Successfully reported this slideshow.
We use your LinkedIn profile and activity data to personalize ads and to show you more relevant ads. You can change your ad preferences anytime.

Mill 14-1-15 - Sheet - A107 - PROPOSED EAST & SOUTH ELEVATIONS

169 views

Published on

  • Be the first to comment

  • Be the first to like this

Mill 14-1-15 - Sheet - A107 - PROPOSED EAST & SOUTH ELEVATIONS

  1. 1. Ground Floor plan Existing 0 Existing First Floor Level 3620 Second Floor Level 6500 Wall Plate Level 9540 Silo Ridge Level 17520 Silo Floor Level -350 Third Floor ffl 10263 Flat Roof level 15440 External Staircase Roof Level 2 13730 K..B. C. F. G.. I. J.H.. M O PN. Proposed External Stairwell Existing Mill 17520 18993 Proposed Roof light with Lourves at the side to promote ventilation in the dance studio Proposed Double Glazed Windows Existing Masonry Wall Finish to the Exterior Proposed Triple Glazed Timber & Aluminium Windows Proposed Glazed Roof Structure Proposed Kalzip Roof to the Dance Studio Proposed Flat Roof Parapet over the External Staircase Timber Cladding to the Exterior Ground Floor plan Existing 0 Existing First Floor Level 3620 Second Floor Level 6500 Silo Ridge Level 17520 Grain Store Level 1900 Third Floor Level NC 9740 Third Floor ffl 10263 Flat Roof level 15440 External Staircase Roof Level 2 13730 1 17.16.2 3 5 6 7 8 9 10 11 1213. 14. 15.41a 2a 4b 4c 6a 8a 9a 11a 14a 14b 14c 16a 16b 16c4a Proposed External Stairwell Existing Mill Block 1 & 2 43835 Proposed Kalzip Roof to Dance Studio Proposed Double Glazing Windows Proposed Timber Frame Wall Construction Proposed Roof light with Lourves at the sides to promote ventilation in the dance studio Existing Concrete Roof Proposed Triple Glazed Timber & Aluminium Windows Original Masonry Wall Finish to the Exterior Proposed Glulam Columns & Beam Structure Proposed Flat Roof Parapet over External Staircase Proposed Terracotta Cladding to the Exterior Proposed Guarding to the Exterrnal Balcony Proposed Glazed Roof Structure to incorporate Vents for ventilation and smoke control Proposed Glazed Rooflight with lourved sides to promote natural ventilation Proposed External Staircase to be independent of the existing structure Proposed Curved Roof Proposed Glazing to dance studio Proposed treated Curved Glulam Columns to the exterior Proposed Timber decking balcony area proposed Timber cladding to the Exterior North General Specification Mill Building c1855 & c1879 Proposed Upgrade to existing External Walls: Proposed: additional dry lining board to the internal face of the external walls, consisting of 10mm layer of levelling lime plaster, 50mm Calsitherm Climate board glued to face of the lime plaster with 5mm of calsitherm adhesive mortar, a 12 mm layer of lime plaster is to be applied to the face of the calsitherm with reinforcing mesh in between the two layers of plaster, a diffusion natural paint shall then be applied to the plaster , colour as decided by client. Proposed upgrade to Existing Floor. Proposed: Existing flagstones that occur in the three bays to the South side of the mill are to be accurately surveyed, numbered and taken up from the floor carefully and stored in a safe place, the flagstone are to be reused on top of the new proposed floor. Removal of existing assumed concrete ground floor, 150mm of compacted light expanded clay aggregate to be laid on top of a geotextile breathable membrane which is to be taped and sealed up the sides of the proposed floor. 150mm Hydraulic lime screed is then to be poured on top with a 50mm hydraulic lime screed to be laid in the area where the flagstones do not occur. The Existing flagstones are to be laid on top of a hydraulic screed and are to be laid at the same level as the new proposed floor. The existing flagstones are to repointed with lime mortar. Proposed Upgrade to Existing Silo Floor Proposed: 150mm Sand Blinding is to be placed on top of existing concrete floor, 200mm Rigid PIR Insulation is then placed on top with a DPC/DPM Membrane placed on top which is to be wrapped up the side , a 100mm Concrete screed is then to be poured on top. The Concrete screed is finished with a tightly bound wearing finish. Proposed upgrade to Existing windows Proposed - Upgrading to Triple glazed argon filled Timber and aluminium window frame with 30 mm thick polyethylene foam insulation on outside Which will achieve a u-value of 0.8w/m²k. Install draught proofing strips around all windows to help prevent heat loss. Proposed Aluminium Cill to be fixed on top of existing granite cills to drain away rain water. Proposed Upgrade to Existing Silo Walls: Proposed - 150mm Rigid PIR Insulation to be packed tightly between 150 x 100 mm Steel C Channells, vertical Timber Pine Cladding to be attached back to the structure using 25 x 75mm Horizontal treated Counterbattons attached to 50 x 25mm Vertical treated Battons which are attached back to 15mm Cement Particle Board.Waterproofing membrane placed on the face of the Cement Particle Board which is then attached back to the Steel C Channels. This Structure is supported independently from the existing structure by Steel Columns which are supported individually by a Concrete Pad Foundation wherever possible to engineers specification. Proposed Upgrade to Existing First & Second Floor Mill Block: 30mm Eco Underfloor heating system panel is placed on top of the existing floor structure, 10mm Plywood distribution board is the laid on top, the boards are to be staggered and taped together, 13mm Oakwood floor is then laid as a clip system as per manufactureres specification. www.autodesk.com/revit Scale LECTURER Drawn by Date Project number Institute of Technology Carlow BSc. (Hons) in Architectural Technology Year 4 2014-2015 1 Sinéad Byrne Noel Dunne, Sujana Sudhir 16-01-15 As indicated 05/06/201516:33:33 PROPOSED EAST & SOUTH ELEVATIONS Change of use of a Protected Structure A107 1 : 100 PROPOSED SOUTH ELEVATION. 1 : 100 PROPOSED EAST ELEVATION 3D SOUTH AND EAST VIEW 1 : 1000 Keyplan Elevations Window & Door Specification Windows to be Triple Glazed Aluminium casement window with two openable bottom sections complete with a multipoint locking facility for added security. This system has a polyamide assembly, which ensures that it is thermally efficient. Window U- Value 0.8 W/M2K. Window Glazing to be 28mm double glazed; soft coat low 'E' 90% argon filled glazing units. Doors to be: East Facade : Rebated Open Out aluminium door system with anti-finger trap North Facade Rebated Open Out aluminium door system with anti-finger trap South Facade: Rebated Open Out aluminium door system with anti-finger trap

×