Machines and Technology of Woodworking


Published on

  • Be the first to comment

  • Be the first to like this

No Downloads
Total views
On SlideShare
From Embeds
Number of Embeds
Embeds 0
No embeds

No notes for slide

Machines and Technology of Woodworking

  1. 1. Department«Machines and Technology ofWoodworking»Staff members:Ganapolskiy Sergey Grigoryevich, Head of the Department, PhD,Associate ProfessorAgapov Alexander Ivanovich, Doctor, ProfessorRublyova Olga Anatolyevna, PhD, Associate ProfessorVlasov Artyom Vladimirovich, Senior LecturerPh.: (8332) 53-23-94
  2. 2. 1.1 Project nameOptimization of circular saws construction. Investigation of circularsaw blades operating modes and constructions influence on their dynamiccharacteristics.1.2 The essence of the projectDetermination of the optimal construction and improvement ofdynamic stability of circular saw blades to minimize the thickness of the cut,reduce energy costs, improve productivity and quality of wood cutting.
  3. 3. 1.3 Main publications1. Vlasov А.V. Methodology of circular saws speed selection. VII InternationalEurasian Symposium "Wood: technology, equipment, management of the XXIcentury» // – Yekaterinburg, 2012.2. Vlasov А.V. Circular saw speed and thickness influence on its natural frequency// Woodworking: technology, equipment, management of the XXI century.Proceedings of the V International Eurasian Symposium / Under the editorship ofV.G. Novosyolova – Yekaterinburg, 2010. – pp. 177-183. ISBN 978-5-94984-314-7.3. Vlasov А.V. /Theoretical analysis of the influence of parameters of externalradial slots on the static stability and the natural frequency of the disc circularsaw/А.V. Vlasov, А.I. Agapov// All-Russian Scientific Conference "Society,Science, Innovation": Kirov, 2010. Volume1, pp. 224-227.4. Vlasov А.V. / Investigation of the influence of thickness and cutting speed on thestatic stability of the circular saw blade [Electronic resource] / А.V. Vlasov, А.I.Agapov // Society, science, innovation: Annual Open All-Russian Scientific andTechnical Conference, 2011.: executive editor S.G. Litvinets. – Kirov, 2011. – 1CD-ROM.
  4. 4. 1.4 AchievementsMathematical model reflecting the connectivity of structuresand geometric parameters of saws with stability factors wasdeveloped.Dependence of the saw blade on its geometrical parametersrigidity was received.Thermal fields in the disk saws were simulated.Saw blade natural frequencies and critical speed wereidentified.Saw blade tension was simulated.Quantity, area location, shape and size of the compensationslots were defined.Optimum number of teeth was determined.Most effective cutting conditions were determined (saw speedand feed rate).An experimental setup for dynamic characteristics of circularsaw blades investigation was constructed and installed.
  5. 5. 1.5 Laboratory facilities- Experimental setup based on the circular saw CA-2A.- Frequency converter Mitsubishi Electric FR-А740-00380-ЕС.- Tachometer АТТ-6002.- Infrared thermometer Fluke 574.- Data acquisition system NI CompactDAQ.- Inductive sensors ifm electronic with analog output.1.6 PartnersProduction and Commercial Company «Makhagoni», Yoshkar-OlaLtd. «Nizhny Novgorod metalworking plant», Nizhny Novgorod
  6. 6. 2.1 Project nameFormation of non-waste technology in the wood studs by coldmechanical pressing.а бв гFig. 1. Experimental samples of finger joints made with the method of cold mechanicalcompression :а, б - half-closed spikes, в, г – closed spikesРис. 2. Угловое соединение на открытый прямоугольный шип, полученное холоднымторцовым прессованием
  7. 7. 2.2 Project science areaEnergy-saving technologies in the woodworking.2.3 The essence of the projectManufacturing technology of finger joints using energy-efficient waste-free methodof forming the elements of finger-pressing socket connections for adhesive joints in joinery andfurniture products.Economic efficiency of the new method is caused by:- energy intensity of the process reduction;- environmental performance improving;- Cost of tools manufacturing reducing.Nodes for pressing spikes are well integrated into automated production lines.2.4 Development directionsPossible cooperation with enterprises in areas:- development of mode pressing elements finger joints in the blanks of wood;- development of construction equipment for pressing spikes;- assessment of the quality of furniture parts compounds and joinery production.
  8. 8. 2.5 Main publications, achievementsDissertation:Rublyova О.А. Formation of elements of finger joints waste-free way of mechanical pressingpieces of wood, Yekaterinburg, 2011. - 224 p.Publications:1. Rublyova О.А., Kuznetsov G. P. Quality of thorns made with ​​cold pressing socket // Forestbulletin.- 2010. - vol.4. - pp. 160-163.2. Kuznetsov G. P., Rublyova О.А. System and network design approach to finger joints ofwooden parts and processes of its manufacture // // Forest bulletin. - 2010. - vol.4. - pp. 155-159.Patent:Patent № 2471614, МПК B27F1/00 Method of elements finger joints of wooden blanks forming /Rublyova О.А; the applicant and the patentee Vyatka State University – Application №2011116271Presentations at conferences:At the international, national and inter-university conferences : Yekaterinburg – 2010, 2012,Bryansk – 2011, 2012, Vologda – 2011, 2012, Syktyvkar – 2012, Kirov - 2010, 2011, 2012.
  9. 9. 2.6 Laboratory facilitiesMachinery equipment in the department laboratory "tools andinstruments".2.7 PartnersFurniture and wood processing plants.
  10. 10. 3.1 Project nameCutting logs optimization.3.2 Project scientific areaTimber resource-saving technologies.Theory of cutting logs and methods of maximum puts preparation.Scheme of cutting logs, lumber sawing breakup method with two bars and a pair of side boards
  11. 11. 3.3 The essence of the projectFor different cutting plans bundled solutions designed algorithmoptimization problem to determine the optimal sizes of lumber. To solve optimizationproblems by cutting logs the method of Lagrange multipliers.The project examines the main ways of cutting: breakup, lumber, sawingwith one, two and three bars, lumber, and a circular segment.3.4 Main publications1. Monograph «Optimizing lumber-way breakup cutting sawing logs with two boards».Kirov, 08.07.2011, №333-В2011. – 77p.2. The results are used in the study of "Process optimization wood“ course.3. Method of solving optimization problems in cutting logs is described in the manual"Process optimization of woodworking." Textbook. Kirov, 2012. – 81p.
  12. 12. 3.5 Achievements1. Optimal boards size for cutting sawing logs with one and two bars weredetermined.2. Optimal timber size for cutting plans of sawing logs with three bars weredetermined.3.5 Laboratory facilitiesMachinery equipment in the department laboratory "tools and instruments“3.6 PartnersRussian sawmills. Machine tool plants for the production of equipment for thenew progressive sawmill lines.