1. Telephone: +86 592 7797922 Fax:+86 592 6771943
Email: sales@tncarbide.com, Website: http://www.tncarbide.com
Add: No.61,Lianshang Road,Guannan Industrial District, Jimei District, Xiamen, China
Sintering HIP Furnace
Introduction
Base on years’ experience and professional in manufacturing tungsten carbide
materials, Toonney sintering furnace plant improves current machines in the market,
which helps Toonney to get the best quality products. Expect selling tungsten carbide
products, Toonney also sells sintering furnace to some customers who needs them.
Sintering furnace is a kind of stove, in which a dense polycrystalline-sintered
compact can be made under a high temperature. The shell and trolley of this series of
sintering furnace are mainly composed of the shaped steel and welding the steel plate.
Sintering furnace has two different kind of ventilator: air deflector and air blower.
Between the heating element and the blower motor, there is an electricity chain.When
the electricity chain connects to the air blower, the heating element can work. Thus we
can sure that the sintering furnace is under situation of ventilation when heating
elements, which guarantees the safety of sintering furnace.The lining and body of
sintering furnace are an entire textile fiber. The compressed parts of trolley are
composed of alumina brick. What’s more, there are a kind of temperature brick
being used to keep the working temperature and the temperature of sintering furnace
itself.Though the roller wheel rolling up and down on the guide rail, the door of
sintering furnace canbe raised or lowered. The energy of door and the trolleyare both
supplied by an electrical motor. The coordinated control is widely used on each part
of the sintering furnace.

2. Telephone: +86 592 7797922 Fax:+86 592 6771943
Email: sales@tncarbide.com, Website: http://www.tncarbide.com
Add: No.61,Lianshang Road,Guannan Industrial District, Jimei District, Xiamen, China
Sintering furnace is famous for its low energy consumption. The large-scale
sintering furnace is composed of many heating chambers with different sizes. So work
pieces with different sizes can be put into their appropriate heating chamber. Sintering
furnace with an entire textile fiber blanket module, has a good heat insulation
effectand its low energy store makes the heat loss smaller. In consequence, the energy
conservation of sintering furnace is really good.
Sintering HIP furnace has a low equipment failure rate. Because Toonney sintering
furnace apply high quality and advanced temperature controller, contact device, the
heating element and so on.The service life of sintering furnace will be long. Because
of its perfect alarm device and lock protective device, high quality completely
automatic temperature and movement control. The quality standards of speed reducer,
each kind of relay, main drive system’s electrical machineryand so on are higher than
the international requirements.
The installation of sintering furnace is really simple. The bottom of sintering
furnace and the trolley light rail are linked as a whole. It also can be used on smooth
cement floor.
Specification
Model name SIP500C
1 Effective space 500*500*1800
2 Design pressure 10MPa
3 Max.charge weight,gross 1200KG
4 Max.Temp 1600℃
5 Ultimate vacuum 0.5Pa
6 Air exhaust speed Reach 5Pa 25min
7 Wax collection rate 97.50%
8 Fast cooling time 6H
9 Temp.Uniformity ±7℃
10 Heating power 520KVA
11 Temp.Control Three/Four temperature control
12 Pressure time Below 30min
13 Carried gas Ar、N2、H2、CH4
14 Designed operation times 10000 times
15 Space requirement 8*9*4M

3. Telephone: +86 592 7797922 Fax:+86 592 6771943
Email: sales@tncarbide.com, Website: http://www.tncarbide.com
Add: No.61,Lianshang Road,Guannan Industrial District, Jimei District, Xiamen, China
Feature
Product name: Sintering furnace
Place of Origin: Fujian, China (Mainland)
Brand Name: Toonney
Model Number: 10MP sinter HIP furnace
Type: Sintering HIP furnace
Material: Temperature controller, contact device, the heating element and so on
Application: Iron and steel industry, metallurgy industry, new material industry
Size: 8*9*4M
Port: Xiamen
Payment terms: FOB Xiamen
​
Application
1. Sintering furnace can be used to sinter ceramic powder, ceramic ferrule and other
zirconia ceramics.
2. Sintering furnace can be used to sinter diamond saw blade, carbide rods, carbide
cutting tools and so on.
3. Sintering furnace can be used as heat treating of copper and steel belt.
4. Sintering furnace can be used to sinter or heat thick film circuit, thick film resistors
and electronic components steel electrode, LTCC, steel heater, solar panels and other
similar products.
In a word, sintering furnace is mainly used in iron and steel industry, metallurgy
industry, new material industry and so on.
Advantage
1. This sintering furnace can significantly reduce the sintering temperature, and the
max temperature can reach 500 ℃.
2. This sintering furnace can significantly reduce energy consumption, and energy
saving can be up to 70% to 90%.
3. The time of sintering will be shorten, about 50% of the time of common sintering
furnace.
4. This sintering furnace can significantly improve the density of material, fine grains,
and improve materials’ properties;
5. Process of sintering can be precisely controlled.
6. This series of sintering furnace has an reliable quality. Don’t worry about the safe
problem.
7. This series of sintering furnace has a long service life,low failure rate and low
maintenance cost.