The use of commercial or general
aviation aircraft entering the
Israeli airspace as mass
distractive weapons directed at
sensitive targets on the ground by
terrorists or insane individuals on
Vulnerability assessment program for incoming
Security clearance procedure for all international
Positive identification of approaching aircrafts at
specific report point before entering the Israeli
Airspace & FIR.
Positive identification of the pilot in command of
approaching aircrafts as an authorized pilot of a
security cleared airline or as a security cleared
General Aviation pilot.
Central Aviation Security Operation Center
Processing security arrival applications.
Monitoring and maintaining situational
awareness and real-time information on all
Management and coordination of aerial
aviation security incidents.
Management and administration of the
pilot's positive identification systems.
Israel Airspace Security Procedures
for General Aviation Flights
1. Obtain a Security Arrival Permit.
2. Submit an ‘Entry Code’ for the Arrival
3. Make first contact with the appropriate
ACC unit for the ‘Identification
Procedure’ as detailed in the AIP-
Applying for a Security-1Stage
1. Each private incoming flight, flown by non-Israeli
licensed pilot, shall apply for an advance over-flight
and landing permit (Security Arrival Permit).
2. The over-flight and landing application will be
submitted to the ASOC.
3. The application shall be submitted to the aviation
security interactive website.
The website will automatically verify that all of the
required information was submitted and generate an
instantaneous confirmation of successful receipt.
Stage 2 – Receipt of a ‘Pending
Security Arrival Permit’
2. The pending approval will become a
‘Final Security Arrival Permit’ only after
the pilot has submitted an ‘Entry Code’.
1. The ASOC will process the application
within the time-frames stated in AIP
Israel and will issue a ‘Pending Approval’
or a ‘Denial Notification‘ to the applicant.
Stage 3 – Submission of ‘Entry Code’
• The personal Entry Code shall be submitted to the aviation
security interactive website of the Ministry of Transport, not
later than 6 hours before departure to Tel-Aviv FIR.
• The website will automatically process code submitted and
generate an instantaneous confirmation.
‘Arrival Identification Procedure’–4Stage
• Upon approaching Tel-Aviv FIR, the pilot must establish
initial radio communication contact with the relevant
ACC unit for identification, and provide the Security
Entry Code he submitted, while awaiting clearance to
enter the FIR.
• The detailed identification procedures are stipulated in
AIP Israel ENR 1.5.
The ACC Workstation Monitoring
Display – SCS Screen
•Enables early detection of hijacked aircraft
flown by terrorist pilots
•Provides a reliable mean to clear suspicion
rise on an arriving flight by different
•The early detection of developing security
situations, minimizes the need for
scrambling of air force fighters