Questions unit2 ch3

795 views

Published on

Unsolved questions from Unit 2, Inductance calculations.

Published in: Education
0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total views
795
On SlideShare
0
From Embeds
0
Number of Embeds
2
Actions
Shares
0
Downloads
32
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

Questions unit2 ch3

  1. 1. Chapter 3 Questions Q1. A wire 4mm in diameter is suspended at a constant height 10m above sea level which constitutes the return conductor. Calculate the inductance of the system per km. [1.89mH] Q2. In the fig. (1 phase, double circuit), given below, find inductance per km length of the line. Dia of each conductor is 2 cm. [1.17mH] Q3. If dia is 8mm, find the inductance per km of the line. [1.54mH] Q4. A 3 phase 3-wire system consisting of 12.50mm dia conductors spaced 3m apart in a horizontal plane supplies a balanced load. Calculate the inductance per KM of each conductor (line to neutral). What will be the inductance of each phase if conductors were regularly transposed? [La =1.35 – j0.12 mH/Km; Lb=1.28mH; Lc = 1.35 + j0.12 mH; when transposed La = Lb = Lc = 1.33mH/km] Q5. Find the effective inductance per km of each phase if h = 3m, d = 1.5m, r=12.50cm. Assume transposition. [0.51mH/Km]
  2. 2. Q6. The six conductors of a double circuit 3 phase line are arranged as shown in the fig. the dia of each conductor is 2.532cm. Assume that the line is transposed. Find inductance/phase/km. [0.606mH] Q7.Dia is 5.0cm, find inductance per phase. Assume transposition. [0.92mH/km]

×