Cisco discovery d homesb module 7 - v.4 in english.


Published on

  • Be the first to comment

  • Be the first to like this

No Downloads
Total views
On SlideShare
From Embeds
Number of Embeds
Embeds 0
No embeds

No notes for slide

Cisco discovery d homesb module 7 - v.4 in english.

  1. 1. Cisco Discovery - DHomesb Module 7 - V.4 in english.Q.1 Why is IEEE 802.11 wireless technology able to transmit further distances than Bluetoothtechnology? transmits at much lower frequencies has higher power output transmits at much higher frequencies uses better encryption methodsQ.2 What are three advantages of wireless over wired technology? (Choose three.) more secure longer range anytime, anywhere connectivity easy and inexpensive to install ease of using licensed air space ease of adding additional devicesQ.3 What are two benefits of wireless networking over wired networking? (Choose two.) speed security mobility reduced installation time allows users to share more resources not susceptible to interference from other devicesQ.4 A technician has been asked to provide wireless connectivity to the wired Ethernet network of abuilding. Which three factors affect the number of access points needed? (Choose three.)
  2. 2. the size of the building the number of solid interior walls in the building the presence of microwave ovens in several offices the encryption method used on the wireless network the use of both Windows and Appletalk operating systems the use of shortwave or infrared on the APQ.5 Why is security so important in wireless networks? Wireless networks are typically slower than wired networks. Televisions and other devices can interfere with wireless signals. Wireless networks broadcast data over a medium that allows easy access. Environmental factors such as thunderstorms can affect wireless networks.Q.6 What does the Wi-Fi logo indicate about a wireless device? IEEE has approved the device. The device is interoperable with all other wireless standards. The device is interoperable with other devices of the same standard that also display the Wi-Fi logo. The device is backwards compatible with all previous wireless standards.Q.7 Which statement is true concerning wireless bridges? connects two networks with a wireless link stationary device that connects to a wireless LAN allows wireless clients to connect to a wired network increases the strength of a wireless signal
  3. 3. Q.8 Which WLAN component is commonly referred to as an STA? cell antenna access point wireless bridge wireless clientQ.9 Which statement is true concerning an ad-hoc wireless network? created by connecting wireless clients in a peer-to-peer network created by connecting wireless clients to a single, centralized AP created by connecting multiple wireless basic service sets through a distribution system created by connecting wireless clients to a wired network using an ISRQ.10 Refer to the graphic. In the Wireless menu option of a Linksys integrated router, what does theNetwork Mode option Mixed mean? The router supports encryption and authentication. The router supports both wired and wireless connections. The router supports 802.11b, 802.11g, and 802.11n devices. The router supports connectivity through infrared and radio frequencies.
  4. 4. Q.11 Refer to the graphic. In the Wireless menu of a Linksys integrated router, what configurationoption allows the presence of the access point to be known to nearby clients? Network Mode Network Name (SSID) Radio Band Wide Channel Standard Channel SSID BroadcastQ.12 Which two statements about a service set identifier (SSID) are true? (Choose two.) tells a wireless device to which WLAN it belongs consists of a 32-character string and is not case sensitive responsible for determining the signal strength all wireless devices on the same WLAN must have the same SSID used to encrypt data sent across the wireless networkQ.13 Which two statements characterize wireless network security? (Choose two.)
  5. 5. Wireless networks offer the same security features as wired networks. Wardriving enhances security of wireless networks. With SSID broadcast disabled, an attacker must know the SSID to connect. Using the default IP address on an access point makes hacking easier. An attacker needs physical access to at least one network device to launch an attack.Q.14 What type of authentication does an access point use by default? Open PSK WEP EAPQ.15 Which statement is true about open authentication when it is enabled on an access point? requires no authentication uses a 64-bit encryption algorithm requires the use of an authentication server requires a mutually agreed upon passwordQ.16 What are two authentication methods that an access point could use? (Choose two.) WEP WPA EAP ASCII pre-shared keysQ.17 What is the difference between using open authentication and pre-shared keys?
  6. 6. Open authentication requires a password. Pre-shared keys do not require a password. Open authentication is used with wireless networks. Pre-shared keys are used with wired networks. Pre-shared keys require an encrypted secret word. Open authentication does not require a secretword. Pre-shared keys require a MAC address programmed into the access point. Open authenticationdoes not require this programming.Q.18 What term describes the encoding of wireless data to prevent intercepted data from being read bya hacker? address filtering authentication broadcasting encryption passphrase encodingQ.19 What access-point feature allows a network administrator to define what type of data can enterthe wireless network? encryption hacking block traffic filtering MAC address filtering authenticationQ.20 What are the two WEP key lengths? (Choose two.) 8 bit 16 bit
  7. 7. 32 bit 64 bit 128 bitQ.21 Complete the following sentence: WEP is used to ______ , and EAP is used to _____ wirelessnetworks. encrypt; authenticate users on filter traffic; select the operating frequency for identify the wireless network; compress data on create the smallest wireless network; limit the number of users on