul>Security Switch A normally-closed input is provided for connection of a Security Tamper Switch (STS-1) to monitor unauthorized access to the control panel cabinet. This input is enabled by via programming.
    26. 26. <ul><li>CPU Mainboard components </li></ul>Trouble Bus The CPU2-3030 contains an input for the receipt of auxiliary trouble signals on J6. A short on this input generates a trouble signal.
    27. 27. <ul><li>CPU Mainboard components </li></ul>Accessory Power TB6 provides two 24 VDC outputs for powering devices within the fire alarm cabinet as the NCA-2. The power for these outputs comes from the main power supply or secondary power source (batteries).
    28. 28. <ul><li>CPU Mainboard components </li></ul>Backup Battery This lithium battery provides backup of the NCA-2´s on-board memory during total loss of power. The battery has a typical life span of 10 years.
    29. 29. <ul><li>CPU Mainboard components </li></ul>Power Harness Power for the NCA-2 is fed from the main power supply through a cable assembly that connects to J13.
    30. 30. <ul><li>NCA-2 Keypad / Display </li></ul><ul><li>The user interface features a 640-character Liquid Crystal Display and status indicator LEDs. Take a look at the picture, the LEDs are shown in the left part of it. </li></ul><ul><li>Note: The description of each one of the LEDs is exactly the same as the Display of the NFS2-3030. </li></ul>
    31. 31. <ul><li>NCA-2 Keypad / Display </li></ul>Nine keys in the upper right-hand portion of the keypad provide keys functions. Note: The description of each one of these keys is exactly the same as the Display of the NFS2-3030.
    32. 32. <ul><li>Alphanumeric Keys </li></ul>The alphanumeric portion of the keypad is in standard QWERTY format. The keypad is functional mainly when an entry is requested by the system, such as when entering a password, or device address.
    33. 33. <ul><li>Soft Keys </li></ul>The soft keys are ten keys to the right and left of the Liquid Crystal Display. The function of each key changes to suit a particular screen.
    34. 34. <ul><li>ONYXWorks </li></ul><ul><li>The ONYXWorks Workstation is a PC-based graphical workstation that links fire alarm, security, CCTV and other key information within a facility. </li></ul><ul><li>ONYXWorks is a single point of control for the life safety and security systems throughout a building, city, state or worldwide, using local (LAN´s) or wide(WAN´s) Area Networks. </li></ul><ul><li>ONYXWorks displays facility floor plans for fire and non-fire reporting, as well as event histories. </li></ul>
    35. 35. <ul><li>ONYXWorks </li></ul><ul><li>The integration interface is the Echelon Gateway . This gateway communicates over a local or remote LonWorks network. </li></ul><ul><li>A Network Input Out Node (NION) provides serial communications between monitored equipment and the LonWorks network. </li></ul><ul><li>When it is required to connect nodes in larger applications it is also normally used the business Ethernet network by using NCB-EL/FL routers to convert LonWorks to TCP/IP. </li></ul>
    36. 36. <ul><li>NOTI∙ FIRE ∙NET Web Server </li></ul><ul><li>The NOTI∙ FIRE ∙NET Web Server (NWS) is designed to offer facility managers the capability of remotely viewing their network of fire alarm control panels. Using the Internet or an Intranet, facility managers can access information of their control panels directly from their personal computers. </li></ul><ul><li>The system´s graphical interface allows operators to track the system status, view the event history, device porperties, and other information. It also offers: </li></ul><ul><li>- Monitor the system from anywhere at any time. </li></ul><ul><li>- Email vital alarm information to those who need to take action. </li></ul><ul><li>- Secure password connected protection. </li></ul><ul><li>- Remote Control Panel Read Status. </li></ul><ul><li>- Remote Diagnostcs – Service Contract Tool. </li></ul><ul><li>- Interfaces to a standalone control panel or a network. </li></ul>Web Server integrated to a network
    37. 37. <ul><li>NOTI∙ FIRE ∙NET Web Server </li></ul><ul><li>The Web Server contains the following components: </li></ul><ul><ul><li>NCM-W or NCM-F Network card </li></ul></ul><ul><ul><li>Single-Board Computer </li></ul></ul><ul><ul><li>Power Supply </li></ul></ul><ul><ul><li>Surge Protector </li></ul></ul><ul><ul><li>CHS-4L Chassis (for mounting on a CAB-4 Series enclosure) </li></ul></ul><ul><li>The NOTI∙ FIRE ∙NET Web Server interface looks like the right-down image. </li></ul>
    38. 38. <ul><li>ONYX FirstVision </li></ul><ul><li>ONYX FirstVision is a PC-based touch screen that displays critical graphical information about the origin and spread of the fire allowing firefighters and emergency responders to quickly locate the thread. </li></ul><ul><li>The ONYX FirstVision provide the location of all fire alarm devices, water supplies, evacuation routers, access routes, fire barrier gas, power and HVAC shutoffs, as well as chemical and structural hazards. </li></ul>ONYX FirstVision interface (status: all normal)
    39. 39. <ul><li>ONYX FirstVision </li></ul><ul><li>ONYX FirstVision can also replace annunciators, which are noramally more expensive, and do not offer the same advantages. </li></ul>ONYX FirstVision interface (status: alarmed)
    40. 40. <ul><li>NOTI∙ FIRE ∙NET Web Server </li></ul><ul><li>The image below shows an ONYX FirstVision system with IP connection over Ethernet to receive information from the NOTI∙ FIRE ∙NET. </li></ul>
    41. 41. <ul><li>Summary </li></ul><ul><li>The following devices and concepts were attended: </li></ul><ul><ul><li>NOTI∙ FIRE ∙NET </li></ul></ul><ul><ul><li>Network Topology </li></ul></ul><ul><ul><li>Network Control Module </li></ul></ul><ul><ul><li>NCM Mounting Options </li></ul></ul><ul><ul><li>High-Speed NCM </li></ul></ul><ul><ul><li>Cooperative Control-By-Event </li></ul></ul><ul><ul><li>Network devices </li></ul></ul><ul><ul><li>NCA-2 </li></ul></ul><ul><ul><li>NCA-2 Mounting options </li></ul></ul><ul><ul><li>Network Application </li></ul></ul><ul><ul><li>NCA-2 Circuit Board </li></ul></ul><ul><ul><li>NCA-2 Keypad/Display </li></ul></ul><ul><ul><li>ONYXWorks </li></ul></ul><ul><ul><li>NOTI∙ FIRE ∙NET Web Server </li></ul></ul><ul><ul><li>ONYX First Vision </li></ul></ul>

    ×