Successfully reported this slideshow.
We use your LinkedIn profile and activity data to personalize ads and to show you more relevant ads. You can change your ad preferences anytime.

Voltage sensitive relay_12_v_140a_specification_24082014

3,205 views

Published on

BATTEK Voltage Sensitive Relay 12V 140A
Technical Specification
Wiring Diagram

Published in: Devices & Hardware
  • Be the first to comment

  • Be the first to like this

Voltage sensitive relay_12_v_140a_specification_24082014

  1. 1. BATTEK Battery Management System Website http://www.batteksystem.com Ebay http://stores.ebay.com/batteksystem Main Battery+ BATTERY 1 VEHICLE + BATTERY 2 AUXILIARY + ALTERNATOR OUTPUT BATTEK Voltage Sensitive Relay To vehical ignition system headlights, horn, etc. To auxiliary equipment stereo, lights, winch, etc. Auxiliary Battery Ground FUSE Optional Switch for Emergency Start (Not included) FUSE Voltage Sensitive Relay Features: - Designed for dual battery systems - Suitable for most 12V charging systems - Surge protection - Easy to install - Automatically sensing voltage level of main battery - Cut In Voltage: 13.3V - Cut Out Voltage: 12.8V - CE Certified Voltage Sensitive Relays have been specifically designed for a wide variety of automotive, truck and marine applications. The VSR units sense the input voltage generated and automatical- ly connect/disconnect the appliance or circuit at pre-set voltages, eliminating the possibility of discharging the primary starting battery. Constructed with a weatherproof body (IP65) and durable silver tipped contacts, the VSR units also feature surge protection and a L.E.D indicator designed to alert the user when the unit is engaged. VSR units are ideal for dual battery set-ups as they enable two bat- teries to be charged at the same time and then isolates the batteries from each other when the vehicle is turned off, ensuring your start- ing battery is always charged & ready to go. Typical installation: 68mm/2.68” Φ5mm / 0.2” 55mm / 2.15” 68mm / 2.68” 55mm/2.15” 49mm / 1.93” 10mm/0.39”

×