European Tech Serv was founded in 1995 as a company mainly trading in components for sampling systems for the Petro-chemical industry.
From 1997, ETS NV started to design and built its own sampling systems. Furthermore On-line analytical equipment came on board.
Through the years ETS became a specialist / distributor in Environmental equipment like particulate monitors for ambient and stack applications, particulate samplers for both industrial and occupational hygiene market, passive sampler for ambient studies.
Today ETS is the exclusive distributor for several environmental and process control product lines.
Besides selling high quality products, ETS provides a full range of services and products. Our goal is not to supply a piece of equipment but to solve the customer’s problem.
ETS is a VCA* certified company.
This means ETS meets all standards & regulations regarding safety & the well-being of workers.
2. Online Gas
Chromato-
graphs
Our Instruments offer various series and configurations of online GC’s for Air Quality & Industrial Site
Monitoring of organic compounds covering a wide range of application requirements.
The AMA GC 4000 series features an isothermal column oven. This analyzer series will always be the
first choice for monitoring of a single component or just a few components, which can be easily sepa-
rated in the chromatogram.
The AMA GC 5000 series has especially been developed for demanding applications and features a
temperature programmable column oven allowing for optimized peak separation. Various enrichment
modules extend the range of monitoring applications to concentration levels in the ppt range making
the GC 5000 series a perfect choice for air quality and industrial site monitoring applications.
Online GC systems of AMA Instruments have especially been developed for continuous operation under
harsh conditions, such as in monitoring stations, mobile labs or at industrial sites. The instruments are
characterized by their rugged and easily accessible design as well as their superior operational safety.
Applications: BTEX monitoring, Monitoring of Ozone Precursors (VOC’s), Monitoring of sulfur organic
compounds (Odors), Monitoring of Chlorinated Hydrocarbons, Freons and organic Solvents,...
Envirologger
Data Online
Envirologger Ltd and Air Monitors data technology partner company has developed a range of
hardware and software solutions which don’t just gather your data faster, more frequently and
at a lower cost, they also enable you to connect many different sensor types, control the remote
assets from your PC, tablet or smart phone and to send alerts when things go wrong or concentra-
tions exceed programmed limits.
Envirologger internet gateway technology combines a data logger, cellular modem, internet router
and wireless transceiver all into one small unit. It features a powerful processor which is pre-pro-
grammed with all known manufacturers protocols for almost every type of air quality monitor,
meteorological sensors , traffic cameras and noise monitors. Monitors can be connected by cable
or by wireless up to 20km away from the gateway location. Up to 256 channels of information.
The user has complete control over the data locally and can elect to have data backed up au-
tomatically on cloud servers where required, so no valuable data is ever lost. Once your data is
collected, viewing, sharing, reporting and publishing is catered for by a suite of software and web
applications. All data is in open CSV format and is UTMC compatible and data files are compatible
with Open Air for advanced analysis and visualisation.
CHROMATOGRAPHY
ONLINE
MONITORING
Copyright (c) 2017. All Rights Reserved.
ETS
www.etserv.be | info@etserv.be
Tel: +32 (0)51 81 00 10
Fax: +32 (0)51 69 78 17
European Tech Serv NV
Sparkevaardekenstraat 3
B-8600 Diksmuide
E
TS is the exclusive distributor for
several environmental and process
control product lines.
Besides selling high quality products, ETS
provides a full range of services and prod-
ucts. Our goal is not to supply a piece of
equipment but to solve the customer’s prob-
lem.
Through the years, ETS became a specialist
-distributor in environmental equipment like
particulate monitors for ambient and stack
applications, particulate samplers for both
industrial and occupational hygiene market,
passive samplers for ambient studies.
ETS is a VCA* certified company. This me-
ans ETS meets all standards & regulations
regarding safety & the well-being of wor-
kers.
Member of the EUROPA ENVIRONMENTAL
GROUP. Europa Environmental is a consor-
tium of independent companies in Europe
and Africa dedicated to the supply and
support of advanced environmental moni-
toring technology.
Our aim is to bring you the world’s best
instrumentation, spare parts, service, tech-
nical support and training.
3. 4 CINGO INC. 5CINGO INC.
AQ Mesh
Accurate
Monitoring
AQ Mesh allows air quality to be monitored in the exact locations that need to be monitored rather than
where equipment can be conveniently positioned. The small lamp post or wall mounted units “pods”
are completely wireless, using battery power and cellular communications.
AQ Mesh measures the main air polluting gases and wirelessly communicates data to a cloud network
where sophisticated data management algorithms generate highly accurate readings and monitor hard-
ware performance. User access is by an online portal, where readings can be easily viewed compared
and downloaded. The monitors are easy to install and move around, creating a network across a wide
area. AQ Mesh is ideal for identifying and monitoring ambient air quality in urban conurbations and at
“hotspots” which are often caused by pollution from traffic fumes.
The pods can also be used “on the move” on people, bicycles, or vehicles due to inbuilt GPS position-
ing. Gas, particle and combination units are available measuring NO,NO2,03 with optional CO and SO2,
plus further options for PM10 and PM2.5, particle number plus temperature, humidity and atmospheric
pressure.
Requiring almost no maintenance and with the internal battery and sensors lasting up to two years
AQ Mesh not only costs less to buy but costs much less to operate too.
Mesa Labs
air flow
calibrators
OXYSENSE
Non-Invasive
O2 Monitor
The BGI calibrators measure air flow by draw-
ing air through a venturi, or a tube with a con-
striction in the middle. As air passes
through the venturi tube, the speed increases
at the constriction point. Higher air flow pro-
duces a lower pressure. In fact, when air
flow velocity doubles through the venturi, the
pressure must drop by a factor of four. Using
this relationship, air flow can be measured
using pressure transducers before and at the
point of the constriction. The calibrator uses
these pressure measurements, ambient tem-
perature, and ambient pressure to provide an
instantaneous reading of standardized air
flow.
OxySense optical oxygen analyzers, oxygen
permeation measurement/OTR system and
oxygen measurement accessories serve the
needs of packaging labs, packaging quality
control labs, processors and packagers. The
OxySense oxygen measurement system is
unique not only for its ability to measure ox-
ygen non-invasively, but also for its ability to
measure oxygen in headspace as well as dis-
solved in liquids. It is an optical system that
can measure oxygen concentration within
packages that are transparent, semi-transpar-
ent, and translucent; and as long as the pack-
aging material can transmit blue and red light.
Coriolis µ
Microbial Air
Sampler
Corioliss μ, is a microbial air sampler for bio-contamination assessment, mainly dedicated to
research, hospitals, pharmaceutical industries, offices, houses... for the air quality control and air qual-
ity monitoring.
This device is part of microbial testing of surface and water. With the liquid output, Coriolis μ is adapted
to any scientific research in microbiology. Toxins, virus, bacteria, molds, pollens, spores are collected
and concentrated in a liquid.
In order to optimize the air sampling methods, the parameters of the Coriolis μ can be set. Through a
simple and intuitive interface, air flow rate can be adjusted from 100 to 300 liters/min, the time from 1
to 10 min and a delay before starting the run is available.
The Coriolis μ air sampler is portable and can be used either on main power supply or on battery.
Black Carbon
Aethalometer
Magee Scientific has the next generation of the worlds leading black carbon monitor. The AE33
builds on the legacy of the previous models but delivers more than just a facelift. The new unit fea-
tures a new dual-spot technology which automatically eliminates loading effects which can lead to
erroneous readings if not properly compensated.
This used to require the data to be post processed but is now taken care of by the instrument in real
time. In addition, the new unit offers a full colour touch screen display and updated electro-
nics. The AE33 also provides a seven wavelength output allowing analysis of the organic materials
associated with black carbon derived from biomass burning in addition to those from fossil com-
bustion sources.
Building on the reputation for simplicity and reliability of the AE22 series the new instrument will
provide continuity of a trusted measurement technique together with new levels of accuracy and
convenience.
ACCURATE
MONITORING
AIR FLOW
CALIBRATORS
NON-INVASIVE
O2 MONITOR
AIR SAMPLER
AETHALOMETER
4. 6 CINGO INC. 7CINGO INC.
Micro
Aethalometer
MA Series
The need to measure personal exposure to urban pollution in addition to the measurements made by
air quality networks is becoming accepted. As particulate matter pollution (PM) concentrations vary
greatly depending on proximity to traffic and the prevailing weather outdoor exposure is not always
accurately reflected by static monitoring stations. Black Carbon (BC) in particular the main source of
which mainly comes from road traffic and biomass burning can be a factor of 3 to 4 times higher for
cyclists riding in the road than for pedestrians walking at the side of the road.
Measurement method
Real-time, 5 wavelength spectrum analysis by measuring the rate of change of transmitted light due to
continuous particle deposition on filter. Measurement at 880 nm interpreted as concentration of Black
Carbon (‘BC’). Measurement at 375 nm interpreted as Ultraviolet Particulate Matter (‘UVPM’) indica-
tive of woodsmoke, tobacco, and biomass burning.
Measurement wavelengths: 880 nm, 625 nm, 528 nm, 470 nm, 375 nm
DualSpot® Loading Compensation: Real-time analysis by measuring the rate of change in absorption of
transmitted light due to the continuous collection of aerosol on filter. Simultaneous collection on two
spots in parallel at different flow rates.
Lufft
Meteorology
Sensors
Wind & Weather:
Intelligent environmental sensor technology compact “all-in-one”, individual “stand-alone” sensors
as
well as mobile solutions. The modular concept offers the ideal sensor solutions for every applica-
tion. In addition to robustness (metal housing) and the high accuracy, long-term stability, calibration
capabilities as well as a virtually maintenance-free operation from the base for the reliable use of
environmental sensors. A wide variety of digital interfaces ensures easy integration into many sys-
tems.
Traffic and Weather:
A key element for reliable travel times on land (rail and road), in the air (at airports) and for ships
(offshore). The Lufft sensors and systems support proactive decission-making for winter
maintenance services or the switching of variable message signs on motorways in real time
Ships rely on our wind sensors in the same way as airports depend on the precise measurement of
runway conditions. For this, Lufft offers both mobile and stationary sensor systems.
Ambient
CO2
Monitor
This ambient CO2 monitor is designed for outdoor and indoor monitoring of CO2 concentrations.
Based on the GSS COZIR sensor “The worlds lowest power optical CO2 sensor” the system provides
single ppm resolution and a range of 0-0.2% (2,000 ppm) and accuracy sufficient to track true am-
bient air concentrations. With performance normally associated with much more
expressive models the COZIR Ambient makes the monitoring of CO2 simple and inexpensive.
The unit connects directly to an Envirologger gateway or using wireless nodes which can
transmit over 20Km (line of sight) and up to 2 km in a built up area or indoors. Data is relayed
via cloud servers to any Internet device via a web application. Up to 100 sensor nodes per
gateway are possible allowing an entire area or large building to be monitored from one
central point.
AMBIENT
CO2
Multigas
Calibrator by
AirQrate
Duvas Fast
Response Gas
& Voc Monitor
The airQrate multi-gas calibrator provides ac-
curate concentrations of calibration gases
such as ozone, sulphur dioxide, nitrogen oxide,
nitrogen dioxide, and other gases required. The
airQrate generates gases for zero and span
calibration. An automatic multi-point calibra-
tion is available as well. Calibrations may be
performed in transfer mode or absolute mode.
The modular design enables a user-defined
calibrator configuration in relation to the
respective application.Modular components
include the dilution module and the
permeation module. Up to two permeation ov-
ens may be installed or upgraded.
DUVAS offers a new approach to multi-gas
analysis with its real time, highly flexible, cost
effective family of intelligent portable, mobile
and fixed sensors. DUVAS uses closed path
spectroscopy, capable of detecting multiple
pollutants simultaneously at ppb level. The
DUVAS DV3000 SERIES is offered in a number
of variants including a fully mobile vehicle in-
stalled monitor. DV3000 uses Differential UV
absorption spectroscopy to deliver fast, spe-
cific measurement of multiple compounds at
ppb or better detection limits.
Ideal formobile fence line studies, plume
grounding, and fugitive emissions as well as
ambient air monitoring in both fixed and port-
able formats.
MULTIGAS
CALIBRATOR
GAS & VOC
MONITOR
MICRO
AETHALOMETER
METEOROLOGY
SENSORS
5. 9CINGO INC.8 ETS
The Pastector
Smalles
Nanoparticle
Detector
The Swiss made Naneos Partector is the world’s smallest nanoparticle detector and is now being
offered in the Benelux through ETS. It is based on a novel non-contact electrical detection principle
which needs nearly no maintenance.
For nanoparticles, it measures lung deposited surface area (LDSA), a metric typically associated with
adverse effects on respiratory health. The detector is miniature and lightweight making for a truly
portable personal sampler. Measurements taken with the Partector are hassle free and result in an
ergonomic experience.
Battery life ix exceptional, start up time is minimal, and the device can be used in any orientation. In
addition to the Partector’s ease of use is its ability to provide sampling and LDSA measurements over
a wide range of particle sizes. The device is battery operated and self-contained with a removable SD
memory card, and can be charged over a standard USB cable
Magee Scien-
tific Real-Time
Total Carbon
Analyzer
The Magee Scientific Real-Time Total Carbon Analyzer, Model TCA-08, is a revolutionary scientific in-
strument that measures the Total Carbon Content (TC) of suspended aerosol particles in near-Real
Time. Total Carbon Analyzer enables continuous analysis of Total Carbon content of aerosol with two
identical flow channels for sampling and analysis.
REAL-TIME: Timebase for sampling and analysis is adjustable from 15 minutes to 24 hours.
NO GAS, NO GLASS: Ambient air is used as carrier gas at low flow rate so there is no need for gas
supplies.
Rugged elements and chambers are made of stainless steel with no glass.
OC/EC DETERMINATION: In combination with Aethalometer AE33 the TCA-08 provides a complete iden-
tification and quantitation of the carbonaceous component of ambient aerosols in near-Real Time.
PLUG & PLAY: This enables easy maintenance, operation and installation of the instrument.
Total Carbon Analyzer model TCA-08 comes in a rugged instrument package suitable for laboratory and
Air Quality monitoring applications.
NANOPARTICLE
DETECTOR
Ambient/
Fence-Line
Multi-Metals
Monitor
The Xact® 625i is designed for high time resolution multi-metals monitoring of ambient air, with de-
tection limits that rival those of laboratory analysis. The Xact® 625i comes standard with a
solid-state meteorological sensor and Cooper Environmental’s proprietary ADAPT analysis package,
making the instrument one of the most powerful air pollution source detection offerings in the indus-
try.
The system uses reel-to-reel filter tape sampling and nondestructive energy dispersive X-ray fluores-
cence (EDXRF) analysis. The air is sampled through a low volume (16.7 l/min) particulate matter
(PM) size-selective inlet and drawn through a filter tape. The resulting PM deposit is then advanced
into the analysis area where the sample is analyzed by EDXRF for selected metals while the next
sample is collected.
Applications: Fence-line monitoring, Source Apportionment, Determination of background concen-
trations, Spatial recognition of pollution sources, Temporal recognition of pollution sources, Resolve
acute, short duration events, Risk and emergency management
MULTI-METALS
MONITOR
Pegasor AQ™
Indoor
Monitoring
Pegasor AQ™
Urban
Monitoring
Measures ultrafine particles
Detects temperature, relative humidity and
CO2 concentration
Self diagnostic procedure guarantees accu-
rate continuous measurements
Fits easily to any indoor environment
Measured data can be read from the touch
screen in graphical and numerical form
Measured data can be stored on hard disk or
USB and transferred to data storage, cloud
service, or printed out as separate document
Reasonable pricing and very low cost of own-
ership
Smallest detectable particle diameter 0.01 μm
Tells particle mass concentration, particle
number concentration or particle active sur-
face area concentration
Easy installation with little installation space
Extensive self-diagnosis alarming in case of
any suspicion of data quality
Enfuser uses various data sources
Various methods for data transfer including
direct storage in the cloud
Stable with no consuming parts and easy
maintenance
INDOOR
MONITORING
OUTDOOR
MONITORING
TOTAL CARBON
ANALYZER
6. AAVOS International
Sparkevaardekenstraat 3
8600 Diksmuide
Belgium
Tel. +32 (0)51 69 78 15
Fax +32 (0)51 69 78 17
info@aavos.be
www.aavos.be
COOL RENT SERVICES
Sparkevaardekenstraat 3
8600 DIKSMUIDE
Belgium
Tel: +32 (0)51 50 21 04
Fax : +32 (0)51 50 39 35
info@coolrentservices.be
www.coolrentservices.be
AAVOS International has a wide range of on-
line process instrumentation for many appli-
cations in chemical, petrochemical, oil, gas,
food, beverage and pharmaceutical industry.
COOL RENT SERVICES
We are specialized in refrigeration te-
chnology rentals. We offer you the
solution for your cooling problem.
CRS