More Related Content
Similar to How toguide remotebackup
Similar to How toguide remotebackup (20)
More from Thecus Technology Corp.,
More from Thecus Technology Corp., (15)
How toguide remotebackup
- 2. Contents
Introduction 3
Remote Target Setup 4
Full Backup 5
Custom Backup 11
iSCSI Backup 17
Remote NAS' Full Backup Target Folder 23
Remote NAS' Custom Backup Target Folder 24
- 3. Remote Backup
Introduction
Data Guard is the powerful backup solution that Thecus provides. Remote backup solutions on the market usually are expensive and requires a
complicated setup. Thecus introduces a remote backup solution that allows you to set up different backup solutions in 1 minute; and of course, it’s
free and built in to ThecusOS. In particular, a “Full backup”, “Custom backup” or “iSCSI backup”, can be set to real-time or scheduled backup accord-
ing to demand.
In this How-to, we will back up data from a N5550 (demo IP: 172.16.65.131) to N4800 (demo IP: 172.16.65.111)
Let’s get started!
2012-08 | © 2012 Thecus Technology Corp.. All Rights Reserved. 3
- 4. Remote Backup
Remote Target Setup
Step 1 - Setup Target NAS
- Open N4800 (172.16.65.111) web UI
- Click Backup > Rsync Target Server
- Select “Enable”
- Key in “Username” and “Password”
- Press “Apply”
- Setting is now finished and you may
close the browser.
2012-08 | © 2012 Thecus Technology Corp.. All Rights Reserved. 4
- 5. Remote Backup
Full Backup
Step 2 - Setup source NAS
- Open N5550 (172.16.65.131) web UI
steps below are all in N5550 UI
- Click Backup > Data Guard, and you
will see the work area right behind, all
Data Guard backup tasks will be listed
here.
- Click “Add” to add backup task.
2012-08 | © 2012 Thecus Technology Corp.. All Rights Reserved. 5
- 6. Remote Backup
Full Backup
Step 3 - Remote backup’s full backup
- After clicking “Add”, the Data Backup
Wizard will popup.
- Choose “Remote Backup”
2012-08 | © 2012 Thecus Technology Corp.. All Rights Reserved. 6
- 7. Remote Backup
Full Backup
Step 4 -Full backup setup
- Choose “Full Backup”
2012-08 | © 2012 Thecus Technology Corp.. All Rights Reserved. 7
- 8. Remote Backup
Full Backup
Step 5 - Connect to target NAS
- Key in IP address to Remote Target
column and keep “873” as port number.
- Key in the Account and Password that
you set up for the N4800.
- You will find the button below still
shows “Previous”. You have to press the
“Connection Test” first, then the “Next”
button will show up.
- Press “Next” button.
2012-08 | © 2012 Thecus Technology Corp.. All Rights Reserved. 8
- 9. Remote Backup
Full Backup
Step 6 - Full backup setup
- The page provides several functions
that you can choose on demand.
- Then press “Finish” button
2012-08 | © 2012 Thecus Technology Corp.. All Rights Reserved. 9
- 10. Remote Backup
Full Backup
Step 7 - Task list
- Then you will see the task on the list.
2012-08 | © 2012 Thecus Technology Corp.. All Rights Reserved. 10
- 11. Remote Backup
Custom Backup
Previously, we have already setup N4800 Rsync target server, so we don’t repeat it here and will demo the custom backup.
Step 1 - Custom backup (In the solu-
tion, you can select individual fold-
ers to backup)
- Select “Custom Backup”
2012-08 | © 2012 Thecus Technology Corp.. All Rights Reserved. 11
- 12. Remote Backup
Custom Backup
Step 2- Connect target NAS
- Key in Remote Target’s IP address, Ac-
count and Password.
- Input “Target Folder” name. Please
note that the letter case are consistent.
- Press “Connection Test”
- Press “Next”
2012-08 | © 2012 Thecus Technology Corp.. All Rights Reserved. 12
- 13. Remote Backup
Custom Backup
Step 3 - Select RAID volume you want
to backup.
- Double click RAID Volume’s name,
here is “RAID5” in the guide.
- Press “Previous”
2012-08 | © 2012 Thecus Technology Corp.. All Rights Reserved. 13
- 14. Remote Backup
Custom Backup
Step 4 - Select folders you want to
backup
- You may click the check box directly
or double click the folder’s name to its
sub folders. Here we check the “_NAS_
Picture_” and “_NAS_twonky_...”
- Press “Next”
2012-08 | © 2012 Thecus Technology Corp.. All Rights Reserved. 14
- 15. Remote Backup
Custom Backup
Step 5 - Custom backup setup
- You can select functions on demand.
- Press “Finish”
2012-08 | © 2012 Thecus Technology Corp.. All Rights Reserved. 15
- 16. Remote Backup
Custom Backup
Step 6 - Custom backup task list
-You will see the custom backup task
show up on the list.
2012-08 | © 2012 Thecus Technology Corp.. All Rights Reserved. 16
- 17. Remote Backup
iSCSI Backup
When the iSCSI backup task is in progress, the iSCSI Target service will be terminated.
Step 1 - iSCSI backup
- Choose “iSCSI backup”
2012-08 | © 2012 Thecus Technology Corp.. All Rights Reserved. 17
- 18. Remote Backup
iSCSI Backup
Step 2- Connect remote target
- Key in the IP address, Account and
Password.
- Input “Target Folder” name. Please
note that the letter case are consistent.
- Press “Connection Test”
- Press “Next”
2012-08 | © 2012 Thecus Technology Corp.. All Rights Reserved. 18
- 19. Remote Backup
iSCSI Backup
Step 3 - Choose the iSCSI volume you
want to backup
- Select the iSCSI Volume
- Press “Next” button.
2012-08 | © 2012 Thecus Technology Corp.. All Rights Reserved. 19
- 20. Remote Backup
iSCSI Backup
Step 3 - Choose the iSCSI volume you
want to backup
- Select the iSCSI Volume
- Press “Next” button.
2012-08 | © 2012 Thecus Technology Corp.. All Rights Reserved. 20
- 21. Remote Backup
iSCSI Backup
Step 4 - iSCSI backup setup
- Input task name
- Setup schedule
- Press “Finish” button
2012-08 | © 2012 Thecus Technology Corp.. All Rights Reserved. 21
- 22. Remote Backup
iSCSI Backup
Step 5 - iSCSI backup task list
- Now we can find the iSCSI backup task
on the list.
*When iSCSI backup is in processing,
the iSCSI LUN will disappear on the
client end in 1 minute; but if you ter-
minate the task iSCSI LUN will recover
immediately.
2012-08 | © 2012 Thecus Technology Corp.. All Rights Reserved. 22
- 23. Remote Backup
Target Folder for Remote Full Backup
After you demo the three remote backup solutions, check the file directory in Windows’ file explorer.
Regarding full backup, you will find that the directories are the same besides the “Recycle” folder.
2012-08 | © 2012 Thecus Technology Corp.. All Rights Reserved. 23
- 24. Remote Backup
Target Folder for Remote Custom Backup
Regarding custom backup, we can find custom backup task named “CustomBackup” right in the “NAS_Public” folder, and the sub folders you selected are within. On the other hand,
the iSCSI backup folder named “iSCSI_Backup” is also under the NAS_Public.
The end.
2012-08 | © 2012 Thecus Technology Corp.. All Rights Reserved. 24