Fitting notes for Thunderbike mufflers to fit Triumph Scrambler

1. THUNDERBIKE
SCRAMBLER
SLIP ON MUFFLERS
FITTING NOTES
Thunderbike Engineering Ltd
2/46A Muritai Street, Tahunanui, Nelson 7011, NZ
Tel: +64 (0)3 548 5787
parts@thunderbike.co.nz www.thunderbike.co.nz

2. THUNDERBIKE SCRAMBLER SLIP ON MUFFLERS FITTING NOTES
1 Remove your heat shield and standard mufflers.
2 Your new Thunderbike mufflers slip into the standard header pipes without a gasket so pull the
standard gaskets out now.
3 The muffler with the badge attached is the top muffler.
4 We recommend adding a light smear of high temperature RTV to the mating surfaces of the header
and muffler to help seal and ease removal later.
5 Use the original fittings and heat shield to re-assemble.
6 Double check your work before going for a ride!
Thunderbike Engineering Ltd
2/46A Muritai Street, Tahunanui, Nelson 7011, NZ
Tel: +64 (0)3 548 5787
parts@thunderbike.co.nz www.thunderbike.co.nz