This is the user manual of OBDLink MX. >> READ MORE: https://www.obdadvisor.com/obdlink-mx-plus-review/ Here is a detailed review of the OBDLink MX Plus scan tool based on my own experience, including: - Special functions - Compatibility - Apps and Updates - Pros and Cons Check it out to get the REVIEW and some NOTES about using this scanner.

1. OBD HOSTPOWER BT
OBD HOSTPOWER BT
'Connect'
button
Android Quick Start Guide
OBDLink MX Bluetooth
Android
Scan the QR code or visit the URL from your Android
device to download the OBDLink app:
obdlink.mx/app
Download & install OBDLink app
The DLC is usually found on the driver’s side, under
the dash.
– Can’t find your DLC? Visit dlc-locator.com
‘POWER’ LED will turn ON, and the ‘BT’ LED will
start flashing slowly.
You must complete steps 7, 8, and
9 within 2 minutes. If you need
more time, press the button again.
Attention!
The ‘BT’ LED will switch to a fast blink.
Tap ‘Scan’if OBDLink MX does not show in Avail-
able devices.
– LEDs are off? Check vehicle for blown fuses.
[instructions continue on reverse]
Plug MX Bluetooth into the diagnostic
link connector (DLC)
Turn ignition to Key On, Engine Off
position
Open‘Settings’app, and enable
‘Bluetooth’
Press the‘Connect’button on MX
Tap‘OBDLink MX’to pair the deviceTap‘Bluetooth - Pair with a device’
Wait for OBDLink MX to appear on
the‘Available devices’list1
2
3
4
6
85
7

2. Thank you for your purchase!
If you like OBDLink MX Bluetooth,
please post your review on
OBD HOSTPOWER BT
10 Launch the OBDLink app, and tap
‘Connect’
11
12
Choose‘Bluetooth’
Choose‘OBDLink MX’
– Need help? Go to obdlink.com/support
or scan the QR code
– For advanced configurations, go to obdlink.com/setup
or scan the QR code
Once the app establishes a connection with MX, the
‘BT’LED will turn on solid. Tap ‘Diagnostics’to start
a scan.
MX will now appear as ‘Paired’:
Tap‘OK’in the‘Bluetooth pairing
request’dialog9