EY4106SUBJECT PEDAGOGICS 1:TECHNOLOGY WOODUnit 9 – Week 10:Health & Safety<br />Department of Design & Manufacturing Techn...
EY4106<br />HEALTH & SAFETY<br />Department of Design & Manufacturing Technology<br />
EY4106<br />Health & Safety Management<br /><ul><li>Section 8(2)e of the 2005 Act states that it is the duty of every empl...
EY4106<br />Department of Design & Manufacturing Technology<br />
EY4106<br />Department of Design & Manufacturing Technology<br />
EY4106<br />Unsafe Workplaces<br />Can be identified by:<br /><ul><li>High accident/injury rates.
Poor machinery guarding.
Poor cleaning and housekeeping arrangements.
Limited interest of OHS by employers/management.
Lack of care/respect for safety rules.
Poor safety culture.</li></ul>Department of Design & Manufacturing Technology<br />
EY4106<br />Safe Workplaces<br />Can be identified by:<br /><ul><li>Regular inspection of workplace
Consultation between employer and employees.
Clearly defined structure of responsibilities….
Employees are trained…
Exceeds the specific requirements of the law – manages safety not for fear of being reprimanded but for the employees.</li...
EY4106<br />Safety Management<br />The Key steps of any Health & Safety Management scheme are:<br />Policy<br />Hazard ide...
EY4106<br />Required Reading<br />Department of Design & Manufacturing Technology<br />
EY4106<br />The Safety Management Process<br />Department of Design & Manufacturing Technology<br />
EY4106<br />Health & Safety Policy<br />Department of Design & Manufacturing Technology<br />
EY4106<br />Health & Safety Policy<br />Department of Design & Manufacturing Technology<br />
EY4106<br />More information can be found by<br />consulting manufacturer’s manual<br />Department of Design & Manufacturi...
EY4106<br />Health & Safety at Work Act 2005 <br />Pg. 30 of Health & Safety at Work Act 2005<br />Department of Design & ...
EY4106<br />Identify Hazards (Hazard Identification)<br />Department of Design & Manufacturing Technology<br />
EY4106<br />Department of Design & Manufacturing Technology<br />
EY4106<br />Department of Design & Manufacturing Technology<br />
EY4106<br />Department of Design & Manufacturing Technology<br />
EY4106<br />Department of Design & Manufacturing Technology<br />
EY4106<br />Department of Design & Manufacturing Technology<br />
EY4106<br />Department of Design & Manufacturing Technology<br />
EY4106<br />Department of Design & Manufacturing Technology<br />
EY4106<br />Department of Design & Manufacturing Technology<br />
EY4106<br />Department of Design & Manufacturing Technology<br />
EY4106<br />Department of Design & Manufacturing Technology<br />
EY4106<br />Department of Design & Manufacturing Technology<br />
EY4106<br />Department of Design & Manufacturing Technology<br />
EY4106<br />Common Machinery/Mechanical Hazards <br />Department of Design & Manufacturing Technology<br />
EY4106<br />Wrap Point: (Entanglement) <br />Department of Design & Manufacturing Technology<br />
EY4106<br />Shear Point and Cutting Hazards <br />Department of Design & Manufacturing Technology<br />
EY4106<br />Crush Points <br />Department of Design & Manufacturing Technology<br />
EY4106<br />Ejection Hazards <br />Department of Design & Manufacturing Technology<br />
EY4106<br />Other Hazards <br />Department of Design & Manufacturing Technology<br />
EY4106<br />Hazards <br />Department of Design & Manufacturing Technology<br />
EY4106<br />Classroom Risk Assessment:<br /><ul><li>You will need to develop a template for your lesson riskassessment.
Strategies will need to be developed to:
Reduce or eliminate risk
Demonstrate safe use of machine(s)
Teach key learning points relating to machine or process
Assess and record pupil learning and competence
Ensure adequate supervision of activities</li></ul>Department of Design & Manufacturing Technology<br />
EY4106<br />Room Layout<br />Department of Design & Manufacturing Technology<br />
EY4106<br />Room Layout<br />Department of Design & Manufacturing Technology<br />
EY4106<br />Room Layout<br />Department of Design & Manufacturing Technology<br />
EY4106<br />Room Layout<br />Department of Design & Manufacturing Technology<br />
EY4106<br />Assess Risk (Risk Assessment)<br />Department of Design & Manufacturing Technology<br />
EY4106<br />Department of Design & Manufacturing Technology<br />
EY4106<br />Risk Magnitude <br />Department of Design & Manufacturing Technology<br />
EY4106<br />Risk Assessment<br />Department of Design & Manufacturing Technology<br />
EY4106<br />Difference Between A Hazard & Risk<br /><ul><li>Hazard
means anything that can cause harm (eg chemicals,electricity, working from ladders, etc)
Risk
is the chance, high or low, that somebody will beharmed by the hazard.</li></ul>Department of Design & Manufacturing Techn...
EY4106<br />Hierarchy of Risk Control<br />Eliminate the Hazard Completely.<br />Substitute Hazard with a safer alternativ...
EY4106<br />Importance of being able to Assess Risk<br />Department of Design & Manufacturing Technology<br />
EY4106<br />Risk Assessment Considerations<br /><ul><li>Exposure to hazard
Very Infrequent (< once per annum or less)
Quite Infrequent (annually/biannually)
Frequent (quarterly/monthly)
Quite Frequent (weekly/daily)
Highly Frequent (continuous daily)</li></ul>Department of Design & Manufacturing Technology<br />
EY4106<br />Risk Assessment Considerations<br /><ul><li>Likelihood
Highly Unlikely (practically impossible)
Quite Unlikely (conceivable but very unlikely)
Likely (conceivable and could possibly happen)
Quite Likely (almost certain to happen)
Highly Likely (certain to happen)</li></ul>Department of Design & Manufacturing Technology<br />
EY4106<br />Risk Assessment Considerations<br /><ul><li>Consequences
Minor Injury/Ill Health ( minor cuts, abrasions etc.)
Injury/Ill Health (burns, sprains, minor fractures etc.)
Serious Injury/Ill Health (breaks, deafness etc.)
Major Injury/Ill Health (amputations, cancer, multiple breaks etc.)
Fatality (one or more fatalities)</li></ul>Department of Design & Manufacturing Technology<br />
EY4106<br />Factors Effecting Likelihood & Occurrence<br />Individual Factors<br /><ul><li>Knowledge
Skills
Training
Experience
Attitude
Motivation
Risk perception
Mental condition
Physical condition
Accident proneness</li></ul>Department of Design & Manufacturing Technology<br />
EY4106<br />Factors Effecting Likelihood & Occurrence<br />Task factors<br /><ul><li>Emergency arrangements
Training/ information/ instruction
Supervision
Communications
PPE
Condition of equipment/tools
Maintenance regime
Guarding/hazard controls
Workload
Patterns of work</li></ul>Department of Design & Manufacturing Technology<br />
EY4106<br />Department of Design & Manufacturing Technology<br />
EY4106<br />Factors Effecting Likelihood of Occurrence <br />Department of Design & Manufacturing Technology<br />Departme...
EY4106<br />Department of Design & Manufacturing Technology<br />
EY4106<br />Risk Magnitude Matrix <br />Department of Design & Manufacturing Technology<br />Department of Design & Manufa...
EY4106<br />Department of Design & Manufacturing Technology<br />
EY4106<br />Department of Design & Manufacturing Technology<br />
EY4106<br />Which Poses the Greatest Risk? <br />Department of Design & Manufacturing Technology<br />
EY4106<br />Department of Design & Manufacturing Technology<br />
EY4106<br />Department of Design & Manufacturing Technology<br />
Upcoming SlideShare
Loading in …5
×

Ey4106 unit9 a_week10

1,039 views

Published on

Health & Safety Week 10

Published in: Education
0 Comments
1 Like
Statistics
Notes
  • Be the first to comment

No Downloads
Views
Total views
1,039
On SlideShare
0
From Embeds
0
Number of Embeds
2
Actions
Shares
0
Downloads
39
Comments
0
Likes
1
Embeds 0
No embeds

No notes for slide

Ey4106 unit9 a_week10

  1. 1. EY4106SUBJECT PEDAGOGICS 1:TECHNOLOGY WOODUnit 9 – Week 10:Health & Safety<br />Department of Design & Manufacturing Technology<br />Lecturer/Teacher: Mr. Joseph Lyster <br />Teaching Assistant 1: Mr. Jonathan Spillane<br />Teaching Assistant 2: Mr. James O’Halloran<br />Academic Year 2011: Spring Semester<br />Technical Support: Mr. Joe Murray<br />Notes prepared by: Mr. Joseph Lyster<br />
  2. 2. EY4106<br />HEALTH & SAFETY<br />Department of Design & Manufacturing Technology<br />
  3. 3. EY4106<br />Health & Safety Management<br /><ul><li>Section 8(2)e of the 2005 Act states that it is the duty of every employer</li></ul> “to provide systems of work that are planned, organised, performed and maintained so as to be, so far as is reasonably practicable, safe and without risk to health.”<br /><ul><li>Health and safety management is a practical and systematic approach to identifying hazards and evaluating the extent of associated risk</li></ul>Department of Design & Manufacturing Technology<br />
  4. 4. EY4106<br />Department of Design & Manufacturing Technology<br />
  5. 5. EY4106<br />Department of Design & Manufacturing Technology<br />
  6. 6. EY4106<br />Unsafe Workplaces<br />Can be identified by:<br /><ul><li>High accident/injury rates.
  7. 7. Poor machinery guarding.
  8. 8. Poor cleaning and housekeeping arrangements.
  9. 9. Limited interest of OHS by employers/management.
  10. 10. Lack of care/respect for safety rules.
  11. 11. Poor safety culture.</li></ul>Department of Design & Manufacturing Technology<br />
  12. 12. EY4106<br />Safe Workplaces<br />Can be identified by:<br /><ul><li>Regular inspection of workplace
  13. 13. Consultation between employer and employees.
  14. 14. Clearly defined structure of responsibilities….
  15. 15. Employees are trained…
  16. 16. Exceeds the specific requirements of the law – manages safety not for fear of being reprimanded but for the employees.</li></ul>Department of Design & Manufacturing Technology<br />
  17. 17. EY4106<br />Safety Management<br />The Key steps of any Health & Safety Management scheme are:<br />Policy<br />Hazard identification<br />Risk Assessment<br />Control Measures.<br />Recording Findings (Safety Statement)<br />Monitoring, Review and Auditing<br />Department of Design & Manufacturing Technology<br />
  18. 18. EY4106<br />Required Reading<br />Department of Design & Manufacturing Technology<br />
  19. 19. EY4106<br />The Safety Management Process<br />Department of Design & Manufacturing Technology<br />
  20. 20. EY4106<br />Health & Safety Policy<br />Department of Design & Manufacturing Technology<br />
  21. 21. EY4106<br />Health & Safety Policy<br />Department of Design & Manufacturing Technology<br />
  22. 22. EY4106<br />More information can be found by<br />consulting manufacturer’s manual<br />Department of Design & Manufacturing Technology<br />
  23. 23. EY4106<br />Health & Safety at Work Act 2005 <br />Pg. 30 of Health & Safety at Work Act 2005<br />Department of Design & Manufacturing Technology<br />
  24. 24. EY4106<br />Identify Hazards (Hazard Identification)<br />Department of Design & Manufacturing Technology<br />
  25. 25. EY4106<br />Department of Design & Manufacturing Technology<br />
  26. 26. EY4106<br />Department of Design & Manufacturing Technology<br />
  27. 27. EY4106<br />Department of Design & Manufacturing Technology<br />
  28. 28. EY4106<br />Department of Design & Manufacturing Technology<br />
  29. 29. EY4106<br />Department of Design & Manufacturing Technology<br />
  30. 30. EY4106<br />Department of Design & Manufacturing Technology<br />
  31. 31. EY4106<br />Department of Design & Manufacturing Technology<br />
  32. 32. EY4106<br />Department of Design & Manufacturing Technology<br />
  33. 33. EY4106<br />Department of Design & Manufacturing Technology<br />
  34. 34. EY4106<br />Department of Design & Manufacturing Technology<br />
  35. 35. EY4106<br />Department of Design & Manufacturing Technology<br />
  36. 36. EY4106<br />Department of Design & Manufacturing Technology<br />
  37. 37. EY4106<br />Common Machinery/Mechanical Hazards <br />Department of Design & Manufacturing Technology<br />
  38. 38. EY4106<br />Wrap Point: (Entanglement) <br />Department of Design & Manufacturing Technology<br />
  39. 39. EY4106<br />Shear Point and Cutting Hazards <br />Department of Design & Manufacturing Technology<br />
  40. 40. EY4106<br />Crush Points <br />Department of Design & Manufacturing Technology<br />
  41. 41. EY4106<br />Ejection Hazards <br />Department of Design & Manufacturing Technology<br />
  42. 42. EY4106<br />Other Hazards <br />Department of Design & Manufacturing Technology<br />
  43. 43. EY4106<br />Hazards <br />Department of Design & Manufacturing Technology<br />
  44. 44. EY4106<br />Classroom Risk Assessment:<br /><ul><li>You will need to develop a template for your lesson riskassessment.
  45. 45. Strategies will need to be developed to:
  46. 46. Reduce or eliminate risk
  47. 47. Demonstrate safe use of machine(s)
  48. 48. Teach key learning points relating to machine or process
  49. 49. Assess and record pupil learning and competence
  50. 50. Ensure adequate supervision of activities</li></ul>Department of Design & Manufacturing Technology<br />
  51. 51. EY4106<br />Room Layout<br />Department of Design & Manufacturing Technology<br />
  52. 52. EY4106<br />Room Layout<br />Department of Design & Manufacturing Technology<br />
  53. 53. EY4106<br />Room Layout<br />Department of Design & Manufacturing Technology<br />
  54. 54. EY4106<br />Room Layout<br />Department of Design & Manufacturing Technology<br />
  55. 55. EY4106<br />Assess Risk (Risk Assessment)<br />Department of Design & Manufacturing Technology<br />
  56. 56. EY4106<br />Department of Design & Manufacturing Technology<br />
  57. 57. EY4106<br />Risk Magnitude <br />Department of Design & Manufacturing Technology<br />
  58. 58. EY4106<br />Risk Assessment<br />Department of Design & Manufacturing Technology<br />
  59. 59. EY4106<br />Difference Between A Hazard & Risk<br /><ul><li>Hazard
  60. 60. means anything that can cause harm (eg chemicals,electricity, working from ladders, etc)
  61. 61. Risk
  62. 62. is the chance, high or low, that somebody will beharmed by the hazard.</li></ul>Department of Design & Manufacturing Technology<br />
  63. 63. EY4106<br />Hierarchy of Risk Control<br />Eliminate the Hazard Completely.<br />Substitute Hazard with a safer alternative.<br />Isolate the Hazard.<br />Use engineering controls to reduce risk at the source (Guarding).<br />Provide training on how to avoid risks.<br />& if all that fails…<br />Use PPE.<br />Department of Design & Manufacturing Technology<br />
  64. 64. EY4106<br />Importance of being able to Assess Risk<br />Department of Design & Manufacturing Technology<br />
  65. 65. EY4106<br />Risk Assessment Considerations<br /><ul><li>Exposure to hazard
  66. 66. Very Infrequent (< once per annum or less)
  67. 67. Quite Infrequent (annually/biannually)
  68. 68. Frequent (quarterly/monthly)
  69. 69. Quite Frequent (weekly/daily)
  70. 70. Highly Frequent (continuous daily)</li></ul>Department of Design & Manufacturing Technology<br />
  71. 71. EY4106<br />Risk Assessment Considerations<br /><ul><li>Likelihood
  72. 72. Highly Unlikely (practically impossible)
  73. 73. Quite Unlikely (conceivable but very unlikely)
  74. 74. Likely (conceivable and could possibly happen)
  75. 75. Quite Likely (almost certain to happen)
  76. 76. Highly Likely (certain to happen)</li></ul>Department of Design & Manufacturing Technology<br />
  77. 77. EY4106<br />Risk Assessment Considerations<br /><ul><li>Consequences
  78. 78. Minor Injury/Ill Health ( minor cuts, abrasions etc.)
  79. 79. Injury/Ill Health (burns, sprains, minor fractures etc.)
  80. 80. Serious Injury/Ill Health (breaks, deafness etc.)
  81. 81. Major Injury/Ill Health (amputations, cancer, multiple breaks etc.)
  82. 82. Fatality (one or more fatalities)</li></ul>Department of Design & Manufacturing Technology<br />
  83. 83. EY4106<br />Factors Effecting Likelihood & Occurrence<br />Individual Factors<br /><ul><li>Knowledge
  84. 84. Skills
  85. 85. Training
  86. 86. Experience
  87. 87. Attitude
  88. 88. Motivation
  89. 89. Risk perception
  90. 90. Mental condition
  91. 91. Physical condition
  92. 92. Accident proneness</li></ul>Department of Design & Manufacturing Technology<br />
  93. 93. EY4106<br />Factors Effecting Likelihood & Occurrence<br />Task factors<br /><ul><li>Emergency arrangements
  94. 94. Training/ information/ instruction
  95. 95. Supervision
  96. 96. Communications
  97. 97. PPE
  98. 98. Condition of equipment/tools
  99. 99. Maintenance regime
  100. 100. Guarding/hazard controls
  101. 101. Workload
  102. 102. Patterns of work</li></ul>Department of Design & Manufacturing Technology<br />
  103. 103. EY4106<br />Department of Design & Manufacturing Technology<br />
  104. 104. EY4106<br />Factors Effecting Likelihood of Occurrence <br />Department of Design & Manufacturing Technology<br />Department of Design & Manufacturing Technology<br />
  105. 105. EY4106<br />Department of Design & Manufacturing Technology<br />
  106. 106. EY4106<br />Risk Magnitude Matrix <br />Department of Design & Manufacturing Technology<br />Department of Design & Manufacturing Technology<br />
  107. 107. EY4106<br />Department of Design & Manufacturing Technology<br />
  108. 108. EY4106<br />Department of Design & Manufacturing Technology<br />
  109. 109. EY4106<br />Which Poses the Greatest Risk? <br />Department of Design & Manufacturing Technology<br />
  110. 110. EY4106<br />Department of Design & Manufacturing Technology<br />
  111. 111. EY4106<br />Department of Design & Manufacturing Technology<br />
  112. 112. EY4106<br />Risk Magnitude Matrix <br />Department of Design & Manufacturing Technology<br />
  113. 113. EY4106<br />Department of Design & Manufacturing Technology<br />
  114. 114. EY4106<br />Department of Design & Manufacturing Technology<br />
  115. 115. EY4106<br />Department of Design & Manufacturing Technology<br />
  116. 116. EY4106<br />Department of Design & Manufacturing Technology<br />
  117. 117. EY4106<br />Department of Design & Manufacturing Technology<br />
  118. 118. EY4106<br />Risk Assessment Template<br />Department of Design & Manufacturing Technology<br />
  119. 119. EY4106<br />Department of Design & Manufacturing Technology<br />
  120. 120. EY4106<br />Department of Design & Manufacturing Technology<br />
  121. 121. EY4106<br />Department of Design & Manufacturing Technology<br />
  122. 122. EY4106<br />Department of Design & Manufacturing Technology<br />
  123. 123. EY4106<br />Department of Design & Manufacturing Technology<br />
  124. 124. EY4106<br />Department of Design & Manufacturing Technology<br />
  125. 125. EY4106<br />Department of Design & Manufacturing Technology<br />
  126. 126. EY4106<br />Department of Design & Manufacturing Technology<br />
  127. 127. EY4106<br />Department of Design & Manufacturing Technology<br />
  128. 128. EY4106<br />Department of Design & Manufacturing Technology<br />
  129. 129. EY4106<br />Department of Design & Manufacturing Technology<br />
  130. 130. EY4106<br />Department of Design & Manufacturing Technology<br />
  131. 131. EY4106<br />Department of Design & Manufacturing Technology<br />
  132. 132. EY4106<br />Department of Design & Manufacturing Technology<br />
  133. 133. EY4106<br />Department of Design & Manufacturing Technology<br />
  134. 134. EY4106<br />Department of Design & Manufacturing Technology<br />
  135. 135. EY4106<br />Department of Design & Manufacturing Technology<br />
  136. 136. EY4106<br />Department of Design & Manufacturing Technology<br />
  137. 137. EY4106<br />CLASSROOM MANAGEMENT: Health & Safety…<br />Department of Design & Manufacturing Technology<br />
  138. 138. EY4106<br />Supervision & Access<br /><ul><li>Students should only work in a high risk area when it is fully under the control of a person competent to work in and supervise that area.
  139. 139. Close monitoring of students using machinery.
  140. 140. Students must not be permitted to use equipment while unsupervised.
  141. 141. It is the responsibility of the schools to ensure that the machines are not accessible to unauthorised persons
  142. 142. Cleaners
  143. 143. Visitors
  144. 144. Unsupervised students.</li></ul>Department of Design & Manufacturing Technology<br />
  145. 145. EY4106<br />Supervision & Access<br />Department of Design & Manufacturing Technology<br />
  146. 146. EY4106<br />Supervision & Access<br />Department of Design & Manufacturing Technology<br />
  147. 147. EY4106<br />Exclusion Zones<br /><ul><li>An assessment of each workshop should be carried out in order to determine the safe operational area around each machine.
  148. 148. Hard wearing and clearly visible markings should be set down on the floor to indicate these safe operation areas.
  149. 149. If necessary, machines should be moved to accommodate this safe operational area.</li></ul>Department of Design & Manufacturing Technology<br />
  150. 150. EY4106<br />Emergency Isolators and Emergency Stops <br />Department of Design & Manufacturing Technology<br />
  151. 151. EY4106<br />Start/Stop<br /><ul><li>Are there appropriate start / stop controls ?
  152. 152. Location
  153. 153. Colour
  154. 154. Flush mounted
  155. 155. Mushroom head
  156. 156. Turn release
  157. 157. Key release</li></ul>Department of Design & Manufacturing Technology<br />
  158. 158. EY4106<br />Start/Stop<br /> Stop control must have priority over the Start control.<br /> Start Control<br /><ul><li>Flush
  159. 159. Recessed</li></ul>Stop Control<br /><ul><li>Mushroom Head
  160. 160. Push Bar</li></ul>Department of Design & Manufacturing Technology<br />
  161. 161. EY4106<br />Emergency Stop<br />Some machines may have two stopping devices.<br />Hand Operated<br />Foot/Knee Operated<br />Department of Design & Manufacturing Technology<br />
  162. 162. EY4106<br />Material Preparation <br />Department of Design & Manufacturing Technology<br />
  163. 163. EY4106<br />Guarding<br />Machine guards must:<br /><ul><li>Be of robust construction.
  164. 164. Not give rise to any additional hazard.
  165. 165. Not be easily removed or rendered inoperative.</li></ul> (Removed with the use of a tool)<br /><ul><li>Be situated a sufficient distance from the danger zone.
  166. 166. Not restrict more than necessary the view of the operating cycle of the equipment</li></ul>Department of Design & Manufacturing Technology<br />
  167. 167. EY4106<br />Lighting<br />Department of Design & Manufacturing Technology<br />
  168. 168. EY4106<br />Push Sticks <br />Department of Design & Manufacturing Technology<br />
  169. 169. EY4106<br />Maintenance of Machinery <br />Department of Design & Manufacturing Technology<br />
  170. 170. EY4106<br />Preventative Maintenance <br />Department of Design & Manufacturing Technology<br />
  171. 171. EY4106<br />Maintenance Records <br />Department of Design & Manufacturing Technology<br />
  172. 172. EY4106<br />Inspection of Machinery <br />Department of Design & Manufacturing Technology<br />
  173. 173. EY4106<br />Inadvertent Starting <br />Department of Design & Manufacturing Technology<br />
  174. 174. EY4106<br />Machinery Rundown Time <br />Department of Design & Manufacturing Technology<br />
  175. 175. EY4106<br />CE Mark<br />The CE Marking is not a mark indicating conformity to a standard but rather a mark indicating conformity to the legal requirements of EU Directives. <br />Department of Design & Manufacturing Technology<br />
  176. 176. EY4106<br />CE Mark<br /><ul><li>CE Marking is the symbol as shown on the top of this page.
  177. 177. The letters "CE" are the abbreviation of French phrase "Conformité Européene" which literally means "European Conformity".
  178. 178. The term initially used was "EC Mark" and it was officially replaced by "CE Marking" in the Directive 93/68/EEC in 1993.</li></ul>Department of Design & Manufacturing Technology<br />
  179. 179. EY4106<br />CE Mark<br /><ul><li>Machinery must bear the “CE” mark in order to be deemed in compliance with these regulations.
  180. 180. Must not add to machinery – must be there… criminal offence to try to add it.
  181. 181. Also an offence to reduce the visibility of the “CE” Marking on a machine.</li></ul>Department of Design & Manufacturing Technology<br />
  182. 182. EY4106<br />CE Mark<br /> The existence of the “CE” marking on a piece of machinery should indicate that its manufacturer has met all relevant standards and requirements.<br />Department of Design & Manufacturing Technology<br />
  183. 183. EY4106<br />CE Mark<br /> Never assume that machinery is safe just because it has a “CE” marking<br />Department of Design & Manufacturing Technology<br />
  184. 184. EY4106<br />Emergency/<br />Permission<br />Mandatory/Action<br />Warning/Caution-Danger<br />Regulatory/<br />Prohibited<br />Department of Design & Manufacturing Technology<br />
  185. 185. EY4106<br />Department of Design & Manufacturing Technology<br />

×