Successfully reported this slideshow.
We use your LinkedIn profile and activity data to personalize ads and to show you more relevant ads. You can change your ad preferences anytime.

Ventac QT Acoustic Pump Jacket Installation Guide

3,313 views

Published on

Installation guide for Ventac's QT Acoustic Pump Jacket. Many houses have a pump that supplies pressured supply to bathrooms which often have excessive noise. This product will reduce the noise effectively.

Published in: Lifestyle, Business, Technology
  • Be the first to comment

  • Be the first to like this

Ventac QT Acoustic Pump Jacket Installation Guide

  1. 1. Ventac QT Acoustic Pump Jacket INSTALLATION GUIDE 7easystepstoinstallingyouracoustic pumpjacket June 2014 © Ventac 2014
  2. 2. Ventac QT Acoustic Pump Jacket Designed to combat operational noise from domestic booster pumps Easily installed this solution provides and effective way to eliminate annoying pump noise © Ventac 2014
  3. 3. What You Will Receive 2 Piece Acoustic Jacket Anti-Vibration Mat Multi-Hole Saw © Ventac 2014
  4. 4. Position the rubber vibration mat underneath the booster pump. © Ventac 2014 Step 1 – Position © Ventac 2014
  5. 5. Step 2 – Measure Carefully measure pipe distance from wall and floor. © Ventac 2014 Wall
  6. 6. Step 3 – Mark Mark distances on pump jacket for drilling, measuring to the centre of the hole location for the pipes. © Ventac 2014
  7. 7. Step 4 – Drill Carefully drill out locations for pipes using the supplied hole saw bit. © Ventac 2014
  8. 8. Step 5 – Cut Using a standard scissors, cut the jacket to allow for pipe access. © Ventac 2014
  9. 9. Step 6 – Fit Position the jacket over the pump, positioning pipes accordingly. © Ventac 2014
  10. 10. Step 7 – Assemble Fit the lid of the jacket ensuring all velcro flaps are tightly secured. © Ventac 2014
  11. 11. Important Point To Note Certain pump models require additional ventilation holes as they are air-cooled instead of water-cooled. This involves drilling extra holes as shown below that allow additional circulation. © Ventac 2014 The pump jacket has been designed for use with Grundfos, Salamander and Monsoon booster pumps Drill 2 holes here (at base where motor is) & 2 holes here (close to the top)
  12. 12. The Completed Solution © Ventac 2014
  13. 13. Congratulations! You have installed your new acoustic booster pump jacket Ventac Fitzwilliam House Blessington Wicklow 045 851500 info@ventac.com

×