Step by Step Guide forTEMS Investigation8.0.3 Installationwithout DongleTempus Telcosys
Step1: Necessary Tools that are needed with TEMS Investigation 8.0.3 (Data Collection and RouteAnalysis).Step2: Necessary ...
Step3: Install the TEMS 8.0.3 by executing TEMS_Investigation_8.0.3.Tempus Telcosys
Step4: You will note that the HASP Drivers are installed automatically. Remember there is no equipmentconnected yet.Tempus...
Step 5: Go to TEMS8_Key Folder and run the TEMS8_Activation.Tempus Telcosys
Step6: Now Replace the 5 Patched Files in Directory C:Program FilesTEMS ProductsTEMSInvestigationApplication.Tempus Telcosys
Step7: Now run the Register File Provided by David (Twice).Tempus Telcosys
Step8: Now Connect the Equipment, I have Sony Ericsson K790. If ask for Drivers then Unzip the Driversfrom the TEMS Instal...
Tempus Telcosys
Note: There will be several times that you need to give the same directory and it will keep installing thedifferent driver...
Step9: Now You need to run the Vusbbus Emulator provided by David, Click on Install, you’ll see theAladdin Driver getting ...
Step10: Go to Start  All Programs  TEMS Products  Utilities  TEMS Investigation 8.0.3 HASP HLReader. When the window p...
Step11: Open TEMS Investigation 8.0.3 Data Collection. See if your TEMS Handset is automaticallydetected or not. If not th...
Tempus Telcosys
Upcoming SlideShare
Loading in …5
×

TEMS Intallation 8.0.3 Guide

3,589 views

Published on

Step by Step Guide for TEMS Investigation
8.0.3 Installation without Dongle

Published in: Education, Business, Technology
0 Comments
5 Likes
Statistics
Notes
  • Be the first to comment

No Downloads
Views
Total views
3,589
On SlideShare
0
From Embeds
0
Number of Embeds
4
Actions
Shares
0
Downloads
0
Comments
0
Likes
5
Embeds 0
No embeds

No notes for slide

TEMS Intallation 8.0.3 Guide

  1. 1. Step by Step Guide forTEMS Investigation8.0.3 Installationwithout DongleTempus Telcosys
  2. 2. Step1: Necessary Tools that are needed with TEMS Investigation 8.0.3 (Data Collection and RouteAnalysis).Step2: Necessary files that are needed for the installation:1. TEMS 8.0.3 Installer (Step3)2. 5 Patches Files by David. (Step6)3. .reg File that is created by David from the HASP HL MAX dump. (Step7)4. Vusbbus Emulator that is again provided by David.Tempus Telcosys
  3. 3. Step3: Install the TEMS 8.0.3 by executing TEMS_Investigation_8.0.3.Tempus Telcosys
  4. 4. Step4: You will note that the HASP Drivers are installed automatically. Remember there is no equipmentconnected yet.Tempus Telcosys
  5. 5. Step 5: Go to TEMS8_Key Folder and run the TEMS8_Activation.Tempus Telcosys
  6. 6. Step6: Now Replace the 5 Patched Files in Directory C:Program FilesTEMS ProductsTEMSInvestigationApplication.Tempus Telcosys
  7. 7. Step7: Now run the Register File Provided by David (Twice).Tempus Telcosys
  8. 8. Step8: Now Connect the Equipment, I have Sony Ericsson K790. If ask for Drivers then Unzip the Driversfrom the TEMS Installer Pack. See Snapshots:Tempus Telcosys
  9. 9. Tempus Telcosys
  10. 10. Note: There will be several times that you need to give the same directory and it will keep installing thedifferent drivers of Sony Ericsson. Check if the Sony Ericsson is connected or not by going to DeviceManager.Tempus Telcosys
  11. 11. Step9: Now You need to run the Vusbbus Emulator provided by David, Click on Install, you’ll see theAladdin Driver getting Installed Automatically. Once Installed, Check the Aladdin Drivers in the DeviceManager.Tempus Telcosys
  12. 12. Step10: Go to Start  All Programs  TEMS Products  Utilities  TEMS Investigation 8.0.3 HASP HLReader. When the window pops in, click on File  Read Hasp Keys. Now you are able to run the TEMSwithout the need of dongle.Tempus Telcosys
  13. 13. Step11: Open TEMS Investigation 8.0.3 Data Collection. See if your TEMS Handset is automaticallydetected or not. If not then you don’t have to worry. You can add it manually. In my case it was detectedautomatically.To Add Manually, you need to look in the Device Manager, what are the ports Assigned to it. In my casethe two ports have been assigned Port 12 and Port 13 (See Step 8). The trick of choosing the TEMS portsis very easy. You need to click the Add Button in Equipment Configuration Window (Ctrl & Config Tab).Once done it will ask you about the ports that need to be assigned. You will see additional two ports init. Consider the series of ports, like if you have seen Port12 and Port 13 then there must be Port10 andPort 11 Present in the List of Ports. The Least Port Number is the Data Cable Port Number and the nextPort Number will automatically be the Equipment Port Number. See the Picture Above.Summary: You need to find the 4 Series of Ports, 2 Highest Number Ports are shown in Device Managerand 2 are Invisible but shown in TEMS. The least Number Port is the Data Cable Port and the next one isthe TEMS Handset Port. Now everything will be working fine, including the route Analysis, See theSnapShots below.Tempus Telcosys
  14. 14. Tempus Telcosys

×