Wt5912 unit1 week2

893 views

Published on

Lecture Week 2

Published in: Education
0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total views
893
On SlideShare
0
From Embeds
0
Number of Embeds
2
Actions
Shares
0
Downloads
40
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

Wt5912 unit1 week2

  1. 1. WT5912TECHNOLOGY EDUCATION & WORKSHOP PRACTICE 2: MATERIALS AND CONSTRUCTIONUnit 1 – Week 2 Construction Studies/Machine Anatomy/Project 1<br />Department of Design & Manufacturing Technology<br />Lecturer/Teacher: Mr. Joseph Lyster <br />Academic Year 2011: Spring Semester<br />Technical Support: Mr. Joe Murray & Mr. Richie Hennessy <br />Notes prepared by: Mr. Joseph Lyster<br />
  2. 2. WT5912<br />Construction Studies<br />Department of Design & Manufacturing Technology<br />
  3. 3. WT5912<br />Construction Studies:<br />Numbers taking the subject…<br />(Chief Examiners Report, 2009)<br />Department of Design & Manufacturing Technology<br />
  4. 4. WT5912<br />Construction Studies:<br />Total Cohort…<br />(Chief Examiners Report, 2009)<br />Department of Design & Manufacturing Technology<br />
  5. 5. WT5912<br />Construction Studies:<br />Ordinary/Higher Level Grade Distribution…<br />(Chief Examiners Report, 2009)<br />Department of Design & Manufacturing Technology<br />
  6. 6. WT5912<br />Construction Studies:<br />Project Selection…<br />(Chief Examiners Report, 2009)<br />Department of Design & Manufacturing Technology<br />
  7. 7. WT5912<br />Construction Studies:<br />Submission of Portfolios…<br />(Chief Examiners Report, 2009)<br />Department of Design & Manufacturing Technology<br />
  8. 8. WT5912<br />Construction Studies:<br />Gender Balance…<br />(Chief Examiners Report, 2009)<br />Department of Design & Manufacturing Technology<br />
  9. 9. WT5912<br />Construction Studies:<br />Chief Examiners Report 2009…<br />It is recommended that teachers: <br />• ensure that a balanced time provision is made available for all three components of the course – practical, written, and coursework <br />• encourage students to plan their work in advance and to devise a coursework management log or Gantt chart to help them set targets and thus help optimise the use of time spend on coursework <br />• encourage students to explore a wide variety of topics and themes before deciding on a particular coursework type <br />• direct students’ attention to the rich architectural heritage of this country and encourage them to explore the architectural and craft heritage of their local area so as to provide stimulus for a diverse range of coursework <br />• encourage students to develop the range of investigative and research skills <br />• advise students to develop the portfolio in tandem with the development of the artefact <br />Department of Design & Manufacturing Technology<br />
  10. 10. WT5912<br />Construction Studies:<br />Chief Examiners Report 2009…<br />• encourage students to keep a dedicated sketchpad to help develop sketching skills <br />• advise students to record in the portfolio the sources of all information, especially information sourced from the Internet <br />• display the relevant posters relating to coursework in the Construction Studies room and bring to the attention of all candidates the regulations contained in the relevant circulars and posters <br />• ensure that all students complete and sign the necessary documentation prior to leaving school <br />• display coursework in an attractive manner. Coursework work should be arranged in ascending numerical order and no other coursework should be displayed in the Centre. <br />• encourage students to keep a sketchpad from the beginning of the course and to continually make sketches of buildings and architectural detailing as a method of recording and of practising sketching techniques over the duration of the course <br />• not permit candidates remove the coursework from the school to facilitate additional work - as the teacher cannot then authenticate coursework completed in an out-of-school setting. <br />Department of Design & Manufacturing Technology<br />
  11. 11. WT5912<br />Construction Studies:<br />General Themes…<br />Four main themes prevalent in most technology education programmes:<br />Technological Knowledge<br />Technological Skills<br />Technological Capability<br />...and most recently - Technological Concepts<br />Department of Design & Manufacturing Technology<br />
  12. 12. WT5912<br />Construction Studies:<br />Traditional Model of Irish Technology Education…<br />(DES, 2000)<br />Department of Design & Manufacturing Technology<br />
  13. 13. WT5912<br />Construction Studies:<br />New Model for Irish Technology Education…<br />This model is applied directly in leaving certificate Technology <br />(NCCA, 2008)<br />Department of Design & Manufacturing Technology<br />
  14. 14. WT5912<br />The proposed model for Architectural Technology…<br />Construction Studies ‘Next Top Model’…???<br />(NCCA, 2006)<br />Department of Design & Manufacturing Technology<br />
  15. 15. WT5912<br />Architectural Technology…<br />(T4, 2008)<br />Department of Design & Manufacturing Technology<br />
  16. 16. WT5912<br />The role of design in core elements of Architectural Technology…<br />(T4, 2008)<br />Department of Design & Manufacturing Technology<br />
  17. 17. WT5912<br />Building Heritage/Craft Heritage…<br />(T4, 2008)<br />Department of Design & Manufacturing Technology<br />
  18. 18. WT5912<br />Services & Environmental Technology…<br />Department of Design & Manufacturing Technology<br />
  19. 19. WT5912<br />Processing of Materials…<br />(T4, 2008)<br />Department of Design & Manufacturing Technology<br />
  20. 20. WT5912<br />Environment…<br />(T4, 2008)<br />Department of Design & Manufacturing Technology<br />
  21. 21. WT5912<br />Construction Studies:<br />Coursework & Projects…<br />(T4, 2008)<br />Department of Design & Manufacturing Technology<br />
  22. 22. WT5912<br />Architectural Technology:<br />Coursework & Projects…<br />(T4, 2008)<br />Department of Design & Manufacturing Technology<br />
  23. 23. WT5912<br />Professional Development Needs for Subject Areas…<br />(T4, 2008)<br />Department of Design & Manufacturing Technology<br />
  24. 24. WT5912<br />Project 1: Equipment Box<br />Department of Design & Manufacturing Technology<br />
  25. 25. Equipment Box<br />WT5912<br />The project is designed to engage you in a number of wood processes for wood processing safety and best practice.<br />Thus far the majority of raw material has been processed using the surface planer, thicknesser and rip saw<br />The resulting components will be further processed in line with project construction<br />The project aims to develop the following skills:<br />Ability to process raw material<br />Ability to record processes<br />Ability to develop risk perception through hazard identification and risk assessment procedures, according to legislation.<br />Ability to execute a series of jointing, shaping and general woodworking techniques using the hand, power and machine tools/techniques.<br />Ability to effectively plan project regarding realistic process factors and time constraints<br />Department of Design & Manufacturing Technology<br />
  26. 26. Equipment Box<br />WT5912<br />Ability to interpret inbuilt design factors, for example effective design parametres for holding equipment specific to teachers of Construction Studies.<br />Ability to engage wood a range of wood based materials – red deal, southern yellow pine, MDF and 3mm and 6mm birch ply.<br />Ability to size and locate fixtures and fittings such as hinges, clips, locks etc…<br />Ability to execute assembly process through gluing, clamping, and fixing, all in the form of sub-assemblies and one final main assembly.<br />Ability to apply appropriate finishing techniques including sanding and varnishing.<br />Ability to evaluate the design and re-design.<br />Ability to record information in a logical sequence as outlined by the Construction Studies project Guidelines. <br />Department of Design & Manufacturing Technology<br />
  27. 27. WT5912<br />Stage 1 – Main Box<br />Department of Design & Manufacturing Technology<br />
  28. 28. WT5912<br />Stage 1 – Main Box<br />Department of Design & Manufacturing Technology<br />
  29. 29. WT5912<br />Stage 1 – Main Box<br />Dovetail Spec. (Female) – Front/Back Rail<br />Department of Design & Manufacturing Technology<br />
  30. 30. WT5912<br />Stage 1 – Main Box<br />Dovetail Spec. (Male) – Side Rail 1&2<br />Department of Design & Manufacturing Technology<br />
  31. 31. WT5912<br />Stage 1 – Main Box<br />Stopped Rebate –Front/Back Rail<br />Department of Design & Manufacturing Technology<br />
  32. 32. WT5912<br />Stage 1 – Main Box<br />Through Rebate – Side Rail 1&2<br />Department of Design & Manufacturing Technology<br />
  33. 33. WT5912<br />Stage 1 – Main Box<br />Back Rail - 6˚ Top Edge Rip (Inward)<br />Department of Design & Manufacturing Technology<br />
  34. 34. WT5912<br />Stage 2 – Main Box<br />Processing Box Components<br />Department of Design & Manufacturing Technology<br />
  35. 35. WT5912<br />Stage 2 – Main Box<br />Front Rail - 6˚ Rip @ 100mm <br />Department of Design & Manufacturing Technology<br />
  36. 36. WT5912<br />Stage 2 – Main Box<br />Side Rail 1 – 6˚ Bandsaw Slop Cut<br />Department of Design & Manufacturing Technology<br />
  37. 37. WT5912<br />Stage 2 – Main Box<br />Side Rail 2 – 6˚ Bandsaw Slop Cut<br />Department of Design & Manufacturing Technology<br />
  38. 38. WT5912<br />Stage 3 – Main Box<br />Assembly1 – Main box with base panel<br />Department of Design & Manufacturing Technology<br />
  39. 39. WT5912<br />Stage 3 – Main Box<br />6mm MDF Base panel – Panel Saw <br />Department of Design & Manufacturing Technology<br />
  40. 40. WT5912<br />Stage 3 – Main Box<br />Assembly 1 – Top Panel<br />Department of Design & Manufacturing Technology<br />
  41. 41. WT5912<br />Stage 3 – Main Box<br />6mm MDF Top Support Panel<br />Department of Design & Manufacturing Technology<br />
  42. 42. WT5912<br />Stage 3 – Main Box<br />3mm Birch Ply Top Panel<br />Department of Design & Manufacturing Technology<br />
  43. 43. WT5912<br />Stage 4 – Splitting Main Box<br />Department of Design & Manufacturing Technology<br />
  44. 44. WT5912<br />Stage 4 – Splitting Main Box<br />Department of Design & Manufacturing Technology<br />
  45. 45. WT5912<br />Stage 4 – Splitting Main Box<br />Bottom Box – Spindle Moulder Split<br />Department of Design & Manufacturing Technology<br />
  46. 46. WT5912<br />Stage 4 – Splitting Main Box<br />Department of Design & Manufacturing Technology<br />
  47. 47. WT5912<br />Stage 4 – Splitting Main Box<br />Top Box – Spindle Moulder Split<br />Department of Design & Manufacturing Technology<br />
  48. 48. WT5912<br />Stage 4 – Main Box<br />Assembly 2<br />Department of Design & Manufacturing Technology<br />
  49. 49. WT5912<br />Stage 4 – Main Box<br />Department of Design & Manufacturing Technology<br />
  50. 50. WT5912<br />Stage 4 – Main Box<br />- Hinging Top/Bottom<br />- Hinging Paper Tray<br />Department of Design & Manufacturing Technology<br />
  51. 51. WT5912<br />Stage 4 – Main Box<br />Paper Tray<br />Department of Design & Manufacturing Technology<br />
  52. 52. WT5912<br />Stage 5 – Tool Tray 1<br />Department of Design & Manufacturing Technology<br />
  53. 53. WT5912<br />Stage 5 – Tool Tray 1<br />Mitre Detail<br />Department of Design & Manufacturing Technology<br />
  54. 54. WT5912<br />Stage 5 – Tool Tray 1<br />Mitre Detail<br />Department of Design & Manufacturing Technology<br />
  55. 55. WT5912<br />Stage 5 – Tool Tray 1<br />3mm Base Panel<br />Department of Design & Manufacturing Technology<br />
  56. 56. WT5912<br />Stage 5 – Tool Tray 1<br />Assembly 3 – Mitre/Spline<br />Department of Design & Manufacturing Technology<br />
  57. 57. WT5912<br />Stage 5 – Tool Tray 1<br />Department of Design & Manufacturing Technology<br />
  58. 58. WT5912<br />Stage 5 – Tool Tray 1<br />Department of Design & Manufacturing Technology<br />
  59. 59. WT5912<br />Stage 5 – Tool Tray 1<br />Department of Design & Manufacturing Technology<br />
  60. 60. WT5912<br />Stage 5 – Tool Tray 1<br />Department of Design & Manufacturing Technology<br />
  61. 61. WT5912<br />Stage 6 – Tool Tray 2 <br />Department of Design & Manufacturing Technology<br />
  62. 62. WT5912<br />Stage 6 – Tool Tray 2<br />Front Rail - Bare Faced Housing <br />Department of Design & Manufacturing Technology<br />
  63. 63. WT5912<br />Stage 6 – Tool Tray 2<br />Back Rail – Bare Faced Housing <br />Department of Design & Manufacturing Technology<br />
  64. 64. WT5912<br />Stage 6 – Tool Tray 2<br />Side Rail 1 <br />Department of Design & Manufacturing Technology<br />
  65. 65. WT5912<br />Stage 6 – Tool Tray 2<br />Side Rail 2 <br />Department of Design & Manufacturing Technology<br />
  66. 66. WT5912<br />Stage 6 – Tool Tray 2<br />Tray Base Panel <br />Department of Design & Manufacturing Technology<br />
  67. 67. WT5912<br />Stage 6 – Tool Tray 2<br />Assembly 4 <br />Department of Design & Manufacturing Technology<br />
  68. 68. WT5912<br />Stage 6 – Tool Tray 2<br />Internal Divider 1 - Housed <br />Stage 6 – Tool Tray 2<br />Internal Divider 2 - Housed <br />Department of Design & Manufacturing Technology<br />
  69. 69. WT5912<br />Stage 6 – Tool Tray 2 <br />Department of Design & Manufacturing Technology<br />
  70. 70. WT5912<br />Stage 6 – Tool Tray 2 <br />Department of Design & Manufacturing Technology<br />
  71. 71. WT5912<br />Stage 6 – Tool Tray 2 <br />Department of Design & Manufacturing Technology<br />
  72. 72. WT5912<br />Stage 6 – Tool Tray 2 <br />Department of Design & Manufacturing Technology<br />
  73. 73. WT5912<br />Stage 6 – Tool Tray 2 <br />Department of Design & Manufacturing Technology<br />
  74. 74. WT5912<br />Stage 6 – Tool Tray 2 <br />Department of Design & Manufacturing Technology<br />
  75. 75. WT5912<br />Stage 6 – Tool Tray 2 <br />Department of Design & Manufacturing Technology<br />
  76. 76. WT5912<br />Stage 7 – Full Assembly <br />Department of Design & Manufacturing Technology<br />
  77. 77. WT5912<br />Stage 7 – Full Assembly <br />Department of Design & Manufacturing Technology<br />
  78. 78. WT5912<br />Stage 7 – Full Assembly <br />Department of Design & Manufacturing Technology<br />
  79. 79. WT5912<br />Stage 7 – Full Assembly <br />Department of Design & Manufacturing Technology<br />
  80. 80. WT5912<br />Stage 7 – Full Assembly <br />Department of Design & Manufacturing Technology<br />
  81. 81. WT5912<br />Stage 7 – Full Assembly <br />Department of Design & Manufacturing Technology<br />
  82. 82. WT5912<br />Stage 7 – Full Assembly <br />Department of Design & Manufacturing Technology<br />
  83. 83. WT5912<br />Stage 7 – Full Assembly <br />Department of Design & Manufacturing Technology<br />
  84. 84. WT5912<br />Stage 7 – Full Assembly <br />Department of Design & Manufacturing Technology<br />

×