SET x10/X30 On Board   Data Collection   On Board Data Collection  using the COORD Program            sokkia            1
On Board Topo   Recommendations and Requirements    • SF14 Keypad is recommended    • A CP7 Tubular Compass is required  ...
On Board Topo   Plumb and Level Instrument over a    new control marker.    • You should read the first few sections of  ...
On Board Topo   When the needle is properly aligned    lock the Horizontal Motion    • Select F3 0SET.    • Now the encod...
On Board Topo   Selecting and Editing a Job Name    • Select the ESC key from the key pad or      instrument.    • Select...
On Board Topo   Select the Enter key when complete.   Use the ESC key to get back to the    Status Screen.              ...
On Board Topo   Select F1 MEAS   Rotate the instrument to the BS    Point and sight it on the target.    • Notice and jo...
On Board Topo   Tip    • Measure the Instrument and Prism      heights before beginning the data      collection process....
On Board Topo   Data Collection    • Select F4 Coord (on page 1)         Station Orientation         STN Coordinate (wh...
On Board Topo   F2 REC    • Edit   the   point Number if required.    • Edit   the   description if required.   OK   OK...
On Board Topo   Orientation (SET H ANGLE)   Highlight and Select SET H ANGLE    • Enter the value you wrote down earlier...
On Board Topo   Sight The BS Prism    • Highlight and select OBSERVATION    • ENTER   After the measurement is complete:...
On Board Topo   Select F1 OBS for the next    measurement and follow the steps    for editing the DESC and HTs.   Repeat...
On Board Topo   DATA TRANSFER    • Start Carlson XML on your Desktop    • Turn Instrument ON.    • Select MEM from the St...
On Board Topo• Set up the comm link;     Carlson XML       • Select Tools|Data Collectors| Sokkia SDR     Instrument    ...
On Board Topo   The only bumps in the road you may    experience with data transfer are comm    settings and time outs. ...
On Board Topo   Questions?                 sokkia    17
Upcoming SlideShare
Loading in …5
×

On board topo

1,116 views

Published on

Sokkia 630 RK SETTINGS

Published in: Technology, Business
0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total views
1,116
On SlideShare
0
From Embeds
0
Number of Embeds
3
Actions
Shares
0
Downloads
11
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

On board topo

  1. 1. SET x10/X30 On Board Data Collection On Board Data Collection using the COORD Program sokkia 1
  2. 2. On Board Topo Recommendations and Requirements • SF14 Keypad is recommended • A CP7 Tubular Compass is required • HI Tape • Note pad • This exercise assumes that there is no project control and we are starting a new job. sokkia 2
  3. 3. On Board Topo Plumb and Level Instrument over a new control marker. • You should read the first few sections of the manual to familiarize yourself with the basic operations of the instrument. • Install the CP7 Tubular Compass  Release the needle by twisting the silver nob atop the compass. Rotate the instrument until the needle splits the hash marks sokkia 3
  4. 4. On Board Topo When the needle is properly aligned lock the Horizontal Motion • Select F3 0SET. • Now the encoders on the instrument are zero at approximately magnetic north. We have now oriented the instrument and have made it ready for Topo. sokkia 4
  5. 5. On Board Topo Selecting and Editing a Job Name • Select the ESC key from the key pad or instrument. • Select F3 MEM  Select JOB  Use your arrows to highlight a JOB and then select EDIT. • Edit the name to reflect the desired designation. • Ensure that the Coord Job is the same as the one selected. sokkia 5
  6. 6. On Board Topo Select the Enter key when complete. Use the ESC key to get back to the Status Screen. sokkia 6
  7. 7. On Board Topo Select F1 MEAS Rotate the instrument to the BS Point and sight it on the target. • Notice and jot down the HAR value. This number will be used later in Station Orientation. sokkia 7
  8. 8. On Board Topo Tip • Measure the Instrument and Prism heights before beginning the data collection process. Jot these down along with the HAR value. sokkia 8
  9. 9. On Board Topo Data Collection • Select F4 Coord (on page 1)  Station Orientation  STN Coordinate (where the instrument is located) • F3 EDIT  Complete the required fields.  N, E, Z, Inst H and Tgt H.  OK to Accept sokkia 9
  10. 10. On Board Topo F2 REC • Edit the point Number if required. • Edit the description if required. OK OK sokkia 10
  11. 11. On Board Topo Orientation (SET H ANGLE) Highlight and Select SET H ANGLE • Enter the value you wrote down earlier. • ENTER • ESC Prepare for BS Measurement by checking the prism for proper installation and that it is plumb over the second new reference point. sokkia 11
  12. 12. On Board Topo Sight The BS Prism • Highlight and select OBSERVATION • ENTER After the measurement is complete: • REC  Edit Code field as required. • Highlight DESC and select EDIT. Select ENTER when complete. • Then OK. sokkia 12
  13. 13. On Board Topo Select F1 OBS for the next measurement and follow the steps for editing the DESC and HTs. Repeat this process until you are done. sokkia 13
  14. 14. On Board Topo DATA TRANSFER • Start Carlson XML on your Desktop • Turn Instrument ON. • Select MEM from the Status Screen  Connect the DOC 27 Download Cable to the instrument and the PC. sokkia 14
  15. 15. On Board Topo• Set up the comm link;  Carlson XML • Select Tools|Data Collectors| Sokkia SDR  Instrument • Select Comms Output Highlight the job, select Enter. The record on the far right will now indicate OUT. Select OK then the instrument will offer the type of file select SDR and then hit ENTER. sokkia 15
  16. 16. On Board Topo The only bumps in the road you may experience with data transfer are comm settings and time outs. Comm settings • Check them and make sure these are mirrored between the PC and Instrument. Time Out • Timing is everything. Try and time the final ENTER on the Instrument as close as possible to the keystrokes required by Carlson. sokkia 16
  17. 17. On Board Topo Questions? sokkia 17

×