Successfully reported this slideshow.
We use your LinkedIn profile and activity data to personalize ads and to show you more relevant ads. You can change your ad preferences anytime.

QuickTest 100 Product Presentation


Published on

  • Be the first to comment

  • Be the first to like this

QuickTest 100 Product Presentation

  1. 1. QuickTest 100 ADSL2+ Tester
  2. 2. <ul><li>QuickTest 100 </li></ul><ul><li>A cost effective, feature rich, yet simple to use ADSL2+ Tester </li></ul>
  3. 3. Key Features <ul><li>Fast and Simple ADSL2+ Installation and Maintenance Tester </li></ul><ul><li>Simple Pass / Fail Front Panel LEDs </li></ul><ul><li>Comprehensive yet simple Web Interface for Troubleshooting </li></ul><ul><li>Rapid Switch On and Test </li></ul><ul><li>Automatic QuickTest Script at start up </li></ul><ul><li>Supervisor Pass / Fail Thresholds </li></ul><ul><li>Up to eight Service Connection Tests </li></ul><ul><li>IP Layer Tests - PING, FTP, HTTP and DNS </li></ul>
  4. 4. Simplicity <ul><li>LEDs to indicate to indicate service issues from Line Voltage through to High Layer HTTP tests. </li></ul><ul><li>Supports ADSL, ADSL2, ADSL2+ </li></ul><ul><li>Supports PPPoA, PPPoE, IPoA, MER </li></ul><ul><li>Simple and Rapid testing at the MDF, Cabinet and Customer Premise </li></ul>
  5. 5. Two Product Versions ADSL2+ Service Measurement Version High Layer Test Version
  6. 6. Front Panel Service Connection LEDs ( Common to both product versions) Indicates problems with PPP login and obtaining an IP address Indicates problems with ADSL2+ Layer. Such as poor rate, excessive errors. Indicates problems with missing Line voltage or incorrect polarity.
  7. 7. Front Panel ADSL2+ Service Measurement LEDs Identifies if there is a poor Line Rate. This can be due to wrong DSLAM configuration, poor wiring or excessive line attenuation. Identifies if there is a poor Noise Margin. This may be due to excessive line attenuation, poor connections, or adjacent cables/equipment causing interference Identifies if there is excessive Line Attenuation. Check for poor connections. Check that the line length is not to far from the exchange.
  8. 8. ADSL Service Measurements <ul><li>Line Rate </li></ul><ul><ul><li>Dedicated Front Panel LED to indicate if either Upstream or Downstream Line rate below required threshold </li></ul></ul><ul><li>Noise Margin </li></ul><ul><ul><li>Dedicated Front Panel LED to indicate if either Upstream or Downstream Noise Margin below required threshold </li></ul></ul><ul><li>Line Attenuation </li></ul><ul><ul><li>Dedicated Front Panel LED to indicate if either Upstream or Downstream Line Attenuation below required threshold </li></ul></ul>
  9. 9. Front Panel High Layer Service Test LEDs Indicates Problems such as poor data rate. Indicates problems such as unable to reach the default gateway, DNS server or specified endpoint. Indicates problems with HTTP Test such as unable to reach server, poor performance
  10. 10. High Layer Service Tests <ul><li>IP Ping Test </li></ul><ul><ul><li>Dedicated Front Panel LED </li></ul></ul><ul><ul><li>Tests to the Default Gateway, DNS Servers, the Specified end point </li></ul></ul><ul><ul><li>Identifies problems with incorrect IP Address assignment </li></ul></ul><ul><ul><li>Identifies problems with invalid default gateway or DNS servers </li></ul></ul><ul><li>HTTP Test </li></ul><ul><ul><li>Dedicated Front Panel LED </li></ul></ul><ul><ul><li>Identifies problems with accessing the target HTTP Server </li></ul></ul><ul><ul><li>Identifies problems with poor download rates </li></ul></ul><ul><li>FTP Test </li></ul><ul><ul><li>Dedicated Front Panel LED </li></ul></ul><ul><ul><li>Identifies problems with accessing the target FTP Server </li></ul></ul><ul><ul><li>Identifies problems with poor download rates </li></ul></ul>
  11. 11. Web Interface <ul><li>Designed to target Installation and Maintenance Test Needs </li></ul><ul><li>Comprehensive but simple to use Test Suite makes the QuickTest 100 a capable Field Tester. </li></ul>
  12. 12. Web Interface Retains simple Pass / Fail Concept as on the product Front Panel
  13. 13. Web Interface When a fault is identified the failing parameter is also highlighted in Red.
  14. 14. Web Interface Test Status Provided
  15. 15. Web Interface All Backed up with Comprehensive Statistics
  16. 16. Quick Test Script <ul><li>Runs at start up </li></ul><ul><li>Activates DSL, ATM, PPP and IP layers. </li></ul><ul><li>DNS Test </li></ul><ul><li>Ping Test </li></ul><ul><li>FTP Test </li></ul><ul><li>HTTP Test </li></ul><ul><li>Included in both product versions </li></ul>
  17. 17. Supervisor and Operator Modes <ul><li>Supervisor is able to Create, Save and Copy Service Profiles </li></ul><ul><li>Supervisor is able to Modify all Setup Parameters </li></ul><ul><li>Supervisor is able to Configure Pass / Fail Thresholds for each Test </li></ul><ul><li>Operator Mode is locked down and has no access to the above options </li></ul><ul><li>Additional Modes such as Field Technician can be supported </li></ul>
  18. 18. Supervisor Screen Setup Menu Extended Admin Options
  19. 19. Operator Screen No Setup Menu Reduced Admin Menu
  20. 20. Configurable Pass / Fail Thresholds <ul><li>For each Test the supervisor can set Pass / Fail thresholds - or simply use the factory supplied values. </li></ul><ul><li>Helps to define what is an acceptable test result. </li></ul><ul><li>For example, with an 8Mbit service if we obtain a trained rate of only 512k we will want to indicate this as a failure </li></ul>
  21. 21. Service Connection Tests <ul><li>Up to eight Service Connections are supported. </li></ul><ul><li>Suited to Testing a single Data Connection </li></ul><ul><li>Ready To Test your Multi Service Connections such as IPTV. </li></ul>
  22. 22. QuickTest 100 ADSL2+ Tester The cost effective, feature rich, simple to use ADSL2+ Tester